Tlhaloso
| Che. | Lebitso | Tlhaloso |
| 1 | T5L0 ASIC | E ntlafalitsoe ke DWIN. Tlhahiso e kholo ka 2020,1MBytes Kapa Flash ho chip, 512KBytes e sebelisitsoeng ho boloka database ea basebelisi. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
| 2 | COF Interface | FPC40_0.5mm |
| 3 | Mosebelisi | 4Pin_2.0mm sokete bakeng sa phepelo ea motlakase le puisano ea serial. Sekhahla sa ho khoasolla(boleng bo tloaelehileng): 12KByte/s |
| 4 | Khanya | 16MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
| 5 | Sebui | Sebui se Hahelletsoeng, 8Ω1W |
| 6 | SD Interface | FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo.Sekhahla sa ho jarolla: 4Mb/s |
| 7 | RTC | Super-capacitor bakeng sa phepelo ea motlakase. Ho nepahala: ±20ppm @25℃. E ka sebetsa ka mokhoa o tloaelehileng bakeng sa matsatsi a 7 ka mor'a ho tima matla |
| 8 | WIFI module (Ha ho boikhethelo) | WIFI-10 module, hokela sethaleng sa leru ho ntlafatsa u le hole |
| Mofuta oa LCD | IPS, TFT LCD |
| Viewing Angle | Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85° (L/R/U/D) |
| Qeto | 480*480 pixels (0°/90°/180°/270°) |
| Mmala | 18-bit 6R6G6B |
| Sebaka se sebetsang (AA) | 71.9mm (W) * 68.0mm (H) |
| Backlight Mode | LED |
| Bophelo ba Tšebeletso ea Backlight | > Lihora tsa 20000 (Nako ea khanya e senyehang ho 50% boemong ba ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
| Khanya | 250n |
| Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho thothomela 'me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
| Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. | |
| Mofuta | CTP (Capacitive touch panel) |
| Sebopeho | Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng |
| Mokhoa oa ho ama | Thepa ea ntlha e le 'ngoe, tšehetsa ho thella ho tsoelang pele |
| Bothata ba Sefahleho | 6H |
| Khanya e fetisang | Ho feta 90% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mokhoa | RS485 | ||||
| Boemo ba Voltage | Boemo ba Teko | Min | Mofuta. | Max | Yuniti |
| Sephetho 1 | 2.5 | 5.0 | - | IN | |
| Sephetho 0 | - | -5.0 | -2,5 | IN | |
| Kenyelletso 1 | 0 | 2.5 | - | IN | |
| Kenyelletso 0 | - | -2,5 | -0.2 | IN | |
| Baud Rate | 3150 ~ 921600bps, boleng bo tloaelehileng ba 115200bps | ||||
| Sebopeho sa data | N81 | ||||
| Cable ea Interface | 4Pin_2.0mm | ||||
| Rated Power | ||
| Voltage e sebetsang | 6 ~ 36V, boleng bo tloaelehileng ba 12V | |
| Ts'ebetso ea Hona Joale | 190mA | VCC=12V, lebone le phahameng la morao |
| 80mA | VCC=12V, lebone la morao le tima | |
| Matla a khothalletsoang: 12V 0.5A DC | ||
| Mocheso oa ho sebetsa | -10℃~60℃ (12V @ 60% RH) |
| Mocheso oa polokelo | -20 ℃ ~ 70 ℃ |
| Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH |
| Conformal Coating | Ee |
| Ntho ea Teko | Boemo ba Teko | Sephetho |
| MONA | Sehlopha sa B | Tshebetso e tlwaelehileng |
| RE | Sehlopha sa A | Tshebetso e tlwaelehileng |
| CS | 10Vrms 0.15MHz-80MHz 80% AM ho 1kHz | Tshebetso e tlwaelehileng |
| Ho phahama | ±1kV (AC) | Tshebetso e tlwaelehileng |
| ESD | Phello ea moea ± 8kV | Tshebetso e tlwaelehileng |
| EFT | ± 2kV (AC) | Tshebetso e tlwaelehileng |
| Sebopeho sa Foromo | 86.0mm(W)*87.2mm (H)*16.9(T)mm |
| Boima bo kahare | 105g |
| Ntho | Tlhaloso | Bongata |
| Pontšo | TC040C17W00(U00) | 1 |
| Mohala o hokelang | HDL65071 (Polaka e habeli ea 4-pin 2.0, terata e tšoanang e lehlakoreng, 50CM) | 1 |
| Round Head Screw | M4 * 25 limilimithara | 2 |
