4.0 Inch HMI Touch Panel DMG80480C040_03W(Kreiti ya Khoebo)

Tlhaloso

DWIN 480*RGB*800, UART Display

Likaroloana:

● E itšetlehile ka T5L1, e tsamaisang tsamaiso ea DGUS II, boemo ba khoebo,

● Resistive / Capacitive/No touch, 16.7M Colours, 24bit,480×800 pixel;

● UART2: TTL/CMOS;UART4: TTL/CMOS ;

● Khoasolla ka karete ea SD kapa koung ea serial ea inthaneteng;

● Sesebelisoa sa DWIN DGUS V7.6 se bonolo ho se sebelisa ho etsa GUI;

● Mokhoa oa Ntšetso-pele ea Bobeli: DGUS II / TA (Seteishene sa litaelo);

● IPS View angle: 85°/85°/85°/85° (L/R/U/D);

● Ka GUI & OS dual-core, GUI e nang le li-control tse ruileng, e tšehetsa lihlahisoa tse entsoeng ka botsona tse thehiloeng ho T5L.

Re romelle lengolo-tsoibila Leqephe la lintlha Lintlha tsa 3D

Rated Power

Voltage e sebetsang

4.5 ~ 5.5V, boleng bo tloaelehileng ba 5V

Ts'ebetso ea Hona Joale

VCC=5V, lebone le phahameng la morao

VCC=5V, lebone la morao le tima

Matla a khothalletsoang: 5V 1A DC

Video

Hardware le tlhaloso ea sebopeho

Khokahano ea LCM	FPC40_0.5mm, sebopeho sa RGB
TP interface	Capacitive touch: IIC interface
TP interface	Tšoaro e hanyetsanang: FPC4_1.0mm
Sehokelo sa mosebelisi	10Pin_1.0mm latching socket bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s
Khanya	16 MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000
Eketsa Flash	E ka hola ho fihla ho 64Mbytes NOR Flash kapa 48Mbytes NOR Flash+512Mbytes NAND Flash
Buzzer	3V e etsang buzzer.
Khokahano ea karete ea SD	E ts'ehetsa ho khoasolla lifaele tsohle (lifaele tsa UI tsa mosebelisi, lifaele tsa CFG, firmware ea kernel), e bonts'a lipalo-palo tsa khoaso skrineng, sekhahla sa khoaso: 4Mb/s. Ha u khoasolla lifaele, karete ea SD e hloka ho hlophisoa ka sebopeho sa FAT32, ka boholo bo khothaletsoang ba kabo ea 4096.
Reserved module interface	Mojule oa Wi-Fi: hokela sethaleng sa leru ho ntlafatsa u le hole; Mojule oa USB: khoasolla lifaele ka USB Flash disk
Sebopeho sa PGT05	Ha sehlahisoa se senyeha ka kotsi, u ka sebelisa PGT05 ho ntlafatsa kernel ea DGUS le ho etsa hore sehlahisoa se khutlele ho se tloaelehileng.

Hlahisa Parameters

Mofuta oa LCD	IPS, TFT LCD
Sheba Angle	Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85° (L/R/U/D)
Qeto	480×800 pixels (0°/90°/180°/270°)
Mmala	24-bit 8R8G8B
Sebaka se sebetsang (AA)	51.4mm (W)×86.0mm (H)
Backlight Mode	LED
Bophelo ba Tšebeletso ea Backlight	> Lihora tse 20000 (Nako ea khanya e senyehang ho isa ho 50% maemong a ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng)
Khanya	DMG80480C040_03WTC: 400nit
	DMG80480C040_03WTR: 300nit
	DMG80480C040_03WN: 450nit
Taolo ea Khanya	0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena)
Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele.

Tšoara Parameters

Mofuta	CTP (Capacitive touch panel)
Sebopeho	Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng
Mokhoa oa ho ama	Tšehetso ea ntlha ea ho ama le ho hula
Bothata ba Sefahleho	6H
Khanya e fetisang	Ho feta 90%
Bophelo	Ho ama makhetlo a fetang 1,000,000

Mofuta	RTP (Resistive touch panel)
Sebopeho	Filimi ENA + khalase ENA
Mokhoa oa ho ama	Tšehetso ea ntlha ea ho ama le ho hula
Bothata ba Sefahleho	3H
Khanya e fetisang	Ho feta 80%
Bophelo	Ho ama makhetlo a fetang 1,000,000

Li-Parameters tsa Interface ea serial

Mokhoa	UART2: TTL/CMOS UART4: TTL/CMOS (E fumaneha feela ka mor'a tlhophiso ea OS)
Boemo ba Voltage	Boemo ba Teko	Min	Mofuta	Max	Yuniti
	Sephetho sa 1, Iout = -4mA	3.0	3.3	-	IN
	Sephetho 0, Iout = 4mA	-	0	0.3	IN
	Kenyelletso 1	2.4	3.3	5.0	IN
	Kenyeletso 0	0	-	0.5	IN
Baud Rate	3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps
Sebopeho sa data	UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS)
Cable ea Interface	10Pin_1.0mm

Litlhaloso tsa motlakase

Tikoloho ya tshebetso