Tlhaloso
![International seteishene PCB thempleite-2.8](https://ecdn6.globalso.com/upload/p/1355/source/2024-06/665f08385a99a94507.jpg)
![10pin lisebelisoa](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f9649adc6ab21136.jpg)
Khokahano ea LCM | FPC40_0.5mm, sebopeho sa RGB |
Sehokelo sa mosebelisi | 10Pin_1.0mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s |
Khanya | 16 MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
Eketsa Flash | E ka atolosoa ho 64Mbytes NOR Flash kapa 48 Mbytes NORFlash+512 Mbytes NAND Flash.Ha o atolosa Flash, likarolo tse kang li-decoder le capacitor li hloka ho rekisoa. Ka kopo ikopanye le morekisi ea tsamaisanang le eena bakeng sa ho itlhophisa |
Buzzer | 3V e etsang buzzer. Matla: |
Khokahano ea karete ea SD | FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo. Sekhahla sa ho khoasolla: 4Mb/s |
Sebopeho sa PGT05 | Ha sehlahisoa se senyeha ka kotsi, u ka sebelisa PGT05 ho ntlafatsa kernel ea DGUS le ho etsa hore sehlahisoa se khutlele ho se tloaelehileng. |
Mofuta oa LCD | IPS, TFT LCD |
Viewing Angle | Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85° (L/R/U/D) |
Qeto | 480×480 pixels (tšehetso 0°/90°/180°/270°) |
Mmala | 24-bit 8R8G8B |
Sebaka se sebetsang (AA) | D=70.1mm |
Backlight Mode | LED |
Bophelo ba Tšebeletso ea Backlight | > Lihora tse 20000 (Nako ea khanya e senyehang ho isa ho 50% maemong a ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
Khanya | DMG48480C028_03WTC: 300nit |
Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. |
Mofuta | CTP (Capacitive touch panel) |
Sebopeho | Sebopeho sa G+FF se nang le sekoahelo sa bokaholimo ba khalase e futhumetseng |
Mokhoa oa ho ama | Thepa e le 'ngoe le ts'ehetso e tsoelang pele ea ho thella |
Bothata ba Sefahleho | 6H |
Khanya e fetisang | Ho feta 90% |
Bophelo | Ho ama makhetlo a fetang 1,000,000 |
Mokhoa |
UART2: ON=TTL/CMOS; TLHOKOMELISO=RS232 UART4: ON=TTL/CMOS; OFF=RS232(E fumaneha feela ka mor'a tlhophiso ea OS) | |||||
Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
Sephetho sa 1, Iout = -4mA | 2.7 | 3.2 | - | IN | ||
Sephetho 0, Iout = 4mA | - | 0.1 | 0.4 | IN | ||
Kenyelletso 1 | 2.4 | 3.3 | 5.5 | IN | ||
Kenyeletso 0 | 0 | - | 1.0 | IN | ||
Baud Rate | 3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps | |||||
Sebopeho sa data |
UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS) | |||||
Cable ea Interface | 10Pin_1.0mm |
Rated Power | ||||||
Voltage e sebetsang | 4.5 ~ 5.5V, boleng bo tloaelehileng ba 5V | |||||
Ts'ebetso ea Hona Joale | 140mA | VCC=5V, lebone le phahameng la morao | ||||
70mA | VCC=5V, lebone la morao le tima | |||||
Matla a khothalletsoang: 5V 0.2A DC |
Mocheso oa ho sebetsa | -20℃~70℃ (5V @ 60% RH) | |||||
Mocheso oa polokelo | -30 ℃ ~ 80 ℃ | |||||
Conformal Coating | Ha ho letho | |||||
Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH |