Spesifikasi
![PCB](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f9646b65a1548470.jpg)
T5L1 ASIC | T5L1 ASIC minangka GUI kanthi daya rendah, biaya-efektif, lan aplikasi ASIC dual-inti chip tunggal sing terintegrasi sing dirancang dening DWIN Technology kanggo LCD ukuran cilik lan diproduksi massal ing 2019. |
warna | 16.7M werna | ||
Tipe LCD | TN, TFT LCD | ||
Sudut Pandang | Malaikat nonton TV, nilai khas 70°/70°/40°/30°(L/R/U/D) | ||
Area Tampilan (AA) | 162.0mm (W) × 121.5mm (H) | ||
Resolusi | 800*600 | ||
Lampu mburi | LED | ||
padhang |
DMG80600F080_01WTC: 250nit DMG80600F080_01WTCZ01:250nit DMG80600F080_01WTR: 200nit DMG80600F080_01WN: 300nit |
Tegangan Daya | 4.5 ~ 5.5V | ||
Operasi Saiki | 580mA VCC=5V, maks | ||
160mA VCC=5V, lampu latar mati |
Suhu Kerja | -10 ℃ ~ 60 ℃ | ||
Suhu panyimpenan | -20 ℃ ~ 70 ℃ | ||
Kelembapan Kerja | 10% ~ 90% RH, nilai khas 60% RH |
antarmuka panganggo | 50Pin_0.5mm FPC | ||
Baud Rate | 3150~3225600bps | ||
Tegangan Output (TXD) | Output 1;3.0~3.3 V | ||
Output 0;0~0.3 V | |||
Tegangan Input (RXD) | Input 1; 3.3V | ||
Input 0; 0 ~ 0.5V | |||
Antarmuka |
UART2: TTL; UART4: TTL; (Mung kasedhiya sawise konfigurasi OS UART5: TTL; (Mung kasedhiya sawise konfigurasi OS) | ||
Format Data |
UART2: N81; UART4: N81/E81/O81/N82; 4 mode (konfigurasi OS) UART5: N81/E81/O81/N82; 4 mode (konfigurasi OS) |
Pin | definisi | Aku/O | Deskripsi Fungsional |
1 | 5V | aku | Sumber daya, DC4.5-5.5V |
2 | 5V | aku | |
3 | GND | GND | GND |
4 | GND | GND | |
5 | GND | GND | |
6 | AD7 | aku | 5 input ADC. Resolusi 12-bit ing kasus catu daya 3.3V. voltase input 0-3.3V. Kajaba kanggo AD6, data liyane dikirim menyang inti OS liwat UART3 ing wektu nyata kanthi tingkat sampling 16KHz. AD1 lan AD5 bisa digunakake ing podo karo, lan AD3 lan AD7 bisa digunakake ing podo karo, kang padha karo loro 32KHz sampling AD. AD1, AD3, AD5, AD7 bisa digunakake kanthi podo karo, sing padha karo AD sampling 64KHz; data wis jumlah 1024 kaping lan banjur dibagi 64 diwenehi nilai AD 64Hz 16bit dening oversampling. |
7 | AD6 | aku | |
8 | AD5 | aku | |
9 | AD3 | aku | |
10 | AD1 | aku | |
11 | +3.3 | O | Output 3.3V, beban maksimal 150mA. |
12 | SPK | O | MOSFET njaba kanggo drive buzzer utawa speaker. Resistor 10K eksternal kudu ditarik mudhun menyang lemah kanggo mesthekake yen daya-on kurang. |
13 | SD_CD | Aku/O | Antarmuka SD / SDHC, SD_CK nyambungake kapasitor 22pF menyang GND cedhak antarmuka kertu SD. |
14 | SD_CK | O | |
15 | SD_D3 | Aku/O | |
16 | SD_D2 | Aku/O | |
17 | SD_D1 | Aku/O | |
18 | SD_D0 | Aku/O | |
19 | PWM0 | O |
2 16-bit PWM output. Resistor 10K eksternal kudu ditarik mudhun menyang lemah kanggo mesthekake yen daya-on kurang. Inti OS bisa dikontrol ing wektu nyata liwat UART3 |
20 | PWM1 | O | |
rong puluh siji | P3.3 | Aku/O | Yen nggunakake RX8130 utawa SD2058 I2C RTC kanggo nyambung menyang loro IOs, SCL kudu disambungake menyang P3.2, lan SDA disambungake menyang P3.3 ing podo karo karo 10K resistor narik-nganti 3.3V. |
rong puluh loro | P3.2 | Aku/O | |
telulikur | P3.1/EX1 | Aku/O | Bisa digunakake minangka interrupt external 1 input bebarengan, lan ndhukung loro tingkat voltase kurang utawa trailing mode interupsi pinggiran. |
patlikur | P3.0/EX0 | Aku/O | Bisa digunakake minangka input interrupt 0 eksternal bebarengan, lan ndhukung mode interupsi tingkat voltase sithik utawa trailing edge. |
25 | P2.7 | Aku/O | antarmuka IO |
26 | P2.6 | Aku/O | antarmuka IO |
27 | P2.5 | Aku/O | antarmuka IO |
28 | P2.4 | Aku/O | antarmuka IO |
29 | P2.3 | Aku/O | antarmuka IO |
30 | P2.2 | Aku/O | antarmuka IO |
31 | P2.1 | Aku/O | antarmuka IO |
32 | P2.0 | Aku/O | antarmuka IO |
33 | P1.7 | Aku/O | antarmuka IO |
34 | P1.6 | Aku/O | antarmuka IO |
35 | P1.5 | Aku/O | antarmuka IO |
36 | P1.4 | Aku/O | antarmuka IO |
37 | P1.3 | Aku/O | antarmuka IO |
38 | P1.2 | Aku/O | antarmuka IO |
39 | P1.1 | Aku/O | antarmuka IO |
40 | P1.0 | Aku/O | antarmuka IO |
41 | UART4_TXD | O | UART4 |
42 | UART4_RXD | aku | |
43 | UART5_TXD | O | UART5 |
44 | UART5_RXD | aku | |
45 | P0.0 | Aku/O | antarmuka IO |
46 | P0.1 | Aku/O | antarmuka IO |
47 | CAN_TX | O | antarmuka CAN |
48 | BISA_RX | aku | |
49 | UART2_TXD | O | UART2 (UART2 serial port saka OS inti) |
50 | UART2_RXD | aku |