Tlhaloso
| Sehokelo sa mosebelisi | 10Pin_1.0mm latching socket bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s |
| Khanya | 16 MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
| Eketsa liphahlo tsa Flash | Ho na le libaka tse tharo tsa katoloso, tse tšehetsang katoloso ea NOR Flash le NAND Flash. Katoloso e phahameng ea NOR Flash e fihla ho 64Mbytes. Ha o kopanya NOR Flash le NAND Flash, katoloso e phahameng e fihla ho 48Mbytes (ho sebelisa libaka tse peli tsa katoloso) + 512Mbytes. |
| Buzzer | 3V e etsang buzzer |
| Setšoantšo sa karete ea SD | E ts'ehetsa ho khoasolla lifaele tsohle (lifaele tsa UI tsa mosebelisi, lifaele tsa CFG, firmware ea kernel), e bonts'a lipalo-palo tsa khoaso skrineng, sekhahla sa khoaso: 4 Mb/s. Ha u khoasolla lifaele, karete ea SD e hloka ho hlophisoa ka sebopeho sa FAT32, ka boholo bo khothaletsoang ba kabo ea 4096. |
| Reserved module interface | E tšehetsa soldering ea WI-FI module le USB download module. Mohlala oa module oa WI-FI: WI-FI-10; Mefuta ea module ea USB: HDL702, HDL703 |
| Sebopeho sa PGT05 | E sebelisetsoa ho hlophisa bocha firmware ea DGUS |
| Mofuta oa LCD | TN e sebetsa skrineng sa TFT LCD |
| Viewing Angle | Tsela e tloaelehileng ea ho shebella, 70°/70°/50°/70° (L/R/U/D) |
| Qeto | 800×480 pixels (0°/90°/180°/270°) |
| Mmala | 16.7M mebala (24-bit 8R8G8B) |
| Sebaka se sebetsang (AA) | 108.0mm (W)×64.8mm (H) |
| Sehokelo | RGB |
| Backlight Mode | LED |
| Bophelo ba Tšebeletso ea Backlight | > Lihora tse 20000 (Nako ea khanya e senyehang ho isa ho 50% maemong a ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
| Khanya | DMG80480C050_03WTC: 250nit |
| DMG80480C050_03WTR: 250nit | |
| DMG80480C050_03WN: 300nit | |
| Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
| Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. | |
| Mofuta | CTP (Capacitive touch panel) |
| Sehokelo | I²C |
| Sebopeho | Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng |
| Mokhoa oa ho ama | Ntlha e le 'ngoe ea ho ama le ho ts'ehetsa ho thella ho tsoelang pele |
| Bothata ba Sefahleho | 6H |
| Khanya e fetisang | >90% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mofuta | RTP (Resistive touch panel) |
| Sebopeho | Filimi ENA + khalase ENA |
| Mokhoa oa ho ama | Ntlha e le 'ngoe ea ho ama le ho ts'ehetsa ho thella ho tsoelang pele |
| Bothata ba Sefahleho | 3H |
| Khanya e fetisang | >80% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mokhoa |
UART2: ON=TTL/CMOS; TLHOKOMELISO=RS232 UART4: ON=TTL/CMOS; OFF=RS232(E fumaneha feela ka mor'a tlhophiso ea OS) | |||||
| Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
| Sephetho sa 1, Iout = -4mA | 2.7 | 3.2 | - | IN | ||
| Sephetho 0, Iout = 4mA | - | 0.1 | 0.4 | IN | ||
| Kenyelletso 1 | 2.4 | 3.3 | 5.5 | IN | ||
| Kenyelletso 0 | - | - | 1.0 | IN | ||
| Baud Rate | 3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps | |||||
| Sebopeho sa data |
UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS) | |||||
| Cable ea Interface | 10Pin_1.0mm | |||||
| Rated Power | ||||||
| Voltage e sebetsang | 4.5 ~ 5.5V, boleng bo tloaelehileng ba 5V | |||||
| Ts'ebetso ea Hona Joale | 240mA | VCC=5V, mabone a phahameng a morao | ||||
| 70mA | VCC=5V, lebone la morao le tima | |||||
| Matla a khothaletsoang: 5V 1A DC | ||||||
| Mocheso oa ho sebetsa | -20℃~70℃ (5V @ 60% RH) | |||||
| Mocheso oa polokelo | -30 ℃ ~ 80 ℃ | |||||
| Conformal Coating | Ha ho letho | |||||
| Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH | |||||
