Ukucaciswa
![Isifanekiso se-PCB sesiteshi samazwe ngamazwe](https://ecdn6.globalso.com/upload/p/1355/source/2024-06/667914c2de34767236.jpg)
![Isithombe sezinsiza 1](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f967d46dd8891077.jpg)
I-interface ye-LCM | FPC40_0.5mm, RGB interface |
I-interface ye-RTP | Ukuthinta okungazweli:4Pin_1.0mm interface |
Isixhumi esibonakalayo somsebenzisi | 8Pin_2.0mm isokhethi yokunikezwa kwamandla nokuxhumana kwe-serial. Izinga lokulanda(inani elijwayelekile): 12KByte/s |
I-Flash | 8MBytes NOR Flash, yamafonti, izithombe namafayela alalelwayo. Bhala kabusha umjikelezo: izikhathi ezingaphezu kuka-100,000 |
Nweba iFlash | I-Flash+512MBytes NAND Flash. Ukwandisa I-FLASH kudinga ukufaka esikhundleni esingu-8MBytes NOR Flash bese kuthi16MBytes NOR Flash ngaphambi kokuqhubeka nokunwetshwa. Ingakwazi ukusekela kufika ku-64MBytes NOR Flash noma 48MBytes NOR Flash+512MBytes NAND Flash |
I-Buzzer | 3V i-passive buzzer. Amandla: |
I-RTC | Iseli yenkinobho yokunikezwa kwamandla. Ukunemba: ±20ppm @25℃ |
Isixhumi esibonakalayo sekhadi le-SD | FAT32. Landa amafayela nge-SD interface ingaboniswa ngezibalo |
PGT05 interface | Uma umkhiqizo uphahlazeka ngengozi, ungasebenzisa i-PGT05 ukuze ubuyekeze i-DGUS kernel futhi wenze umkhiqizo ubuyele kokujwayelekile. |
Uhlobo lwe-LCD | I-TV-TN, TFT LCD |
I-engeli yokubuka | I-engeli yokubuka i-TV, 70°/70°/40°/30° (L/R/U/D) |
Isixazululo | 480×272 amaphikseli (isekela 0°/90°/180°/270°) |
Umbala | I-18-bit 6R6G6B |
Indawo esebenzayo (AA) | 95.00mm (W)×53.90mm (H) |
Imodi yokukhanya kwangemuva | I-LED |
I-Backlight Service Life | > Amahora angu-10000 (Isikhathi sokukhanya sibola sibe ngu-50% esimweni sokusebenza okuqhubekayo ngokukhanya okuphezulu) |
Ukukhanya | I-DMG48270C043_15WTR: 250nit |
Ukulawula Ukukhanya | Ibanga elingu-0~100 (Lapho ukukhanya kulungiswa kube ngu-1%~30% wokukhanya okuphezulu, ukucwayiza kungase kwenzeke futhi akunconywa ukuthi kusetshenziswe kulobu bubanzi) |
Qaphela: Ungasebenzisa izithombe zangemuva zesilondolozi sesikrini esiguqukayo ukuze ugweme imiphumela ebangelwa ukuboniswa kwekhasi elingashintshi isikhathi eside. |
Uhlobo | I-RTP (Iphaneli yokuthinta engazweli) |
Isakhiwo | LE filimu + LE ngilazi |
Imodi yokuthinta | Ukuthinta okukodwa nokusekela ukuthinta ngokuslayida okuqhubekayo |
Ukuqina Kobuso | 3H |
I-Light Transmittance | Ngaphezu kuka-80% |
Impilo | Izikhathi ezingaphezu kuka-1,000,000 zokuthinta |
Imodi |
I-UART2: RS232 I-UART4: RS485( Itholakala kuphela ngemva kokucushwa kwe-OS) | |||||
UART2 I-Voltage Level | Isimo sokuhlola | Okuncane | Uhlobo | Ubukhulu | Iyunithi | |
Okukhiphayo 1 | - | -5.0 | -3.0 | IN | ||
Okukhiphayo 0 | 3.0 | 5.0 | - | IN | ||
Okokufaka 1 | -15.0 | -5.0 | - | IN | ||
Okokufaka 0 | - | 5.0 | 15.0 | IN | ||
UART2 Isilinganiso se-Baud | 3150~3225600bps, inani elijwayelekile lika-115200bps | |||||
UART4 I-Voltage Level | Isimo sokuhlola | Okuncane | Uhlobo | Ubukhulu | Iyunithi | |
Okukhiphayo 1 | 2.5 | 5.0 | - | IN | ||
Okukhiphayo 0 | - | -5.0 | -2.5 | IN | ||
Okokufaka 1 | 0 | 2.5 | - | IN | ||
Okokufaka 0 | - | -2.5 | -0.2 | IN | ||
UART4 Isilinganiso se-Baud | 3150~921600bps, inani elijwayelekile elingu-115200bps | |||||
Ifomethi Yedatha |
UART2: N81 UART4: N81/E81/O81/N82 ,4 izindlela (ukucushwa kwe-OS) | |||||
Ikhebula le-Interface | 8Pin_2.0mm |
Amandla Alinganiselwe | ||||||
I-Voltage yokusebenza | 6~36V, inani elijwayelekile elingu-12V | |||||
Ukusebenza Kwamanje | 109mA | VCC=12V, ukukhanya kwangemuva okukhulu | ||||
50mA | VCC=12V, ukukhanya kwangemuva kuvaliwe | |||||
Ukunikezwa kwamandla okunconyiwe: 12V 1A DC |
Izinga Lokushisa Lokusebenza | -20℃~70℃ (12V @ 60% RH) | |||||
Izinga Lokushisa Lesitoreji | -30℃~80℃ | |||||
I-Conformal Coating | Lutho | |||||
Umswakama Osebenzayo | 10%~90%RH, inani elijwayelekile elingu-60% RH |