Spesifikasi
![Cithakan PCB stasiun internasional](https://ecdn6.globalso.com/upload/p/1355/source/2024-06/665f096b386bb25206.jpg)
![aksesoris 10 pin](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f963432988e52316.jpg)
antarmuka panganggo | 10Pin_1.0mm latching soket kanggo sumber daya lan komunikasi serial. Tingkat download (nilai khas): 12KByte/s |
lampu kilat | 16 MBytes NOR Flash, kanggo fonts, gambar lan file audio. Siklus nulis ulang: luwih saka 100.000 kaping |
Expand Flash pads | Telung slot expansion kasedhiya, ndhukung expansion saka NOR Flash lan NAND Flash. Ekspansi maksimal kanggo NOR Flash nganti 64Mbytes. Nalika nggabungake NOR Flash lan NAND Flash, ekspansi maksimal nganti 48Mbytes (nggunakake rong slot ekspansi) + 512Mbytes. |
Buzzer | 3V pasif buzzer |
slot kertu SD | Ndhukung ndownload kabeh file (file UI pangguna, file CFG, firmware kernel dhasar), nampilake statistik download ing layar, tingkat download: 4 Mb/s. Nalika ndownload file, kertu SD kudu diformat ing format FAT32, kanthi ukuran unit alokasi sing disaranake 4096. |
Antarmuka modul Reserved | Ndhukung soldering modul WI-FI lan modul download USB. Model modul WI-FI: WI-FI-10; Model modul USB: HDL702, HDL703 |
antarmuka PGT05 | Digunakake kanggo reprogramming perangkat kukuh DGUS ndasari |
Tipe LCD | TN proses layar TFT LCD |
Sudut Pandang | Sudut pandang normal, 70°/70°/50°/70° (L/R/U/D) |
Resolusi | 800×480 piksel (0°/90°/180°/270°) |
warna | 16.7M warna (24-bit 8R8G8B) |
Area Aktif (AA) | 108.0mm (W) × 64.8mm (H) |
Antarmuka | RGB |
Mode Lampu Latar | LED |
Urip Layanan Lampu Latar | > 20000 jam (Wektu padhange rusak nganti 50% ing kondisi kerja terus-terusan kanthi padhange maksimal) |
padhang | DMG80480C050_03WTC: 250nit |
DMG80480C050_03WTR: 250nit | |
DMG80480C050_03WN: 300nit | |
Kontrol padhang | 0 ~ 100 kelas (Yen padhange disetel kanggo 1% ~ 30% saka padhange maksimum, kelip-kelip bisa kedadeyan lan ora dianjurake kanggo nggunakake ing sawetara iki) |
Cathetan: Sampeyan bisa nggunakake wallpaper screen saver dinamis kanggo ngindhari gambar sawise sing disebabake tampilan kaca tetep suwe. |
Jinis | CTP (panel tutul kapasitif) |
Antarmuka | I²C |
Struktur | Struktur G+G kanthi tutup lumahing kaca tempered |
Mode Tutul | Tutul titik tunggal lan ndhukung sentuhan geser terus |
Kekerasan lumahing | 6H |
Transmitansi cahya | > 90% |
urip | Swara 1,000,000 kaping tutul |
Jinis | RTP (Resistive Touch Panel) |
Struktur | Film iki + kaca iki |
Mode Tutul | Tutul titik tunggal lan ndhukung sentuhan geser terus |
Kekerasan lumahing | 3H |
Transmitansi cahya | > 80% |
urip | Swara 1,000,000 kaping tutul |
Mode |
UART2: ON = TTL/CMOS; OFF=RS232 UART4: ON = TTL/CMOS; OFF = RS232 (Mung kasedhiya sawise konfigurasi OS) | |||||
Tingkat Tegangan | Kondisi Test | Min | Jinis | Maks | Unit | |
Output 1, Iout = -4mA | 2.7 | 3.2 | - | ING | ||
Output 0, Iout = 4mA | - | 0.1 | 0.4 | ING | ||
Input 1 | 2.4 | 3.3 | 5.5 | ING | ||
Input 0 | - | - | 1.0 | ING | ||
Baud Rate | 3150~3225600bps, nilai khas 115200bps | |||||
Format data |
UART2: N81 UART4: N81/E81/O81/N82, 4 mode (konfigurasi OS) | |||||
Kabel Antarmuka Kab | 10 Pin_1.0mm |
Daya Rated | ||||||
Tegangan operasi | 4.5 ~ 5.5V, nilai khas 5V | |||||
Operasi Saiki | 240mA | VCC=5V, maks | ||||
70mA | VCC=5V, lampu latar mati | |||||
Sumber daya sing disaranake: 5V 1A DC |
Suhu operasi | -20 ℃ ~ 70 ℃ (5V @ 60% RH) | |||||
Suhu panyimpenan | -30 ℃ ~ 80 ℃ | |||||
Coating Konformal | ora ana | |||||
Kelembapan Operasi | 10% ~ 90% RH, nilai khas 60% RH |