Nkọwapụta
| T5L2 ASIC*3 | DWIN mepụtara onwe ya, mmepụta oke na 2019; teknụzụ ezoro ezo nke patented na-eme ka koodu na nchekwa data; oriri ike dị ala, ike mgbochi nnyonye anya siri ike, na-agafe ule EMC/EMI na ngwa PCB nwere akụkụ abụọ. |
| interface onye ọrụ | Oghere 8Pin_2.0mm maka ọkọnọ ike na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s |
| Flash | 32MBytes (2*16MBytes NOR Flash), enwere ike iji chekwaa faịlụ UI onye ọrụ dị ka mkpụrụedemede, onyonyo, egwu, wdg, na-ehichapụ / dee okirikiri> ugboro 100,000. |
| Gbasaa paịlị Flash | Oghere mgbasawanye abụọ dị, na-akwado mgbasawanye nke NOR Flash na NAND Flash. Mgbasa kachasị maka NOR Flash ruru 64Mbytes. Mgbe ị na-ejikọta NOR Flash na NAND Flash, mgbasawanye kachasị ruru 48Mbytes (iji oghere mgbasawanye abụọ) + 512Mbytes (N'ime ọta) |
| Buzzer | 3V pasive buzzer |
| Ọkà okwu interface | 2Pin_2.0mm oghere, ọkà okwu interface |
| RTC | Super-capacitor na-enye RTC ike, izi ezi: ± 20ppm @25 ℃. Nwere ike ịnọgide na-arụ ọrụ nkịtị maka ụbọchị 7 ka agbanyụrụ ọkụ. sekit dakọtara na bọtịnụ cell echekwabara. |
| Oghere kaadị SD | Na-akwado nbudata faịlụ niile (faịlụ UI onye ọrụ, faịlụ CFG, kernel firmware), na-egosiputa ọnụ ọgụgụ nbudata na ihuenyo, ọnụego nbudata: 4 Mb/s. Mgbe ị na-ebudata faịlụ, ekwesịrị ịhazi kaadị SD n'ụdị FAT32, yana nha nha nke 4096 akwadoro. |
| Edobere modul interface | Na-akwado soldering nke WI-FI modul na USB download modul. Ụdị modul WI-FI: WI-FI-10; Ụdị modul USB: HDL702, HDL703 |
| PGT05 interface | Ejiri ya maka ịmegharị ngwa ngwa DGUS dị n'okpuru |
| Ụdị LCD | IPS usoro TFT LCD ihuenyo |
| Nkiri akụkụ | Ogologo nlele n'akuku (ụkpụrụ a na-ahụkarị bụ 85°/85°/85°/85°), ọdịiche dị elu, na mmeputakwa agba dị mma. |
| Mkpebi | 1920×1080 pikselụ (0°/90°/180°/270°) |
| Agba | Agba 262K (18-bit 6R6G6B) |
| Mpaghara nọ n'ọrụ (AA) | 293.76mm (W) × 165.24mm (H) |
| Interface | eDP |
| Ụdị ọkụ azụ | Ikanam |
| Ndụ ọrụ ọkụ azụ | > 10000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị) |
| Icha ọkụ | 250nit |
| Njikwa ihie | 0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a) |
| Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge. | |
| Ụdị | Ogwe mmetụ ike (CTP) |
| Interface | I²C |
| Nhazi | Nhazi G+FF nwere mkpuchi elu nke iko ọkụ |
| Ụdị mmetụ | Otu ihe emetụ aka na nkwado mmetụ na-aga n'ihu |
| Isi ike | 6H |
| Mbufe ọkụ | > 90% |
| Ndụ | Ihe karịrị 1,000,000 ugboro metụ aka |
| Ụdị | UART2: ON=TTL/CMOS; Gbanyụọ=RS232 | |||||
| Ọkwa voltaji | Ọnọdụ ule | Min | Ụdị | Oke | Nkeji | |
| Mpụta 1, Iout = -4mA | 4.78 | 5.0 | - | N'ime | ||
| Mpụta 0, Iout = 4mA | - | - | 0.4 | N'ime | ||
| Ntinye 1 | 2.5 | 5.0 | - | N'ime | ||
| Ntinye 0 | - | - | 1.0 | N'ime | ||
| Ọnụego Baud | 3150 ~ 3225600bps, uru nke 115200bps | |||||
| Usoro data |
UART2: N81 | |||||
| USB Interface | 8Pin_2.0mm | |||||
| Enyere ike | ||||||
| Voltaji na-arụ ọrụ | 12 ~ 36V, ahụkarị uru nke 12V | |||||
| Na-arụ ọrụ ugbu a | 510mA | VCC=12V, nnukwu ọkụ azụ | ||||
| 130mA | VCC=12V, gbanyụọ ọkụ azụ | |||||
| Ọkụ ọkụ akwadoro: 12V 1A DC | ||||||
| Okpomọkụ na-arụ ọrụ | 0 ℃ ~ 50 ℃ (12V @ 60% RH) | |||||
| Okpomọkụ nchekwa | -20 ℃ ~ 60 ℃ | |||||
| Mkpuchi conformal | Ọ dịghị | |||||
| Iru mmiri na-arụ ọrụ | 10% ~ 90% RH, uru nke 60% RH | |||||
DMG48270S043_03W(Obi siri ike)
