Tsanangudzo
| T5L0-Q88 ASIC | Yakagadzirwa neDWIN. Kugadzirwa kweMisa muna 2023,1MBytes Kana Flash pane chip, 512KBytes yakashandiswa kuchengetedza dhatabhesi remushandisi. Nyorazve kutenderera: pamusoro100,000 nguva |
| LCM interface | FPC31_0.5mm, 3SPI+16RGB interface |
| Mushandisi interface | 6Pin_2.0mm socket yemagetsi uye serial kutaurirana. Yero yekudhawunirodha(yakajairika kukosha): 12KByte/s |
| USB interface | MICRO USB, magetsi ekushandisa interface (5V) |
| Flash | 16 MBytes NOR Flash, yemafonti, mapikicha uye mafaira ekuteerera. Nyorazve kutenderera: pamusoro pe100,000 nguva |
| SD kadhi interface | FPC8_0.5mm interface, isina SD kadhi slots, yekunze adapter board inodiwa pakurodha. FAT32, Dhawunirodha mafaera ne SD interface inogona kuratidzwa muhuwandu. Kurodha mutengo: 4Mb/s |
| PGT05 interface | Kana chigadzirwa chaparara netsaona, unogona kushandisa PGT05 kugadzirisa DGUS kernel uye kuita kuti chigadzirwa chidzokere kune chakajairika. |
| LCD Type | IPS, TFT LCD |
| Viewing Angle | Wide viewing angle, 85°/85°/85°/85° (L/R/U/D) |
| Resolution | 480×480 pixels (0°/90°/180°/270°) |
| Color | 18-bit 6R6G6B |
| Active Area (AA) | Diameter=53.28mm |
| View Area (VA) | Diameter=53.88mm |
| Backlight Mode | LED |
| Backlight Service Hupenyu | >20000 maawa (Nguva yekupenya inoora kusvika 50% pamamiriro ekuenderera mberi kushanda nekupenya kwakanyanya) |
| Kupenya | 350nit |
| Kudzora Kujeka | 0 ~ 100 giredhi (Kana kupenya kwakagadziridzwa kusvika 1% ~ 30% yekupenya kwakanyanya, kupenya kunogona kuitika uye hakukurudzirwe kushandiswa mumhando iyi) |
| Ongorora: Unogona kushandisa ane simba skrini saver mapikicha kuti udzivise mitsetse yakakonzerwa neyakagadziriswa peji kuratidzwa kwenguva yakareba. | |
| Type | CTP (Capacitive touch panel) |
| Chimiro | G + FF chimiro chine chivharo chepamusoro chegirazi rinopisa |
| Bata Modhi | Kubata kamwe chete, tsigira kuenderera mberi kutsvedza kubata |
| Pamusoro Kuoma | 6H |
| Light Transmittance | Kupfuura 90% |
| Hupenyu | Kupfuura 1,000,000 nguva kubata |
| Bata torque | Chete yakakodzera CC, midziyo.: 300±100gf.cm |
| Nhamba uye Nzvimbo yevakavharirwa | Inokodzera chete CC, zvishandiso.: 24 detents (Nhanho kona: 15 ° ± 3 °) |
| Hupenyu hwekutenderera | Iyo shaft ye encoder ichatenderedzwa kusvika 30,000 cycles nekumhanya kwe600 ~ 1000 / h pasina magetsi emagetsi, mushure mezvo kuyerwa kuchaitwa. |
| Chinja dunhu uye Nhamba ye pulse | danda rimwechete uye kukanda kamwe chete (sundira pa) |
| Kufamba kwekuchinja | 1.7±0.5mm |
| Simba rekushanda | 6±3N (610±306gf) |
| Mode |
UART2: TTL/CMOS; | |||||
| Voltage Level | Test Condition | Min | Type | Max | Unit | |
| Kubuda 1, Iout = -4mA | 3.0 | 3.3 | - | IN | ||
| Kubuda 0, Iout = 4mA | - | 0 | 0.3 | IN | ||
| Input 1 | 2.4 | 3.3 | 5.0 | IN | ||
| Input 0 | 0 | - | 0.5 | IN | ||
| Baud Rate | 3150 ~ 3225600bps, kukosha kwakajairika kwe115200bps | |||||
| Data Format | N81 | |||||
| Interface Cable | 6Pin_2.0mm | |||||
| Rated Power | ||||||
| Kushanda Voltage | 4.5 ~ 5.5V, chaiyo kukosha kwe5V | |||||
| Operating Current | 155mA | VCC=5V, max backlight | ||||
| 70mA | VCC=5V, backlight yadzimwa | |||||
| Inokurudzirwa simba rekupa: 5V 0.5A DC | ||||||
| Operating Temperature | -20℃~70℃ (5V @ 60% RH) | |||||
| Storage Temperature | -30 ℃ ~ 80 ℃ | |||||
| Conformal Coating | Hapana | |||||
| Kushanda Humidity | 10% ~ 90% RH, kukosha kwakajairika kwe60% RH | |||||
