4.0 Inch Serial Port Screen
DMG48480T040_01W (Kereiti ea Indasteri)

Tlhaloso

DWIN 480*RGB*480, UART LCD Mojule

Likaroloana:

● E itšetlehile ka T5L0, mebala ea 262K, 480 × 480 pixels IPS, IPS TFT LCD Display;

● Ha ho na ho ama / Resistive touch / Capacitive touch ke boikhethelo;

● Tšehetsa TTL/RS232;

● Bophelo ba Backlight:>30000 lihora (Nako ea khanya e senyeha ho isa ho 50% boemong ba ho tsoela pele ho sebetsa ka khanya e phahameng)

● Ho bonolo ho sebelisa DWIN DGUS V7.6 GUIs Development, ha ho na litsebo tsa ho ngola tse hlokahalang;

● Mokhoa oa Ntšetso-pele ea Bobeli: DGUS II / TA (Seteishene sa litaelo);

● Wide View angle: 85/85/85/85(L/R/U/D).

Re romelle lengolo-tsoibila Leqephe la lintlha Lintlha tsa 3D

Rated Power

Voltage e sebetsang

6 ~ 36V, boleng bo tloaelehileng ba 12V

Ts'ebetso ea Hona Joale

VCC=12V, lebone le phahameng la morao

VCC=12V, lebone la morao le tima

Matla a khothalletsoang: 12V 1A DC

Video

Hardware le tlhaloso ea sebopeho

Khokahano ea LCM	FPC50_0.5mm, sebopeho sa RGB
TP interface	Capacitive touch: FPC6_0.5mm, IIC interface
TP interface	Resissive touch: 4Pin_1.0mm segokanyimmediamentsi sa sebolokigolo
Sehokelo sa mosebelisi	8Pin_2.0mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s
Khanya	16 MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000
Buzzer	3V e etsang buzzer. Matla:
RTC	Super-capacitor bakeng sa phepelo ea motlakase. Ho nepahala: ±20ppm@25℃. E ka sebetsa ka mokhoa o tloaelehileng bakeng sa matsatsi a 7 ka mor'a ho tima matla
Khokahano ea karete ea SD	FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo. Sekhahla sa ho khoasolla: 4Mb/s
Sebopeho sa PGT05	Ha sehlahisoa se senyeha ka kotsi, u ka sebelisa PGT05 ho ntlafatsa kernel ea DGUS le ho etsa hore sehlahisoa se khutlele ho se tloaelehileng.

Hlahisa Parameters

Mofuta oa LCD	IPS, TFT LCD
Sheba Angle	Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85° (L/R/U/D)
Qeto	480×480 pixels (tšehetso 0°/90°/180°/270°)
Mmala	18-bit 6R6G6B
Sebaka se sebetsang (AA)	71.9mm (W)×70.2mm (H)
Backlight Mode	LED
Bophelo ba Tšebeletso ea Backlight	> Lihora tse 30000 (Nako ea khanya e senyehang ho isa ho 50% maemong a ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng)
Khanya	DMG48480T040_01WTC: 250nit
	DMG48480T040_01WTR: 250nit
	DMG48480T040_01WN: 300nit
Taolo ea Khanya	0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena)
Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele.

Tšoara Parameters

Mofuta	CTP (Capacitive touch panel)
Sebopeho	Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng
Mokhoa oa ho ama	Tšehetso ea ntlha ea ho ama le ho hula
Bothata ba Sefahleho	6H
Khanya e fetisang	Ho feta 90%
Bophelo	Ho ama makhetlo a fetang 1,000,000

Mofuta	RTP (Resistive touch panel)
Sebopeho	Filimi ENA + khalase ENA
Mokhoa oa ho ama	Tšehetso ea ntlha ea ho ama le ho hula
Bothata ba Sefahleho	3H
Khanya e fetisang	Ho feta 80%
Bophelo	Ho ama makhetlo a fetang 1,000,000

Li-Parameters tsa Interface ea serial

Mokhoa	UART2: ON=TTL/CMOS; TLHOKOMELISO=RS232 UART4: ON=TTL/CMOS; OFF=RS232(E fumaneha feela ka mor'a tlhophiso ea OS)
Boemo ba Voltage	Boemo ba Teko	Min	Mofuta	Max	Yuniti
	Sephetho sa 1, Iout = 1mA	3.0	3.3	-	IN
	Sephetho 0, Iout = -1mA	-	0	0.3	IN
	Kenyeletso 1, Iin = 1mA	2.4	3.3	5.0	IN
	Kenyelletso 0, Iin = -1mA	0	-	0.5	IN
Baud Rate	3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps
Sebopeho sa data	UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS)
Cable ea Interface	8Pin_2.0mm

Litlhaloso tsa motlakase

Tikoloho ya tshebetso