7.0 Inch 1024*600 Web Camera Screen DT322X220034Z240202I/C/F

Specification

Features:

● Based on the T5L2 ASIC CPU, running the DGUS II human-machine interaction software platform, smart LCM for industrial-grade applications..

● 7.0-inch, 1024*600 resolution, 16.7M colors true-color display, IPS LCD screen.

● Supports H.264 encoded RTSP camera. Supports customization for up to 4 simultaneous displays.

● Capacitive touch/Resistive touch/No touch are available.

● Supports zooming function. Supports customized screen capture and screen video recording functions.

Send email to us Datasheet

Rated Power

Operating Voltage

12~36V, typical value of 12V

Operating Current

VCC=12V, max backlight

VCC=12V, backlight off

Recommended power supply: 12V 1A DC

Video

Model

Hardware and interface description

User interface	8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash	16MBytes (1*16MBytes NOR Flash), can be used to store user UI files such as fonts, images, music, etc., with erase/write cycles >100,000 times
Expand Flash pads	Three expansion slots are available, supporting expansion of NOR Flash and NAND Flash. The maximum expansion for NOR Flash is up to 64Mbytes. When combining NOR Flash and NAND Flash, the maximum expansion is up to 48Mbytes (using two expansion slots) + 512Mbytes
Buzzer	3V passive buzzer. Power: <1W
RTC	Super-capacitor supplies power to RTC, accuracy: ±20ppm @25℃. Can maintain normal operation for 7 days after power-off.
SD card slot 1	Supports downloading of all files (user UI files, CFG files, underlying kernel firmware), displays download statistics on the screen, download rate: 4 Mb/s. When downloading files, the SD card needs to be formatted in FAT32 format, with a recommended allocation unit size of 4096
SD card slot 2	Support saving camera image data (must using SD card when customizing screen recording or screenshot)
Wi-Fi module	Wi-Fi module: supports connecting webcam (2.4G, 5G)
PGT05 interface	Used for reprogramming the underlying DGUS firmware
Ethernet interface	Supports connecting webcam via router

Display Parameters

LCD Type	IPS process TFT display screen
Viewing Angle	Wide viewing angle (typical values are 85°/85°/85°/85°), high contrast, and good color reproduction
Resolution	1024×600 pixels（support 0°/90°/180°/270°）
Color	16.7M color (24-bit 8R8G8B)
Active Area (A.A.)	154.08mm (W)×85.92mm (H)
Interface	RGB
Backlight Mode	LED
Backlight Service Life	>20000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
Brightness	DT322X220034Z240202I: 250nit
	DT322X220034Z240202C: 250nit
	DT322X220034Z240202F: 300nit
Brightness Control	0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.

Touch Parameters

Type	CTP (Capacitive touch panel)
Interface	I²C
Structure	G+G structure with surface cover of tempered glass
Touch Mode	Single point touch and support continuous sliding touch
Surface Hardness	≥6H
Light Transmittance	>85%
Life	>20,000 hours

Type	RTP (Resistive touch panel)
Structure	ITO film + ITO glass
Touch Mode	Single point touch and support continuous sliding touch
Surface Hardness	＞3H
Light Transmittance	78%±3%
Life	Over 1,000,000 times touch

Serial Interface Parameters

Mode	UART2: RS232 UART4: RS232(Only available after OS configuration)
Voltage Level	Test Condition	Min	Typ	Max	Unit
	Output 1	-	-5.0	-3.0	V
	Output 0	3.0	5.0	-	V
	Input 1	-15.0	-5.0	-	V
	Input 0	-	5.0	-15.0	V
Baud Rate	3150~3225600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable	8Pin_2.0mm

Electrical specifications

Operating environment