3 Inch Medical TFT Display DMG64360K030_01W (Mophato oa bongaka) Setšoantšo se hlahang

3 Inch Medical TFT Pontšo
DMG64360K030_01W (Mophato oa bongaka)

DWIN 360 * 640, Medical UART LCM

Likaroloana:

● Qeto e phahameng ea 360*640 Pixel, IPS e pharaletseng ea ho shebella angle 85°/85°/85°/85° (L/R/U/D)

● Ho feta lihora tse 30000 Bophelo ba Backlight

● Kereiti ea Bongaka, Ka Coating e Conformal;

● Ha ho na skrine ea ho ama / Resistive touch screen / Capacitive touch screen;

● TTL/RS232 Interface,10PIN 1.0mm FCC terata ea khokahanyo;

● Ka GUI & OS dual-core, GUI e nang le li-control tse ngata.

Re romelle lengolo-tsoibila Leqephe la lintlha Lintlha tsa 3D

Tlhaloso

Li-tag tsa Sehlahisoa

Video

Tlhaloso

Boitsebiso ba ASIC

T5L1 ASIC

E ntlafalitsoe ke DWIN. Tlhahiso e kholo ka selemo sa 2019,1MBytes Kapa Flash ho chip, 512KBytes e sebelisitsoeng ho boloka database ea basebelisi. Nako ea ho ngola hape: makhetlo a fetang 100,000

Pontšo

Mmala	16.7M (16777216) mebala
Mofuta oa LCD	IPS, TFT LCD
Sheba Angle	Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85° (L/R/U/D)
Sebaka sa Pontšo (AA)	65.28mm (W) × 36.72mm (H)
Qeto	360×640 pixels (tšehetso 0°/90°/180°/270°)
Backlight	LED
Khanya	DMG64360K030-01WN:300nit DMG64360K030-01WTC:250nit DMG64360K030-WTR:250nit

Voltage & ea Hona joale

Motlakase oa Matla	4.5 ~ 5.5V, boleng bo tloaelehileng ba 5V
Ts'ebetso ea Hona joale	VCC = +5V, Backlight on,300mA
Ts'ebetso ea Hona joale	VCC = +5V, Backlight tima, 140mA

Tšoara li-parameter

Mofuta	CTP (Capacitive touch panel)
Sebopeho	Sebopeho sa G+G se nang le sekoaelo sa bokaholimo sa khalase e futhumetseng ea Asahi
Mokhoa oa ho ama	Tšehetso ea ntlha ea ho ama le ho hula
Bothata ba Sefahleho	6H
Khanya e fetisang	Ho feta 90%
Bophelo	Ho ama makhetlo a fetang 1,000,000

Mofuta	RTP (Resistive touch panel)
Sebopeho	Filimi ENA + khalase ENA
Mokhoa oa ho ama	Tšehetso ea ntlha ea ho ama le ho hula
Bothata ba Sefahleho	3H
Khanya e fetisang	Ho feta 80%
Bophelo	Ho ama makhetlo a fetang 1,000,000

Teko ea ho Tšepahala

Mocheso oa Mosebetsi	-20 ℃ ~ 70 ℃
Mocheso oa polokelo	-30 ℃ ~ 80 ℃
Ho roala ka mokhoa o hlophisitsoeng	Ee
Mongobo o sebetsang	10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH

Sehokelo

Khokahano ea LCM	FPC40_0.5mm, sebopeho sa RGB
Baudrate	3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps
Voltage e hlahisoang	Sephetho sa 1, Iout=1mA , 3.0~3.3 V
Voltage e hlahisoang	Sephetho 0, Iout=-1mA, 0~0.3 V
Input Voltage (RXD)	Kenyeletso 1, Iin = 1mA, 2.4~-5.0 V
	Kenyelletso 0, Iin = -1mA,0~0.5 V
Mosebelisi	UART2:ON=TTL/CMOS; OFF=RS232(TTL/CMOS ea kamehla) UART4:ON=TTL/CMOS; OFF=RS232(E fumaneha feela ka mor'a tlhophiso ea OS) 10Pin_1.0mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s
RTC	Super-capacitor bakeng sa phepelo ea motlakase. Ho nepahala: ±20ppm@25℃. E ka sebetsa ka mokhoa o tloaelehileng bakeng sa matsatsi a 7 ka mor'a ho tima matla
Khanya	16MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000
Buzzer	3V e etsang buzzer. Matla:
Sehokelo sa SD	FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo. Sekhahla sa ho khoasolla: 4Mb/s
Sebopeho sa PGT05	Ha sehlahisoa se senyeha ka tsietsi, u ka sebelisa PGT05 ho ntlafatsa DGUS kernel le ho etsa hore sehlahisoa se khutlele setloaeling