Tlhaloso
| T5L2 ASIC*3 | DWIN e ntlafalitsoe ka boikemelo, tlhahiso ea bongata ka 2019; thekenoloji ea patented encryption e netefatsa ts'ireletso ea khoutu le data; tšebeliso e tlase ea matla, bokhoni bo matla ba ho thibela ho kena-kenana, ho feta liteko tsa EMC/EMI habonolo ka moralo oa mahlakore a mabeli a PCB. |
| Sehokelo sa mosebelisi | 8Pin_2.0mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s |
| Khanya | 32MBytes (2*16MBytes NOR Flash), e ka sebelisoa ho boloka lifaele tsa UI tsa mosebelisi joalo ka lifonti, litšoantšo, mmino, joalo-joalo, ka li-cycle tsa ho hlakola/ho ngola>100,000 linako |
| Eketsa liphahlo tsa Flash | Ho na le libaka tse peli tsa katoloso, tse tšehetsang katoloso ea NOR Flash le NAND Flash. Katoloso e phahameng ea NOR Flash e fihla ho 64Mbytes. Ha o kopanya NOR Flash le NAND Flash, katoloso e phahameng e fihla ho 48Mbytes (ho sebelisa li-slots tse peli tsa katoloso) + 512Mbytes (Ka har'a thebe) |
| Buzzer | 3V e etsang buzzer |
| Sebuela-hole | 2Pin_2.0mm sokete, sebopeho sa sebui |
| RTC | Super-capacitor e fana ka matla ho RTC, ho nepahala: ± 20ppm @25 ℃. E ka boloka ts'ebetso e tloaelehileng matsatsi a 7 kamora ho tima. Reserved konopo selefouno phepelo e tsamaellanang potoloho. |
| Setšoantšo sa karete ea SD | E ts'ehetsa ho khoasolla lifaele tsohle (lifaele tsa UI tsa mosebelisi, lifaele tsa CFG, firmware ea kernel), e bonts'a lipalo-palo tsa khoaso skrineng, sekhahla sa khoaso: 4 Mb/s. Ha u khoasolla lifaele, karete ea SD e hloka ho hlophisoa ka sebopeho sa FAT32, ka boholo bo khothaletsoang ba kabo ea 4096. |
| Reserved module interface | E tšehetsa soldering ea WI-FI module le USB download module. Mohlala oa module oa WI-FI: WI-FI-10; Mefuta ea module ea USB: HDL702, HDL703 |
| Sebopeho sa PGT05 | E sebelisetsoa ho hlophisa bocha firmware ea DGUS |
| Mofuta oa LCD | IPS e sebetsa skrineng sa TFT LCD |
| Viewing Angle | Ponahalo e pharalletseng (litheko tse tloaelehileng ke 85°/85°/85°/85°), phapang e phahameng, le tlhahiso e ntle ea mebala. |
| Qeto | 1920×1080 dipikselse (0°/90°/180°/270°) |
| Mmala | 24-bit 8R8G8B |
| Sebaka se sebetsang (AA) | 476.1mm (W)×267.9mm (H) |
| Backlight Mode | LED |
| Bophelo ba Tšebeletso ea Backlight | > Lihora tse 20000 (Nako ea khanya e senyehang ho isa ho 50% maemong a ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
| Khanya | 150n |
| Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
| Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. | |
| Mofuta | CTP (Capacitive touch panel) |
| Sebopeho | Sebopeho sa G+FF se nang le sekoahelo sa bokaholimo ba khalase e futhumetseng |
| Mokhoa oa ho ama | Tšehetso ea ntlha ea ho ama le ho hula |
| Bothata ba Sefahleho | 6H |
| Khanya e fetisang | >90% |
| Bophelo | Ho ama makhetlo a fetang 1,000,000 |
| Mokhoa | UART2: ON=TTL/CMOS; TLHOKOMELISO=RS232 | |||||
| Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
| Sephetho sa 1, Iout = -4mA | 4.78 | 5.0 | - | IN | ||
| Sephetho 0, Iout = 4mA | - | - | 0.4 | IN | ||
| Kenyelletso 1 | 2.5 | 5.0 | - | IN | ||
| Kenyelletso 0 | - | - | 1.0 | IN | ||
| Baud Rate | 3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps | |||||
| Sebopeho sa data |
UART2: N81 | |||||
| Cable ea Interface | 8Pin_2.0mm | |||||
| Rated Power | 20.4W | |||||
| Voltage e sebetsang | 15 ~ 36V, boleng bo tloaelehileng ba 24V | |||||
| Ts'ebetso ea Hona Joale | 850mA | VCC=24V, mabone a phahameng a morao | ||||
| 225mA | VCC=24V, lebone la morao le tima | |||||
| Matla a khothaletsoang: 24V 1A DC | ||||||
| Mocheso oa ho sebetsa | 0℃~50℃ (24V @ 60% RH) | |||||
| Mocheso oa polokelo | -20 ℃ ~ 60 ℃ | |||||
| Conformal Coating | Ha ho letho | |||||
| Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH | |||||
