Specification
| Color | 262K colorum |
| LCD Type | IPS-TFT-LCD, |
| Viewing Anglus | Lata visendi angelum, valorem typicum 85°/85°/85°/85°(L/R/U/D) |
| Active Area（ AA） | 95.04mm (W) 53.86mm (H) |
| Resolution | 480×272 |
| Backlight | LED |
| splendor | DMG48270F043_02WN:300nit |
| DMG48270F043_02WTR: 250nit | |
| DMG48270F043_02WTC: 250nit | |
| DMG48270F043_02WTCZ01:250nit | |
| DMG48270F043_02WTCZ02:50nit |
| Potentia Voltage | 3.6~5.5V, valor typicus 5V |
| Operatio Current | VCC=5V, max backlight, 220mA |
| VCC=5V, backlight off, 100mA |
| User interface | 50Pin_0.5mm FPC |
| Baud rate | 3150~3225600bps |
| Output intentione | Output 1; 3.0~3.3 V |
| Output 0; 0~0.3 V | |
| Input intentione RXD | Input 1; 3.3V |
| Input 0; 0~0.5V | |
| Interface | UART2: TTL; |
| UART4: TTL, （ Tantum available post OS configuratione | |
| UART5: TTL, （ tantum available post OS configuratione | |
| Data Forma | UART2: N81; |
| UART4: N81/E81/O81/N82;4 modi (OS configuration) | |
| UART5: N81/E81/O81/N82;4 modi (OS configuration) |
| Pin | Definition | I/O* | Eget Description |
| 1 | +5V | ego | Virtutis copia, DC3.6-5.5V |
| 2 | +5V | ego | |
| 3 | GND | GND | GND |
| 4 | GND | GND | |
| 5 | GND | GND | |
| 6 | AD7 | ego | 5 input ADCs. 12-bit resolutio in casu 3.3V potestatis copia. 0-3.3V input intentione. Exceptis AD6, reliqua notitia ad Core OS per UART3 mittitur tempore reali cum 16KHz sampling rate. AD1 & AD5 parallelis adhiberi possunt, & adhiberi possunt AD3 & AD7 parallelis, quae sunt duobus 32KHz sampling AD. AD1, AD3, AD5, AD7 in parallelis adhiberi possunt, quae aequantur ipsi 64KHz sampling AD; notitia summatur 1024 temporibus et deinde divisa per 64 ut obtineat 64Hz 16bit AD valorem per oversampling. |
| 7 | AD6 | ego | |
| 8 | AD5 | ego | |
| 9 | AD3 | ego | |
| 10 | AD2 | ego | |
| 11 | +3.3 | O* | 3.3V output, maximum pondus 150mA. |
| 12 | SPK | O* | EXTERNUS MOSFET ad stridorem vel oratorem repellere. Resistor externus 10K in terram detrahi debet ut potestas in |
| 13 | SD_CD | I/O* | SD/SDHC interfacies, SD_CK capacitorem 22pF cum GND prope SD card interface coniungit. |
| 14 | SD_CK | O* | |
| 15 | SD_D3 | I/O* | |
| 16 | SD_D2 | I/O* | |
| 17 | SD_D1 | I/O* | |
| 18 | SD_D0 | I/O* | |
| 19 | PWM0 | O* | II 16 bis PWM output. Resistor externus 10K ad terram detrahi debet ut potestas in gradu inferiori sit. Core OS in tempore reali per UART3 regi potest |
| 20 | PWM1 | O* | |
| viginti unum | P3.3 | I/O* | Si utens RX8130 vel SD2058 I2C RTC ad utrumque IOs, SCL coniungi debet P3.2, & SDA cum P3.3 in parallelis connecti cum 10K resistenti viverra usque ad 3.3V. |
| vigintiduo | P3.2 | I/O* | |
| viginti tres | P3.1/EX1 | I/O* | Adhiberi potest ut externum 1 input simul interrumpat, et sustinet utrumque planum intentione humili vel ore trahens modos interrumpendos. |
| XXIV | P3.0/EX0 | I/O* | Adhiberi potest ut externum 0 input simul interrumpat, et sustinet utrumque planum voltage, vel ore trahens modos interrumpendos. |
| 25 | P2.7 | I/O* | IO interface |
| 26 | P2.6 | I/O* | IO interface |
| 27 | P2.5 | I/O* | IO interface |
| 28 | P2.4 | I/O* | IO interface |
| 29 | P2.3 | I/O* | IO interface |
| 30 | P2.2 | I/O* | IO interface |
| 31 | P2.1 | I/O* | IO interface |
| 32 | P2.0 | I/O* | IO interface |
| 33 | P1.7 | I/O* | IO interface |
| 34 | P1.6 | I/O* | IO interface |
| 35 | P1.5 | I/O* | IO interface |
| 36 | P1.4 | I/O* | IO interface |
| 37 | P1.3 | I/O* | IO interface |
| 38 | P1.2 | I/O* | IO interface |
| 39 | P1.1 | I/O* | IO interface |
| 40 | P1.0 | I/O* | IO interface |
| 41 | UART4_TXD | O* | UART4 |
| 42 | UART4_RXD | ego | |
| 43 | UART5_TXD | O* | UART5 |
| 44 | UART5_RXD | ego | |
| 45 | P0.0 | I/O* | IO interface |
| 46 | P0.1 | I/O* | IO interface |
| 47 | CAN_TX | O* | Can interface |
| 48 | CAN_RX | ego | |
| 49 | UART2_TXD | O* | UART2 (UART0 Vide portum OS core) |
| 50 | UART2_RXD | ego |
