Kufotokozera
| Mawonekedwe a ogwiritsa ntchito | 8Pin_2.0mm socket yopangira magetsi ndi kulumikizana kosalekeza. Mtengo wotsitsa(mtengo wake): 12KByte/s |
| Kung'anima | 16 MBytes NOR Flash, yamafonti, zithunzi ndi mafayilo amawu. Kuzunguliranso: nthawi zopitilira 100,000 |
| Wonjezerani mapepala a Flash | Malo atatu okulitsa akupezeka, kuthandizira kukulitsa kwa NOR Flash ndi NAND Flash. Kukula kwakukulu kwa NOR Flash ndikufikira 64Mbytes. Pogwirizanitsa NOR Flash ndi NAND Flash, kuwonjezereka kwakukulu kumafika ku 48Mbytes (pogwiritsa ntchito mipata iwiri yowonjezera) + 512Mbytes. Pamene mukukulitsa Flash, zigawo monga decoders ndi capacitors ziyenera kugulitsidwa. Chonde funsani wogulitsa wofananirayo kuti musinthe mwamakonda (Zomwe zili mkati mwa chivundikiro chotchinga) |
| Buzzer | 3V passive buzzer |
| Mtengo wa RTC | Super-capacitor imapereka mphamvu ku RTC, kulondola: ± 20ppm @25 ℃. Itha kukhalabe yogwira ntchito kwa masiku 7 mutazimitsa. Reserved batani cell mphamvu yoyendera yoyendera. |
| SD khadi slot | Imathandizira kutsitsa mafayilo onse (mafayilo a UI ogwiritsa ntchito, mafayilo a CFG, kernel firmware), imawonetsa ziwerengero zotsitsa pazenera, kutsitsa: 4 Mb/s. Mukatsitsa mafayilo, khadi la SD liyenera kusinthidwa kukhala FAT32, ndi gawo lovomerezeka la 4096. |
| Ma module osungidwa | Imathandizira kugulitsa gawo la WI-FI ndi gawo lotsitsa la USB. WI-FI module chitsanzo: WI-FI-10; Mitundu ya module ya USB: HDL702, HDL703 |
| Chithunzi cha PGT05 | Amagwiritsidwa ntchito pokonzanso maziko a firmware a DGUS |
| Mtundu wa LCD | TN ndondomeko TFT LCD chophimba |
| Kuwona Angle | Ngodya yowonera mwachizolowezi, 70°/70°/50°/70° (L/R/U/D) |
| Kusamvana | 800 × 600 mapikiselo (kuthandizira 0°/90°/180°/270°) |
| Mtundu | Mtundu wa 16.7M (24-bit 8R8G8B) |
| Active Area (AA) | 162.00mm (W) × 121.50mm (H) |
| Chiyankhulo | RGB |
| Backlight Mode | LED |
| Backlight Service Life | > Maola a 30000 (Nthawi yowala ikuwola mpaka 50% pakugwira ntchito mosalekeza ndikuwala kwambiri) |
| Kuwala | DMG80600T080_02WTC: 300nit |
| DMG80600T080_02WTR: 250nit | |
| DMG80600T080_02WN: 350nit | |
| Kuwongolera Kuwala | 0 ~ 100 giredi (Pamene kuwala kusinthidwa kukhala 1% ~ 30% ya kuwala kwakukulu, kuthwanima kumatha kuchitika ndipo sikuvomerezeka kuti mugwiritse ntchito pamtunduwu) |
| Zindikirani: Mutha kugwiritsa ntchito zithunzi zosinthira pazenera kuti mupewe zotsatiridwa ndi masamba osasinthika kwa nthawi yayitali. | |
| Mtundu | CTP (Capacitive touch panel) |
| Chiyankhulo | I²C |
| Kapangidwe | Kukhudza kwa mfundo imodzi ndikuthandizira kukhudza kosalekeza |
| Touch Mode | Support mfundo kukhudza ndi kuukoka |
| Kuuma Pamwamba | 6H |
| Kuwala Kutumiza | > 85% |
| Moyo | Kupitilira nthawi 1,000,000 kukhudza |
| Mtundu | RTP (Resistive touch panel) |
| Kapangidwe | filimu IYI + galasi IYI |
| Touch Mode | Kukhudza kwa mfundo imodzi ndikuthandizira kukhudza kosalekeza |
| Kuuma Pamwamba | 3H |
| Kuwala Kutumiza | > 80% |
| Moyo | Kupitilira nthawi 1,000,000 kukhudza |
| Mode |
UART2: ON = TTL/CMOS; KUCHOKERA=RS232 UART4: ON = TTL/CMOS; OFF=RS232(Ikupezeka kokha mukasinthitsa OS) | |||||
| Voltage Level | Mayeso | Min | Mtundu | Max | Chigawo | |
| Kutulutsa 1, Iout = -4mA | 4.78 | 5.0 | - | MU | ||
| Kutulutsa 0, Iout = 4mA | - | - | 0.4 | MU | ||
| Kulowetsa 1 | 2.5 | 5.0 | - | MU | ||
| Kulowetsa 0 | - | - | 1.0 | MU | ||
| Mtengo wa Baud | 3150 ~ 3225600bps, mtengo wamba wa 115200bps | |||||
| Mtundu wa Data |
UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS kasinthidwe) | |||||
| Chingwe cha Interface | 8Pin_2.0mm | |||||
| Adavoteledwa Mphamvu | ||||||
| Opaleshoni ya Voltage | 6 ~ 36V, mtengo wamba wa 12V | |||||
| Ntchito Panopa | 280-320mA | VCC = 12V, kuwala kwapambuyo kwambiri | ||||
| 100mA | VCC = 12V, nyali yakumbuyo yazimitsidwa | |||||
| Mphamvu zovomerezeka: 12V 1A DC | ||||||
| Kutentha kwa Ntchito | -20 ℃ ~ 70 ℃ (12V @ 60% RH) | |||||
| Kutentha Kosungirako | -30 ℃ ~ 80 ℃ | |||||
| Conformal Coating | Inde | |||||
| Chinyezi chogwira ntchito | 10% ~ 90% RH, mtengo wamba wa 60% RH | |||||
