Tlhaloso
![](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f966bfebe8b37484.png)
![assesory](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f965c5439ec37951.jpg)
Khokahano ea LCM | FPC60_0.5mm, sebopeho sa LVDS |
TP interface | Capacitive touch: sebopeho sa COB, sebopeho sa IIC |
Resissive touch: 4Pin_1.0mm segokanyimmediamentsi sa sebolokigolo | |
Sehokelo sa mosebelisi | 8Pin_2.0mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s |
RS485 sebopeho | 2Pin_ 2.0mm sokete e tshekaletseng: Bakeng sa puisano ea RS485 |
Khanya | 16 MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
Eketsa Flash | E ka hola ho fihla ho 64Mbytes NOR Flash kapa 48Mbytes NOR Flash+512Mbytes NAND Flash |
Buzzer | 3V e etsang buzzer. Matla: |
RTC | Super-capacitor bakeng sa phepelo ea motlakase. Ho nepahala: ±20ppm@25℃. E ka sebetsa ka mokhoa o tloaelehileng bakeng sa matsatsi a 7 ka mor'a ho tima matla |
Khokahano ea karete ea SD | FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo. Sekhahla sa ho khoasolla: 4Mb/s |
Reserved module interface |
Mojule oa Wi-Fi: hokela sethaleng sa leru ho ntlafatsa u le hole; Mojule oa USB: khoasolla lifaele ka USB Flash disk |
Sebopeho sa PGT05 | Ha sehlahisoa se senyeha ka kotsi, u ka sebelisa PGT05 ho ntlafatsa kernel ea DGUS le ho etsa hore sehlahisoa se khutlele ho se tloaelehileng. |
Mofuta oa LCD | IPS, TFT LCD |
Viewing Angle | Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85° (L/R/U/D) |
Qeto | 1024×768 pixels (tšehetso 0°/90°/180°/270°) |
Mmala | 24-bit 8R8G8B |
Sebaka se sebetsang (AA) | 211.20mm (W)×158.40mm (H) |
Backlight Mode | LED |
Bophelo ba Tšebeletso ea Backlight | > Lihora tse 30000 (Nako ea khanya e senyehang ho isa ho 50% maemong a ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
Khanya | DMG10768K104_03WTC: 250nit |
DMG10768K104_03WTR: 250nit | |
DMG10768K104_03WN: 300nit | |
Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho phatsima' me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. |
Mofuta | CTP (Capacitive touch panel) |
Sebopeho | Sebopeho sa G+G se nang le sekoaelo sa bokaholimo ba khalase e futhumetseng |
Mokhoa oa ho ama | Tšehetso ea ntlha ea ho ama le ho hula |
Bothata ba Sefahleho | 6H |
Khanya e fetisang | Ho feta 90% |
Bophelo | Ho ama makhetlo a fetang 1,000,000 |
Mofuta | RTP (Resistive touch panel) |
Sebopeho | Filimi ENA + khalase ENA |
Mokhoa oa ho ama | Tšehetso ea ntlha ea ho ama le ho hula |
Bothata ba Sefahleho | 3H |
Khanya e fetisang | Ho feta 80% |
Bophelo | Ho ama makhetlo a fetang 1,000,000 |
Mokhoa |
UART2: RS232 UART4: RS232 (E fumaneha feela ka mor'a tlhophiso ea OS) UART5: RS485 (E fumaneha feela ka mor'a tlhophiso ea OS) | |||||
UART2,4 Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
Sephetho 1 | - | -5.0 | -3.0 | IN | ||
Sephetho 0 | 3.0 | 5.0 | - | IN | ||
Kenyelletso 1 | -15.0 | -5.0 | - | IN | ||
Kenyelletso 0 | - | 5.0 | 15.0 | IN | ||
UART2,4 Baud Rate | 3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps | |||||
UART5 Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
Sephetho 1 | 2.5 | 5.0 | - | IN | ||
Sephetho 0 | - | -5.0 | -2,5 | IN | ||
Kenyelletso 1 | 0 | 2.5 | - | IN | ||
Kenyelletso 0 | - | -2,5 | -0.2 | IN | ||
UART5 Baud Rate | 3150 ~ 921600bps, boleng bo tloaelehileng ba 115200bps | |||||
Sebopeho sa data |
UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS) UART5: N81/E81/O81/N82 , mekhoa e 4 (setlhophiso sa OS) | |||||
Cable ea Interface |
8Pin_2.0mm (RS232) 2Pin_2.0mm (RS485) |
Rated Power | ||||||
Voltage e sebetsang | 7 ~ 30V, boleng bo tloaelehileng ba 12V | |||||
Ts'ebetso ea Hona Joale | 460mA | VCC=12V, lebone le phahameng la morao | ||||
150mA | VCC=12V, lebone la morao le tima | |||||
Matla a khothalletsoang: 12V 1A DC |
Mocheso oa ho sebetsa | -20℃~70℃ (12V @ 60% RH) | |||||
Mocheso oa polokelo | -30 ℃ ~ 80 ℃ | |||||
Conformal Coating | Ee | |||||
Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH | |||||
Teko ea Botsofali | Lihora tse 72 mocheso o phahameng o qosoa botsofali ho 50 ℃ |
DMG10768K121_03W(Mophato oa bongaka)