Tlhaloso
| T5L1 ASIC | E ntlafalitsoe ke DWIN. Tlhahiso e kholo ka 2019,1MBytes Kapa Flash ho chip, 512KBytes e sebelisitsoeng ho boloka database ea basebelisi. Nako ea ho ngola bocha: e felile100,000 makhetlo |
| Khokahano ea LCM | FPC50_0.5mm, sebopeho sa RGB |
| Sehokelo sa RTP | Resistive touch panel: 4Pin_1.0mm segokanyimmediamentsi sa sebolokigolo |
| Sehokelo sa mosebelisi | 6Pin_3.81mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s |
| Khanya | 16MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
| Eketsa Flash | E ka hola ho fihla ho 64Mbytes NOR Flash kapa 48Mbytes NOR Flash+512Mbytes NAND Flash |
| Sebui | Sebuela-pele. Matla: |
| RTC | Super-capacitor bakeng sa phepelo ea motlakase. Ho nepahala: ±20ppm@25℃. E ka sebetsa ka mokhoa o tloaelehileng bakeng sa matsatsi a 7 ka mor'a ho tima matla |
| Sehokelo sa RTC se bolokiloeng | Sekema sa konopo ea tšehetso ea RTC |
| Khokahano ea karete ea SD | FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo. Sekhahla sa ho khoasolla: 4Mb/s |
| Reserved module interface |
Mojule oa Wi-Fi: hokela sethaleng sa leru ho ntlafatsa u le hole Mojule oa USB: khoasolla lifaele ka USB Flash disk |
| Sebopeho sa PGT05 | Ha sehlahisoa se senyeha ka kotsi, u ka sebelisa PGT05 ho ntlafatsa kernel ea DGUS le ho etsa hore sehlahisoa se khutlele ho se tloaelehileng. |
| Mofuta oa LCD | TN, TFT LCD |
| Viewing Angle | Tsela e tloaelehileng ea ho shebella, 70°/70°/50°/70° (L/R/U/D) |
| Qeto | 800×600 pixels (tšehetso 0°/90°/180°/270°) |
| Mmala | 24-bit 8R8G8B |
| Sebaka se sebetsang (AA) | 162.0mm (W) ×121.5mm (H) |
| Backlight Mode | LED |
| Bophelo ba Tšebeletso ea Backlight | > Lihora tse 30000 (Nako ea khanya e senyehang ho isa ho 50% boemong ba ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
| Khanya | DMG80600T080_15WTR: 300nit |
| Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho thothomela 'me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
| Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. | |
| Mofuta | RTP e nang le mehala e mene (Resistive touch panel) |
| Sebopeho | Filimi ENA + khalase ENA |
| Mokhoa oa ho ama | Tšehetso ea ntlha ea ho ama le ho hula |
| Bothata ba Sefahleho | 3H |
| Khanya e fetisang | Ho feta 80% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mokhoa |
UART2: RS232 UART4: RS485 (E fumaneha feela ka mor'a tlhophiso ea OS) | |||||
|
UART2 Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
| Sephetho 1 | - | -5.0 | -3.0 | IN | ||
| Sephetho 0 | 3.0 | 5.0 | - | IN | ||
| Kenyelletso 1 | -15.0 | -5.0 | - | IN | ||
| Kenyeletso 0 | - | 5.0 | 15.0 | IN | ||
|
UART2 Baud Rate | 3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps | |||||
|
UART4 Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
| Sephetho 1 | 2.5 | 5.0 | - | IN | ||
| Sephetho 0 | - | -5.0 | -2,5 | IN | ||
| Kenyelletso 1 | 0 | 2.5 | - | IN | ||
| Kenyeletso 0 | - | -2,5 | -0.2 | IN | ||
|
UART4 Baud Rate | 3150 ~ 921600bps, boleng bo tloaelehileng ba 115200bps | |||||
| Sebopeho sa data |
UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (O Sconfiguration) | |||||
| Cable ea Interface | 6Pin_3.81mm Sokete | |||||
| Rated Power | ||||||
| Voltage e sebetsang | 6 ~ 36V, boleng bo tloaelehileng ba 12V | |||||
| Ts'ebetso ea Hona Joale | 310mA | VCC=12V, lebone le phahameng la morao | ||||
| 100mA | VCC=12V, lebone la morao le tima | |||||
| Matla a khothalletsoang: 12V 1A DC | ||||||
| Mocheso oa ho sebetsa | -20℃~70℃ (12V @ 60% RH) | |||||
| Mocheso oa polokelo | -30 ℃ ~ 80 ℃ | |||||
| Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH | |||||
| Conformal Coating | Ee | |||||
| Boemo ba Tšireletso | IP65 (Ka pele) | |||||
