8,88 Inch Bar UART LCD Display
DMG19480T088-01W(Mophato oa Liindasteri)

Tlhaloso

DWIN 480*RGB*1920,Industrial Bar Shape UART LCM

Likaroloana:

● E itšetlehile ka T5L2 ASIC e entsoeng ka boeena, 16.7M Color, 24bit;

● Sehlopha sa LCD sa boemo ba indasteri ea Bar Shape, se nang le seaparo se lumellanang;

● Mofuta oa Panel oa ho ama: Resistive kapa Capacitive;

● TTL/RS232 Interface,8Pin2.0mm terata ya kgokelo;

● Khoasolla ka karete ea SD kapa koung ea serial ea inthaneteng;

● Amohela DWIN DGUS V7.6 ho theha morero oa GUI, ha ho na tsebo ea ho ngola e hlokahalang;

● Ho tsamaisa tsamaiso ea DGUS II;

● IPS-TFT-LCD, Wide View Angle: 85/85/85/85 (L/R/U/D) ;

● E loketse ho tsamaisa koloi, lisebelisoa tsa kichineng, joalo-joalo;

Re romelle lengolo-tsoibila Leqephe la lintlha Lintlha tsa 3D

Rated Power

Voltage e sebetsang

6 ~ 36V, boleng bo tloaelehileng ba 12V

Ts'ebetso ea Hona Joale

VCC=12V, lebone le phahameng la morao

VCC=12V, lebone la morao le tima

Matla a khothalletsoang: 12V 1A DC

Video

Hardware le tlhaloso ea sebopeho

Sehokelo sa mosebelisi	8Pin_2.0mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s
Khanya	32MBytes (2*16MBytes NOR Flash), e ka sebelisoa ho boloka lifaele tsa UI tsa mosebelisi joalo ka lifonti, litšoantšo, mmino, joalo-joalo, ka li-cycle tsa ho hlakola/ho ngola>100,000 linako
Eketsa liphahlo tsa Flash	Ho na le libaka tse peli tsa katoloso, tse tšehetsang katoloso ea NOR Flash le NAND Flash. Katoloso e phahameng ea NOR Flash e fihla ho 64Mbytes. Ha o kopanya NOR Flash le NAND Flash, katoloso e phahameng e fihla ho 48Mbytes (ho sebelisa sebaka se le seng sa katoloso) + 512Mbytes
Buzzer	3V e etsang buzzer
RTC	Super-capacitor e fana ka matla ho RTC, ho nepahala: ± 20ppm @25 ℃. E ka boloka ts'ebetso e tloaelehileng matsatsi a 7 kamora ho tima. Reserved konopo selefouno phepelo e tsamaellanang potoloho.
Setšoantšo sa karete ea SD	E ts'ehetsa ho khoasolla lifaele tsohle (lifaele tsa UI tsa mosebelisi, lifaele tsa CFG, firmware ea kernel), e bonts'a lipalo-palo tsa khoaso skrineng, sekhahla sa khoaso: 4 Mb/s. Ha u khoasolla lifaele, karete ea SD e hloka ho hlophisoa ka sebopeho sa FAT32, ka boholo bo khothaletsoang ba kabo ea 4096.
Reserved module interface	E tšehetsa soldering ea WI-FI module le USB download module. Mohlala oa module oa WI-FI: WI-FI-10; Mefuta ea module ea USB: HDL702, HDL703
Sebopeho sa PGT05	E sebelisetsoa ho hlophisa bocha firmware ea DGUS

Hlahisa Parameters

Mofuta oa LCD	IPS e sebetsa skrineng sa TFT
Sheba Angle	Ponahalo e pharalletseng (litheko tse tloaelehileng ke 85°/85°/85°/85°), phapang e phahameng, le tlhahiso e ntle ea mebala.
Qeto	480×1920 dipikselse (0°/90°/180°/270°)
Mmala	16.7M mmala (24-bit 8R8G8B)
Sebaka se sebetsang (AA)	218.9mm (W)×54.7mm (H)
Sehokelo	MIPI
Backlight Mode	LED
Bophelo ba Tšebeletso ea Backlight	> Lihora tse 30000 (Nako ea khanya e senyehang ho isa ho 50% maemong a ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng)
Khanya	DMG19480T088_01WTC: 200nit
	DMG19480T088_01WTR: 150nit
	DMG19480T088_01WN: 250nit
Taolo ea Khanya	0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena)
Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele.

Tšoara Parameters

Mofuta	CTP (Capacitive touch panel)
Sehokelo	I²C
Sebopeho	Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng
Mokhoa oa ho ama	Ntlha e le 'ngoe ea ho ama le ho ts'ehetsa ho thella ho tsoelang pele
Bothata ba Sefahleho	6H
Khanya e fetisang	>90%
Bophelo	Ho ama makhetlo a fetang 1,000,000

Mofuta	RTP (Resistive touch panel)
Sebopeho	Filimi ENA + khalase ENA
Mokhoa oa ho ama	Ntlha e le 'ngoe ea ho ama le ho ts'ehetsa ho thella ho tsoelang pele
Bothata ba Sefahleho	3H
Khanya e fetisang	>80%
Bophelo	Ho ama makhetlo a fetang 1,000,000

Li-Parameters tsa Interface ea serial

Mokhoa	UART2: ON=TTL/CMOS; TLHOKOMELISO=RS232 UART4: ON=TTL/CMOS; OFF=RS232(E fumaneha feela ka mor'a tlhophiso ea OS)
Boemo ba Voltage	Boemo ba Teko	Min	Mofuta	Max	Yuniti
	Sephetho sa 1, Iout = -4mA	4.78	5.0	-	IN
	Sephetho 0, Iout = 4mA	-	-	0.4	IN
	Kenyelletso 1	2.5	5.0	-	IN
	Kenyeletso 0	-	-	1.0	IN
Baud Rate	3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps
Sebopeho sa data	UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS)
Cable ea Interface	8Pin_2.0mm

Litlhaloso tsa motlakase

Tikoloho ya tshebetso