Tlhaloso
![International seteishene PCB thempleite](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f969c7c58a519295.jpg)
![1](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f9676a5b64133602.jpg)
T5L2 ASIC | E ntlafalitsoe ke DWIN. Tlhahiso e kholo ka 2019,1MBytes Kapa Flash ho chip, 512KBytes e sebelisitsoeng ho boloka database ea basebelisi. Nako ea ho ngola bocha: e felile100,000 makhetlo |
Khokahano ea LCM | FPC50_0.5mm, sebopeho sa RGB |
Sehokelo sa RTP | Resistive touch panel: 4Pin_1.0mm segokanyimmediamentsi sa sebolokigolo |
Sehokelo sa mosebelisi | 8Pin_3.81mm sokete bakeng sa phepelo ea motlakase le likhokahano tsa serial. Sekhahla (boleng bo tloaelehileng): 12KByte/s |
Khanya | 16MBytes NOR Flash, bakeng sa fonte, litšoantšo le lifaele tsa molumo. Nako ea ho ngola hape: makhetlo a fetang 100,000 |
Eketsa Flash | E ka hola ho fihla ho 64Mbytes NOR Flash kapa 48Mbytes NOR Flash+512Mbytes NAND Flash |
Buzzer | 3V e etsang buzzer. Matla: |
RTC | Konopo cell bakeng sa phepelo ea motlakase. Ho nepahala: ±20ppm @25℃ |
Khokahano ea karete ea SD | FAT32. Khoasolla lifaele ka sebopeho sa SD li ka bonts'oa lipalo-palo |
Reserved module interface |
Mojule oa Wi-Fi: hokela sethaleng sa leru ho ntlafatsa u le hole Mojule oa USB: khoasolla lifaele ka USB Flash disk |
Sebopeho sa PGT05 | Ha sehlahisoa se senyeha ka kotsi, u ka sebelisa PGT05 ho ntlafatsa kernel ea DGUS le ho etsa hore sehlahisoa se khutlele ho se tloaelehileng. |
Mofuta oa LCD | IPS, TFT LCD |
Viewing Angle | Tsela e pharaletseng ea ho shebella, 85°/85°/85°/85°(L/R/U/D) |
Qeto | 1024×600 pixels (tšehetso 0°/90°/180°/270°) |
Mmala | 24-bit 8R8G8B |
Sebaka se sebetsang (AA) | 223.2mm (W)×125.8mm (H) |
Backlight Mode | LED |
Bophelo ba Tšebeletso ea Backlight | > Lihora tsa 20000 (Nako ea khanya e senyehang ho 50% boemong ba ho sebetsa ka mokhoa o tsoelang pele ka khanya e phahameng) |
Khanya | DMG10600C101_15WTR: 250nit |
Taolo ea Khanya | 0 ~ 100 grade (Ha khanya e fetotsoe ho 1% ~ 30% ea khanya e phahameng ka ho fetisisa, ho ka 'na ha e-ba le ho thothomela 'me ha ho khothalletsoe ho sebelisoa sebakeng sena) |
Tlhokomeliso: U ka sebelisa li-wallpaper tsa "screen saver" tse matla ho qoba litlamorao tse bakiloeng ke leqephe le tsitsitseng nako e telele. |
Mofuta | RTP (Resistive touch panel) |
Sebopeho | Filimi ENA + khalase ENA |
Mokhoa oa ho ama | Tšehetso ea ntlha ea ho ama le ho hula |
Bothata ba Sefahleho | 3H |
Khanya e fetisang | Ho feta 80% |
Bophelo | Ho ama makhetlo a fetang 1,000,000 |
Mokhoa |
UART2: RS232 UART4: RS485 (E fumaneha feela ka mor'a tlhophiso ea OS) | |||||
UART2 Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
Sephetho 1 | - | -5.0 | -3.0 | IN | ||
Sephetho 0 | 3.0 | 5.0 | - | IN | ||
Kenyelletso 1 | -15.0 | -5.0 | - | IN | ||
Kenyelletso 0 | - | 5.0 | 15.0 | IN | ||
UART2 Baud Rate | 3150 ~ 3225600bps, boleng bo tloaelehileng ba 115200bps | |||||
UART4 Boemo ba Voltage | Boemo ba Teko | Min | Mofuta | Max | Yuniti | |
Sephetho 1 | 2.5 | 5.0 | - | IN | ||
Sephetho 0 | - | -5.0 | -2,5 | IN | ||
Kenyelletso 1 | 0 | 2.5 | - | IN | ||
Kenyelletso 0 | - | -2,5 | -0.2 | IN | ||
UART4 Baud Rate | 3150 ~ 921600bps, boleng bo tloaelehileng ba 115200bps | |||||
Sebopeho sa data |
UART2: N81 UART4: N81/E81/O81/N82 , mekhoa e 4 (O Sconfiguration) | |||||
Cable ea Interface | 8Pin_3.81mm Sokete |
Rated Power | ||||||
Voltage e sebetsang | 6 ~ 36V, boleng bo tloaelehileng ba 12V | |||||
Ts'ebetso ea Hona Joale | 350mA | VCC=12V, lebone le phahameng la morao | ||||
120mA | VCC=12V, lebone la morao le tima | |||||
Matla a khothalletsoang: 12V 1A DC |
Mocheso oa ho sebetsa | -20℃~70℃ (12V @ 60% RH) | |||||
Mocheso oa polokelo | -30 ℃ ~ 80 ℃ | |||||
Mongobo o sebetsang | 10% ~ 90%RH, boleng bo tloaelehileng ba 60% RH | |||||
Conformal Coating | Ha ho letho |