4.0 Intshi yeModeli yokuBonisa eBukrelekrele: DMG48480F040_02WTCZ02(Uthotho lweCOF) Umfanekiso okhoyo

4.0 Intshi yoMboniso woBuchule obukrelekrele: DMG48480F040_02WTCZ02(Uthotho lweCOF)

DWIN 480 * RGB * 480, COF LCD Bonisa

Iimbonakalo:

● Ngokusekelwe kwi-T5L0-Q88, eqhuba inkqubo ye-DGUS II.

● 4 intshi, 480 * 480 pixels isisombululo, 262K imibala, IPS-TFT-LCD, i-angle yokujonga ububanzi.

● Iphaneli yokucofa edibeneyo emnyama kunye ne-OCA ebondweyo capacitive.

● Ubume beCOF. Isiphaluka esisisiseko se-smart screen sigxininiswe kwi-FPC ye-LCM, ebonakaliswe ngokukhanya kunye nesakhiwo esincinci, ixabiso eliphantsi kunye nokuveliswa okulula.

Thumela i-imeyile kuthi Ishiti yedatha

Inkcazo

Iithegi zeMveliso

Inkcazo

Ithempleyithi yePCB yesitishi samazwe ngamazwe

Ulwazi lwe-ASIC

T5L0-Q88 ASIC

I-T5L0-Q88 ASIC yipakethe encinci, i-low-power, i-cost-effective, i-GUI kunye nesicelo esihlanganisiweyo esihlanganisiweyo-chipdual-core ASIC eyenzelwe yi-DWIN Technology ye-LCD encinci kunye nobunzima obuveliswe kwi-2023.

Bonisa

Umbala			262K imibala
Uhlobo lweLCD			IPS, TFT LCD
I-engile yokujonga			Ingelosi ebonayo ebanzi, ixabiso eliqhelekileyo lama-85°/85°/85°/85°(L/R/U/D)
Indawo yokubonisa (AA)			71.86mm (W)×70.18mm (H)
Isigqibo			480×480
Isibane ngasemva			I-LED
Ukuqaqamba			DMG48480F040_02WTCZ02:50nit

I-Voltage & yangoku

Amandla ombane			4.5~5.5V
Umsebenzi wangoku			280mA VCC=5V, max backlight
			100mA VCC=5V, isibane sangasemva sicinyiwe

Uvavanyo lokuthembeka

Ubushushu bokusebenza			-10℃~60℃
Ubushushu boGcino			-20℃~70℃
Ukufuma okusebenzayo			I-10% ~ 90% RH, ixabiso eliqhelekileyo le-60% ye-RH

Ujongano

Indawo yomsebenzisi			24Pin_0.5mm FPC
Ireyithi yeBaud			3150 ~ 3225600bps
Umbane ophumayo			Isiphumo 1;3.0~3.3 V
			Imveliso 0;0~0.3 V
Igalelo lombane			Igalelo 1;3.3V
			Igalelo 0;0~0.5V
Ujongano			UART2: TTL; UART3: TTL; (Ifumaneka kuphela emva koqwalaselo lwe-OS UART4: TTL; (Ifumaneka kuphela emva koqwalaselo lwe-OS)
Ubume beDatha			UART2: N81; UART3: N81/E81/O81/N82;4 iindlela (uqwalaselo lwe-OS) UART4: N81/E81/O81/N82;4 iindlela (uqwalaselo lwe-OS)

Ujongano lwangaphandle

I-PIN	Ingcaciso	Uhlobo	Inkcazo esebenzayo
1	CAN_TX	O	Ujongano lwe-CAN
2	CAN_RX	I	Ujongano lwe-CAN
3	TX3	O	UART3Isiphumo
4	RX3	I	UART3Igalelo
5	TX2	O	UART2 Isiphumo
6	RX2	I	UART2 Ungeniso
7	TR4	-	-
8	TX4	O	UART4 Isiphumo
9	RX4	I	UART4 Ungeniso
10	TX1	O	UART1 Isiphumo
11	RX1	I	UART1 Ungeniso
12	ADC0	I	Igalelo leADC . Isisombululo se-12-bit kwimeko yobonelelo lwamandla lwe-3.3V. 0-3.3V igalelo lombane.
13	ADC1	I
14	ADC6	I	Qhagamshela i-NTC ngaphakathi kwendawo ebiyelweyo
15	ADC7	I	Qhagamshela i-NTC ebekwe kudonga olubiyelweyo
16	PWM3	O	I-Buzzer/umqhubi wesithethi. I-resistor ye-10K yangaphandle kufuneka itsalwe phantsi emhlabeni ukuze kuqinisekiswe ukuba amandla ombane aphantsi.
17	GND	P	GND
18	GND	P	GND
19	+5V	P	Ukunikezelwa kwamandla, i-DC4.5-5.5V.
20	+5V	P	Ukunikezelwa kwamandla, i-DC4.5-5.5V.
amashumi amabini ananye	I²C_SDA	IO	I-RTC/isivamvo sokusondele/isivamvo sokufuma ukuphindaphinda.
amashumi anambini	I²C_SCL	IO
amashumi amabini anantathu	EX1	IO	Uphazamiseko lwangaphandle (INT1)
amashumi amabini anesine	EX0	IO	Uphazamiseko lwangaphandle (INT0)