Tlhaloso
Che. | Lebitso | Tlhaloso |
1 | T5L0 ASIC | E ntlafalitsoe ke DWIN. Tlhahiso e kholo ka 2020,1MBytes Kapa Flash ho chip, 512KBytes e sebelisitsoeng ho boloka database ea basebelisi. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
2 | COF Interface | FPC40_0.5mm |
3 | Mosebelisi | 4Pin_2.0mm sokete bakeng sa phepelo ea motlakase le puisano ea serial. Sekhahla sa ho khoasolla(boleng bo tloaelehileng): 12KByte/s |
4 | Khanya | 16MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
5 | Sebui | Sebui se Hahelletsoeng, 8Ω1W |
6 | SD Interface | FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo.Sekhahla sa ho jarolla: 4Mb/s |
7 | RTC | Super-capacitor bakeng sa phepelo ea motlakase. Ho nepahala: ±20ppm @25℃. E ka sebetsa ka mokhoa o tloaelehileng bakeng sa matsatsi a 7 ka mor'a ho tima matla |
8 | WIFI module | Etsa mojule oa WBR3 |
Mofuta oa LCD | IPS, TFT LCD |
Viewing Angle | Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85° (L/R/U/D) |
Qeto | 480*480 pixels (0°/90°/180°/270°) |
Mmala | 18-bit 6R6G6B |
Sebaka se sebetsang (AA) | 71.9mm (W) * 68.0mm (H) |
Backlight Mode | LED |
Bophelo ba Tšebeletso ea Backlight | > Lihora tsa 20000 (Nako ea khanya e senyehang ho 50% boemong ba ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
Khanya | 250n |
Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho thothomela 'me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. |
Mofuta | CTP (Capacitive touch panel) |
Sebopeho | Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng |
Mokhoa oa ho ama | Thepa ea ntlha e le 'ngoe, tšehetsa ho thella ho tsoelang pele |
Bothata ba Sefahleho | 6H |
Khanya e fetisang | Ho feta 90% |
Bophelo | Ho ama makhetlo a fetang 1,000,000 |
Mokhoa | RS485 | ||||
Boemo ba Voltage | Boemo ba Teko | Min | Mofuta. | Max | Yuniti |
Sephetho 1 | 2.5 | 5.0 | - | IN | |
Sephetho 0 | - | -5.0 | -2,5 | IN | |
Kenyelletso 1 | 0 | 2.5 | - | IN | |
Kenyeletso 0 | - | -2,5 | -0.2 | IN | |
Baud Rate | 3150 ~ 921600bps, boleng bo tloaelehileng ba 115200bps | ||||
Sebopeho sa data | N81 | ||||
Cable ea Interface | 4Pin_2.0mm |
Rated Power | ||
Voltage e sebetsang | 6 ~ 36V, boleng bo tloaelehileng ba 12V | |
Ts'ebetso ea Hona Joale | 190mA | VCC=12V, lebone le phahameng la morao |
80mA | VCC=12V, lebone la morao le tima | |
Matla a khothalletsoang: 12V 0.5A DC |
Mocheso oa ho sebetsa | -10℃~60℃ (12V @ 60% RH) |
Mocheso oa polokelo | -20 ℃ ~ 70 ℃ |
Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH |
Conformal Coating | Ee |
Ntho ea Teko | Boemo ba Teko | Sephetho |
MONA | Sehlopha sa B | Tshebetso e tlwaelehileng |
RE | Sehlopha sa A | Tshebetso e tlwaelehileng |
CS | 10Vrms 0.15MHz-80MHz 80% AM ho 1kHz | Tshebetso e tlwaelehileng |
Ho phahama | ±1kV (AC) | Tshebetso e tlwaelehileng |
ESD | Phello ea moea ± 8kV | Tshebetso e tlwaelehileng |
EFT | ± 2kV (AC) | Tshebetso e tlwaelehileng |
Sebopeho sa Foromo | 86.0mm(W)*87.2mm (H)*16.9(T)mm |
Boima bo kahare | 105g |
Ntho | Tlhaloso | Bongata |
Pontšo | TC040C17W00Z01 | 1 |
Mohala o hokelang | HDL65071 (Polaka e habeli ea 4-pin 2.0, terata e tšoanang e lehlakoreng, 50CM) | 1 |
Round Head Screw | M4 * 25 limilimithara | 2 |