Nkọwapụta
Mkpado ngwaahịa
Nlereanya
| DT322X220034Z240201D | Enweghị mmetụ |
| DT322X220034Z240201E | Mmetụ aka |
| DT322X220034Z240201F | Mmetụ mmegide |
Nkọwa ngwaike na interface
| LCM interface | FPC50_0.5mm, RGB interface |
| TP interface | Mmetụ aka ike: usoro COB, interface IIC |
| Mmetụ mmegide: 4Pin_1.0mm interface |
| interface onye ọrụ | Oghere 8Pin_2.54mm maka ọkọnọ ike na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s |
| Flash | 16 MBytes MA Ọ BỤ Flash, maka mkpụrụedemede, foto na faịlụ ọdịyo. Mgbanwe okirikiri: ihe karịrị 100,000 ugboro |
| Buzzer | 3V pasive buzzer. Ike: |
| Ọkà okwu interface | 2pin_ 2.0mm kehoraizin interface |
| RTC | Super-capacitor maka ọkọnọ ike. Nke ziri ezi: ± 20ppm@25℃. Ọ nwere ike ịrụ ọrụ nke ọma maka ụbọchị 7 mgbe ike dara |
| Njikọ kaadị SD 1 | FAT32. Enwere ike igosipụta faịlụ site na interface SD na ọnụ ọgụgụ. Ọnụego nbudata: 4Mb/s |
| Kaadị SD interface 2 | Kwado ichekwa data onyonyo igwefoto |
| Ngwọta interface | 4Pin_ 2.54mm interface, anaghị emeghe maka ojiji |
| USB interface | Oghere USB kwụ ọtọ, Eji maka ọkụ femụwe |
| Igwefoto interface | 2pin_ 2.0mm kehoraizin interface (na-akwado ijikọ otu 1080P ma ọ bụ abụọ 720 ese foto, na mgbe ejikọrọ ọwa abụọ, igwefoto s ga-abụ nke otu ụdị. ngụkọta nnyefe frame ọnụego: 24 okpokolo agba kwa sekọnd) |
| PGT05 interface | Mgbe ngwaahịa dakwasịrị na mberede, ị nwere ike iji PGT05 imelite kernel DGUS wee mee ka ngwaahịa ahụ laghachi na nkịtị. |
Ngosipụta oke
| Ụdị LCD | IPS, TFT LCD |
| Nkiri akụkụ | Akụkụ nlele sara mbara, 85°/85°/85°/85°(L/R/U/D) |
| Mkpebi | 1024×600 pikselụ (nkwado 0°/90°/180°/270°) |
| Agba | 24-bit 8R8G8B |
| Mpaghara nọ n'ọrụ (AA) | 154.21mm (W) × 85.92mm (H) |
| Ụdị ọkụ azụ | Ikanam |
| Ndụ ọrụ ọkụ azụ | > 20000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị) |
| Icha ọkụ | DT322X220034Z240201D: 300nit |
| DT322X220034Z240201E: 250nit |
| DT322X220034Z240201F: 200nit |
| Njikwa ihie | 0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a) |
| Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge. |
Metụ Parameters
| Ụdị | Ogwe mmetụ ike (CTP) |
| Nhazi | Ọdịdị G+G nwere mkpuchi elu nke iko dị ọkụ |
| Ụdị mmetụ | Ebe nkwado aka na dọrọ |
| Isi ike | 6H |
| Mbufe ọkụ | Karịrị 85% |
| Ndụ | > 20000 awa |
|
|
| Ụdị | RTP (Panel mmetụ mmegide) |
| Nhazi | Ihe nkiri a + iko a |
| Ụdị mmetụ | Ebe nkwado aka na dọrọ |
| Isi ike | 3H |
| Mbufe ọkụ | 78%±3% |
| Ndụ | Ihe karịrị 1,000,000 ugboro metụ aka |
Oghere Usoro Interface Parameters
| Ụdị |
UART2: ON=TTL/CMOS; Gbanyụọ=RS232(RS232 emelitere)
UART4: NA=TTL/CMOS; Gbanyụọ=RS232(Ọ dị naanị mgbe nhazi OS gasịrị)
|
| Ọkwa voltaji | Ọnọdụ ule | Min | Ụdị | Oke | Nkeji |
| Mpụta 1, Iout = -4mA | 4.78 | 5.0 | - | N'ime |
| Mpụta 0, Iout = 4mA | - | - | 0.4 | N'ime |
| Ntinye 1 | 2.5 | 5.0 | - | N'ime |
| Ntinye 0 | - | - | 1.0 | N'ime |
| Ọnụego Baud | 3150 ~ 3225600bps, uru nke 115200bps |
| Usoro data |
UART2: N81
UART4: N81/E81/O81/N82, 4 ụdịdị (nhazi OS)
|
| USB Interface | 8Pin_2.54mm |
Nkọwapụta ọkụ eletrik
| Enyere ike | |
| Voltaji na-arụ ọrụ | 6 ~ 36V, uru nke 12V |
| Na-arụ ọrụ ugbu a | 380mA | VCC=12V, nnukwu ọkụ azụ |
| 140mA | VCC=12V, gbanyụọ ọkụ azụ |
| Ọkụ ọkụ akwadoro: 12V 1A DC |
gburugburu ebe ọrụ
| Okpomọkụ na-arụ ọrụ | -20 ℃ ~ 70 ℃ (12V @ 60% RH) |
| Okpomọkụ nchekwa | -30 ℃ ~ 80 ℃ |
| Mkpuchi conformal | Ee |
| Iru mmiri na-arụ ọrụ | 10% ~ 90% RH, uru nke 60% RH |
Nke gara aga: 4 inch IOT Touch Screen Wire-controler nwere Wifi (Nhọrọ) ụdị: TC040C17 U(W) 00
Osote: 10.1 inch 1024*600 HD Ihuenyo vidiyo igwefoto DT322X220034Z240201J/K/L
