8 inch nwere ọgụgụ isi LCD Module DMG80600T080_02W(Ọkwa ụlọ ọrụ)

Nkọwapụta

Nkọwa

Mkpado ngwaahịa

Nkọwapụta

Module LCD nwere ọgụgụ isi 8 inch DMG80600T080_02W (Ọkwa ụlọ ọrụ) egosipụtara

DWIN 800*RGB*600,TN TFT ihuenyo LCD

Atụmatụ:

● Dabere na T5L ASIC nke onwe ya, 16.7M Agba, 24bit, 800 * 600 Pixel;

● Enweghị ihuenyo mmetụ aka / ihuenyo mmetụ na-eguzogide / Capacitive touchscreen;

● Oghere Usoro Port: TTL ma ọ bụ RS232 Interface ,8Pin_2.0mm ;

● nbudata faịlụ n'okpuru kaadị SD ma ọ bụ ọdụ ụgbọ mmiri UART 2 n'ịntanetị;

● Ọrụ GUI dabeere na ngwá ọrụ DGUS V7.6, ọ dịghị nkà nzuzo achọrọ;

● Na-agba ọsọ kpochapụwo usoro DGUS II

● TN-TFT-LCD, Nkịtị ele anya: 70 ° / 70 ° / 50 ° / 70 ° (L / R / U / D);

● DWIN OS kernel ghere oghe nye onye ọrụ maka mmepe nke abụọ, site na asụsụ DWIN OS ma ọ bụ KEIL C51.

Zitere anyị email Akwụkwọ data 3D data

Vidiyo

Enyere ike

Voltaji na-arụ ọrụ

6 ~ 36V, uru nke 12V

Na-arụ ọrụ ugbu a

VCC=12V, nnukwu ọkụ azụ

VCC=12V, gbanyụọ ọkụ azụ

Ọkụ ọkụ akwadoro: 12V 1A DC

Nkọwa ngwaike na interface

interface onye ọrụ	Oghere 8Pin_2.0mm maka ọkọnọ ike na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s
Flash	16 MBytes MA Ọ BỤ Flash, maka mkpụrụedemede, foto na faịlụ ọdịyo. Mgbanwe okirikiri: ihe karịrị 100,000 ugboro
Gbasaa paịlị Flash	Oghere mgbasawanye atọ dị, na-akwado mgbasawanye nke NOR Flash na NAND Flash. Mgbasa kachasị maka NOR Flash ruru 64Mbytes. Mgbe ị na-ejikọta NOR Flash na NAND Flash, mmụba kachasị elu ruo 48Mbytes (iji oghere mgbasawanye abụọ) + 512Mbytes. Mgbe ị na-agbasa Flash, ihe ndị dị ka decoders na capacitors kwesịrị ka a na-eresị ya. Biko kpọtụrụ onye na-ere ahịa kwekọrọ maka nhazi dị mkpa (Ọ dị n'ime mkpuchi mkpuchi)
Buzzer	3V pasive buzzer
RTC	Super-capacitor na-enye RTC ike, izi ezi: ± 20ppm @25 ℃. Nwere ike ịnọgide na-arụ ọrụ nkịtị maka ụbọchị 7 ka agbanyụrụ ọkụ. sekit dakọtara na bọtịnụ cell echekwabara.
Oghere kaadị SD	Na-akwado nbudata faịlụ niile (faịlụ UI onye ọrụ, faịlụ CFG, kernel firmware), na-egosiputa ọnụ ọgụgụ nbudata na ihuenyo, ọnụego nbudata: 4 Mb/s. Mgbe ị na-ebudata faịlụ, ekwesịrị ịhazi kaadị SD n'ụdị FAT32, yana nha nha nke 4096 akwadoro.
Edobere modul interface	Na-akwado soldering nke WI-FI modul na USB download modul. Ụdị modul WI-FI: WI-FI-10; Ụdị modul USB: HDL702, HDL703
PGT05 interface	Ejiri ya maka ịmegharị ngwa ngwa DGUS dị n'okpuru

Ngosipụta oke

Ụdị LCD	TN usoro TFT LCD ihuenyo
Nkiri akụkụ	Nkiri nlele nkịtị, 70°/70°/50°/70° (L/R/U/D)
Mkpebi	800×600 pikselụ (nkwado 0°/90°/180°/270°)
Agba	Agba 16.7M (24-bit 8R8G8B)
Mpaghara nọ n'ọrụ (AA)	162.00mm (W) × 121.50mm (H)
Interface	RGB
Ụdị ọkụ azụ	Ikanam
Ndụ ọrụ ọkụ azụ	> 30000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị)
Icha ọkụ	DMG80600T080_02WTC: 300nit
	DMG80600T080_02WTR: 250nit
	DMG80600T080_02WN: 350nit
Njikwa ihie	0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a)
Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge.

Metụ Parameters

Ụdị	Ogwe mmetụ ike (CTP)
Interface	I²C
Nhazi	Otu ihe emetụ aka na nkwado aka na-aga n'ihu
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	6H
Mbufe ọkụ	>85%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Ụdị	RTP (Panel mmetụ mmegide)
Nhazi	Ihe nkiri a + iko a
Ụdị mmetụ	Otu ihe emetụ aka na nkwado aka na-aga n'ihu
Isi ike	3H
Mbufe ọkụ	>80%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Oghere Usoro Interface Parameters

Ụdị	UART2: ON=TTL/CMOS; Gbanyụọ=RS232 UART4: NA=TTL/CMOS; Gbanyụọ=RS232(Ọ dị naanị mgbe nhazi OS gasịrị)
Ọkwa voltaji	Ọnọdụ ule	Min	Ụdị	Oke	Nkeji
	Mpụta 1, Iout = -4mA	4.78	5.0	-	N'ime
	Mpụta 0, Iout = 4mA	-	-	0.4	N'ime
	Ntinye 1	2.5	5.0	-	N'ime
	Ntinye 0	-	-	1.0	N'ime
Ọnụego Baud	3150 ~ 3225600bps, uru nke 115200bps
Usoro data	UART2: N81 UART4: N81/E81/O81/N82, 4 ụdịdị (nhazi OS)
USB Interface	8Pin_2.0mm

Nkọwapụta ọkụ eletrik

gburugburu ebe ọrụ