Tlhaloso
Li-Parameters tsa Taolo ea Master
Thepa | Mekhahlelo |
Boemo ba boardboard | Tsa khoebo |
CPU | RK3566, Cortex-A55, quad-core |
Uena | Android 11 |
LEHLANYA | 8Gbytes EMMC |
RAM | 2Gbytes DDR4 |
Hlahisa Parameters
Thepa | Mekhahlelo | Tlhaloso |
Mmala | 16.7M (16777216) mebala | 24 bit mmala 8R8G8B |
Mofuta oa Panel | IPS | Ts'ebetso ea IPS, TFT LCM e nang le pono e pharalletseng |
Viewing Angle | 85/85/85/85 (L/R/U/D) | Pono e Ntle ka ho Fetisisa: symmetrical |
Sebaka se sebetsang (AA) | 94.20mm (W)*150.72mm (H) | 800 * 1280 Pixel |
Sebaka se Bonahalang (VA) | 94.60mm (W)*151.12mm (H) | 800 * 1280 Pixel |
Qeto | 800 * 1280 Pixel | E fumaneha bakeng sa 0°/90°/180°/270° pontsho e fetotsweng |
Backlight | LED | ≥20000H (nako ea khanya e senyehang ho isa ho 50% boemong ba ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
Khanya | 300unit | Litokiso tsa maemo a 100 (Ha ho khothalletsoe ho beha khanya ho 1% ~ 30% ea boholo, e leng se ka lebisang ho LCD flicker.) |
Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. |
Voltage & ea Hona joale
Thepa | Maemo | Min | Mofuta. | Max | Yuniti |
Motlakase oa Matla | - | 7.0 | 12.0 | 23.0 | IN |
Ts'ebetso ea Hona joale | VCC = +12V, Backlight on | - | 260 | - | mA |
VCC = +12V, Backlight tima | - | 110 | - | mA | |
Matla a khothalletsoang: 12V 1A DC |
Teko ea ho Tšepahala
Thepa | Maemo | Min | Mofuta. | Max | Yuniti |
Mocheso oa Mosebetsi | 60% RH ka motlakase oa 12V | -10 | 25 | 50 | ℃ |
Mocheso oa polokelo | - | -15 | 25 | 55 | ℃ |
Mongobo o sebetsang | 25 ℃ | 10% | 60% | 90% | RH |
Pente e Sireletsang | Ee | ||||
ESD | Phello ea moea ± 8KV, Ts'ebetso ea ho kopana ± 6K | ||||
MONA | Sehlopha sa B |
Li-peripherals le li-interfaces
Thepa | Mekhahlelo | Tlhaloso |
Sehokelo | 2-tsela RS232 | UART5 & UART9 |
1-tsela RS485 | UART8 | |
1-tsela TTL/COMS | UART0 | |
Sesebelisoa sa USB | 3-tsela | HOST*2,OTG*1 |
Sehokelo sa Li-headphone | 1-tsela | 3.5mm segokanyimmediamentsi sa sebolokigolo |
Sebui Interface | 1-tsela | 2Pin_1.25mm segokanyimmediamentsi sa sebolokigolo |
Sebopeho sa Microphone | 1-tsela | 2Pin_1.25mm segokanyimmediamentsi sa sebolokigolo |
Sehokelo sa Khamera | 1-tsela | USB |
SD Card Interface | 1-tsela | Sekotjana sa karete ea mofuta oa Drawer (Max 64G) |
LAN Interface | 1-tsela | 10/100Mbps |
WIFI module | 1-tsela | IEEE 802.11Bb/g/n,2.4G,Bluetooth |
RTC | 1-tsela | Konopo cell bakeng sa phepelo ea motlakase. Ho nepahala: ±20ppm @25℃ |
Sehokelo
Thepa | Maemo | Min | Mofuta. | Max | Yuniti |
Baud Rate | User Set | 2400 | 115200 | 230440 | bps |
Output Voltage(TXD) | Sephetho 1 | - | -5.0 | - | IN |
Sephetho 0 | - | 5.0 | - | IN | |
Input Voltage(RXD) | Kenyelletso 1 | - | -5.0 | - | IN |
Kenyeletso 0 | - | 5.0 | - | IN | |
Baud Rate | User Set | 2400 | 115200 | 921600 | bps |
(V_AB) | Sephetho 1 | 2.5 | 5.0 | - | IN |
Sephetho 0 | - | -5.0 | -2,5 | IN | |
(V_AB) | Kenyelletso 1 | 0 | 2.5 | - | IN |
Kenyeletso 0 | - | -2,5 | -0.2 | IN | |
Sehokelo | Ts'ehetsa boemo ba TTL/COMS, RS232 kapa RS485 | ||||
Soketeng | 10Pin_3.81mm Sokete |
Bokhoni ba ho paka & Bophahamo
Boemo | ||||
Boemo | 112.2(W)*186.9(H)*21.9(T)mm | |||
Boima bo kahare | 305g | |||
Bokhoni ba ho paka | ||||
Mohlala | Boholo | Lera | Bongata/ Lera | Bongata(Pcs) |
Lebokose la 1: | 220mm(L)*160mm(W)*47mm (H) | - | - | - |
Lebokose la 2: | 250mm(L)*200mm(W)*80mm (H) | 2 | 1 | 2 |
Lebokose la 3: | 320mm(L)*270mm(W)*80mm (H) | 2 | 2 | 4 |
Carton4: | 450mm(L)*350mm(W)*300mm(H) | 1 | 20 | 20 |
Carton5: | 600mm(L)*450mm(W)*300mm(H) | 1 | 34 | 34 |