Tlhaloso
| T5L1 ASIC | E ntlafalitsoe ke DWIN. Tlhahiso e kholo ka 2019,1MBytes Kapa Flash ho chip, 512KBytes e sebelisitsoeng ho boloka database ea basebelisi. Nako ea ho ngola bocha: e felile100,000 makhetlo |
| Khokahano ea LCM | FPC50_0.5mm, sebopeho sa RGB |
| TP interface | Capacitive touch: IIC interface |
| Resissive touch: 4Pin_1.0mm segokanyimmediamentsi sa sebolokigolo | |
| Sehokelo sa mosebelisi | 10Pin_1.0mm latching socket bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s |
| Khanya | 16 MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
| Eketsa Flash | E ka hola ho fihla ho 64Mbytes NOR Flash kapa 48Mbytes NOR Flash+512Mbytes NAND Flash |
| Buzzer | 3V e etsang buzzer. Matla: |
| Khokahano ea karete ea SD | FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo. Sekhahla sa ho khoasolla: 4Mb/s |
| Reserved module interface |
Mojule oa Wi-Fi: hokela sethaleng sa leru ho ntlafatsa u le hole Mojule oa USB: khoasolla lifaele ka USB Flash disk |
| Sebopeho sa PGT05 | Ha sehlahisoa se senyeha ka kotsi, u ka sebelisa PGT05 ho ntlafatsa kernel ea DGUS le ho etsa hore sehlahisoa se khutlele ho se tloaelehileng. |
| Mofuta oa LCD | TN, TFT LCD |
| Viewing Angle | Tsela e tloaelehileng ea ho shebella, 70°/70°/50°/70° (L/R/U/D) |
| Qeto | 800×480 pixels (tšehetso 0°/90°/180°/270°) |
| Mmala | 24-bit 8R8G8B |
| Sebaka se sebetsang (AA) | 154.10mm (W)×85.90mm (H) |
| Backlight Mode | LED |
| Bophelo ba Tšebeletso ea Backlight | > Lihora tse 20000 (Nako ea khanya e senyehang ho isa ho 50% maemong a ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
| Khanya | DMG80480C070_03WTC: 250nit |
| DMG80480C070_03WTR: 250nit | |
| DMG80480C070_03WN: 300nit | |
| Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
| Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. | |
| Mofuta | CTP (Capacitive touch panel) |
| Sebopeho | Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng |
| Mokhoa oa ho ama | Thepa ea ntlha e le 'ngoe, tšehetsa ho thella ho tsoelang pele |
| Bothata ba Sefahleho | 6H |
| Khanya e fetisang | Ho feta 90% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mofuta | RTP (Resistive touch panel) |
| Sebopeho | Filimi ENA + khalase ENA |
| Mokhoa oa ho ama | Thepa ea ntlha e le 'ngoe, tšehetsa ho thella ho tsoelang pele |
| Bothata ba Sefahleho | 3H |
| Khanya e fetisang | Ho feta 80% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mokhoa |
UART2: ON=TTL/CMOS; TLHOKOMELISO=RS232 UART4: ON=TTL/CMOS; OFF=RS232(E fumaneha feela ka mor'a tlhophiso ea OS) | |||||
| Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
| Sephetho sa 1, Iout = 1mA | 3.0 | 3.3 | - | IN | ||
| Sephetho 0, Iout = -1mA | - | 0 | 0.3 | IN | ||
| Kenyeletso 1, Iin = 1mA | 2.4 | 3.3 | 5.0 | IN | ||
| Kenyelletso 0, Iin = -1mA | 0 | - | 0.5 | IN | ||
| Baud Rate | 3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps | |||||
| Sebopeho sa data |
UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS) | |||||
| Cable ea Interface | 10Pin_1.0mm | |||||
| Rated Power | ||||||
| Voltage e sebetsang | 4.5 ~ 5.5V, boleng bo tloaelehileng ba 5V | |||||
| Ts'ebetso ea Hona Joale | 610mA | VCC=5V, mabone a phahameng a morao | ||||
| 160mA | VCC=5V, lebone la morao le tima | |||||
| Matla a khothaletsoang: 5V 1A DC | ||||||
| Mocheso oa ho sebetsa | -20℃~70℃ (5V @ 60% RH) | |||||
| Mocheso oa polokelo | -30 ℃ ~ 80 ℃ | |||||
| Conformal Coating | Ha ho letho | |||||
| Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH | |||||
Mohlala: DMG80600Y121-01N (Mophato oa botle)
