Tlhaloso
| Khokahano ea LCM | FPC40_0.5mm, sebopeho sa RGB |
| TP interface | Capacitive touch: sebopeho sa COB, sebopeho sa IIC |
| Resissive touch: 4Pin_1.0mm segokanyimmediamentsi sa sebolokigolo | |
| Sehokelo sa mosebelisi | 8Pin_2.0mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s |
| Khanya | 16MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
| Eketsa Flash | E ka atolosoa ho 64Mbytes NOR Flash kapa 48Mbytes NOR Flash+512Mbytes NAND Flash.Ha o atolosa Flash, likarolo tse kang li-decoder le capacitor li hloka ho rekisoa. Ka kopo ikopanye le morekisi ea tsamaellanang le eena bakeng sa ho itlhophisa (E fumaneha ka har'a sekoaelo sa shielding) |
| Buzzer | 3V e etsang buzzer. Matla: |
| RTC | Super-capacitor bakeng sa phepelo ea motlakase. Ho nepahala: ±20ppm@25℃. E ka sebetsa ka mokhoa o tloaelehileng bakeng sa matsatsi a 7 ka mor'a ho tima matla |
| Khokahano ea karete ea SD | FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo. Sekhahla sa ho khoasolla: 4Mb/s |
| Reserved module interface |
Mojule oa Wi-Fi: hokela sethaleng sa leru ho ntlafatsa u le hole; Mojule oa USB: khoasolla lifaele ka USB Flash disk |
| Sebopeho sa PGT05 | Ha sehlahisoa se senyeha ka kotsi, u ka sebelisa PGT05 ho ntlafatsa kernel ea DGUS le ho etsa hore sehlahisoa se khutlele ho se tloaelehileng. |
| Mofuta oa LCD | IPS, TFT LCD |
| Sheba Angle | Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85°(L/R/U/D) |
| Qeto | 480×800 pixels (tšehetso 0°/90°/180°/270°) |
| Mmala | 18-bit 6R6G6B |
| Sebaka se sebetsang (AA) | 93.60mm (W)×56.16mm (H) |
| Backlight Mode | LED |
| Bophelo ba Tšebeletso ea Backlight | > Lihora tse 30000 (Nako ea khanya e senyehang ho isa ho 50% maemong a ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
| Khanya | DMG80480T043_09WTC: 800nit |
| DMG80480T043_09WTR: 700nit | |
| DMG80480T043_09WN: 900nit | |
| Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
| Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. | |
| Mofuta | CTP (Capacitive touch panel) |
| Sebopeho | Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng |
| Mokhoa oa ho ama | Thepa e le 'ngoe le ts'ehetso e tsoelang pele ea ho thella |
| Bothata ba Sefahleho | 6H |
| Khanya e fetisang | Ho feta 90% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mofuta | RTP (Resistive touch panel) |
| Sebopeho | Filimi ENA + khalase ENA |
| Mokhoa oa ho ama | Thepa e le 'ngoe le ts'ehetso e tsoelang pele ea ho thella |
| Bothata ba Sefahleho | 3H |
| Khanya e fetisang | Ho feta 80% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mokhoa |
UART2: ON=TTL/CMOS; TLHOKOMELISO=RS232 UART4: ON=TTL/CMOS; OFF=RS232(E fumaneha feela ka mor'a tlhophiso ea OS) | |||||
| Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
| Sephetho sa 1, Iout = -4mA | 4.78 | 5.0 | - | IN | ||
| Sephetho 0, Iout = 4mA | - | - | 0.4 | IN | ||
| Kenyelletso 1 | 2.5 | 5.0 | - | IN | ||
| Kenyeletso 0 | 0 | - | 1.0 | IN | ||
| Baud Rate | 3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps | |||||
| Sebopeho sa data |
UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS) | |||||
| Cable ea Interface | 8Pin_2.0mm | |||||
| Rated Power | ||||||
| Voltage e sebetsang | 6 ~ 36V, boleng bo tloaelehileng ba 12V | |||||
| Ts'ebetso ea Hona Joale | 200mA | VCC=12V, lebone le phahameng la morao | ||||
| 65mA | VCC=12V, lebone la morao le tima | |||||
| Matla a khothalletsoang: 12V 1A DC | ||||||
| Mocheso oa ho sebetsa | -10℃~60℃ (12V @ 60% RH) | |||||
| Mocheso oa polokelo | -20 ℃ ~ 70 ℃ | |||||
| Anti-UV | Ee | |||||
| Conformal Coating | Ee | |||||
| Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH | |||||
