Tlhaloso
| T5L2 ASIC | E ntlafalitsoe ke DWIN. Tlhahiso e kholo ka 2019,1MBytes Kapa Flash ho chip, 512KBytes e sebelisitsoeng ho boloka database ea basebelisi. Nako ea ho ngola bocha: e felile100,000 makhetlo |
| Khokahano ea LCM | FPC50_0.5mm, sebopeho sa RGB |
| TP interface | Capacitive touch: sebopeho sa COB, sebopeho sa IIC |
| Resissive touch: 4Pin_1.0mm segokanyimmediamentsi sa sebolokigolo | |
| Sehokelo sa mosebelisi | 8Pin_2.0mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s |
| Khanya | 16 MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
| Buzzer | 3V e etsang buzzer. Matla: |
| RTC | Konopo cell bakeng sa phepelo ea motlakase, Ho nepahala: ±20ppm @25℃ |
| Khokahano ea karete ea SD 1 | R11 SD karete segokanyimmediamentsi sa sebolokigolo, e tšehetsa ho boloka screenshot data ya ditshwantsho |
| Khokahano ea karete ea SD 2 | FAT32, khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo, sekhahla sa ho jarolla: 4Mb/s |
| Khokahano e nyane ea USB | Bakeng sa ho chesa firmware ea R11 |
| Sehokelo sa USB | Sehokelo sa USB se otlolohileng, se sebedisetsoa ho chesa firmware ea R11 |
| Sebuela-hole | Mosebetsi ha o so buloe (NC) |
| Debug interface | 4Pin_ 2.54mm segokanyimmediamentsi sa sebolokigolo, RX0, TX0, SPIO debug interface |
| Khokahano ea khamera | Horizontal 2pin_ 2.0mm * 1 le vertical 2Pin_ 2.54mm* 1 (1080P AHD HD tlhahiso ea analog, li-terminals tse peli, li tšehetsa lintlha tse 1/2, li tšehetsa pontšo ea ho fetola ha e hokahane le likanale tse peli, 'me ha e tšehetse likanale tse peli tsa pontšo e le 'ngoe ea skrine) |
| Mofuta oa LCD | IPS, TFT LCD |
| Viewing Angle | Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85° (L/R/U/D) |
| Qeto | 1280×800 pixels (tšehetso 0°/90°/180°/270°) |
| Mmala | 24-bit 8R8G8B |
| Sebaka se sebetsang (AA) | 149.8mm (W) × 93.6mm (H) |
| Backlight Mode | LED |
| Bophelo ba Tšebeletso ea Backlight | > Lihora tsa 20000 (Nako ea khanya e senyehang ho 50% boemong ba ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
| Khanya | DMG12800T070_27WTC: 250nit |
| DMG12800T070_27WTR: 250nit | |
| Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
| Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. | |
| Mofuta | CTP (Capacitive touch panel) |
| Sebopeho | Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng |
| Mokhoa oa ho ama | Tšehetso ea ntlha ea ho ama le ho hula |
| Bothata ba Sefahleho | 6H |
| Khanya e fetisang | Ho feta 90% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mofuta | RTP (Resistive touch panel) |
| Sebopeho | Filimi ENA + khalase ENA |
| Mokhoa oa ho ama | Tšehetso ea ntlha ea ho ama le ho hula |
| Bothata ba Sefahleho | 3H |
| Khanya e fetisang | Ho feta 80% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mokhoa |
UART2: ON=TTL/CMOS; OFF=RS232(Defaulted RS232) UART4: ON=TTL/CMOS; OFF=RS232(E fumaneha feela ka mor'a tlhophiso ea OS) | |||||
| Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
| Sephetho sa 1, Iout = -4mA | 2.7 | 3.2 | - | IN | ||
| Sephetho 0, Iout = 4mA | - | 0.1 | 0.4 | IN | ||
| Kenyelletso 1 | 2.4 | 3.3 | 5.5 | IN | ||
| Kenyeletso 0 | 0 | - | 1.0 | IN | ||
| Baud Rate | 3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps | |||||
| Sebopeho sa data |
UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS) | |||||
| Cable ea Interface | 8Pin_2.0mm | |||||
| Rated Power | ||||||
| Voltage e sebetsang | 8 ~ 36V, boleng bo tloaelehileng ba 12V | |||||
| Ts'ebetso ea Hona Joale | 440mA | VCC=12V, lebone le phahameng la morao | ||||
| 160mA | VCC=12V, lebone la morao le tima | |||||
| Matla a khothalletsoang: 12V 1A DC | ||||||
| Mocheso oa ho sebetsa | -20℃~70℃ (12V @ 60% RH) | |||||
| Mocheso oa polokelo | -30 ℃ ~ 80 ℃ | |||||
| Conformal Coating | Ee | |||||
| Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH | |||||
