4.3 inch Smart LCD Model: DMG80480C043_02W(Ọkwa azụmahịa)

DWIN 480xRGBx800, UART LCM

Atụmatụ

● Dabere na T5L1 ASIC nke onwe ya, 16.7M Agba, 24bit, 480 * 800 Pixel TFT LCD;

● Ọ dịghị ihuenyo mmetụ / ihuenyo mmetụ na-eguzogide / Capacitive touchscreen Nhọrọ;

● TTL Interface, 10Pin1.0mm FCC njikọ waya;

● Budata site na kaadị SD ma ọ bụ ọdụ ụgbọ mmiri dị n'ịntanetị;

● Ọ dị mfe iji DWIN DGUS V7.6 GUIs mmepe, ọ dịghị nkà nzuzo achọrọ;

● Sistemụ mmepe abụọ: DGUS II / TA (Ntuziaka setịpụrụ);

● IPS ele akụkụ: 85/85/85/85 (L / R / U / D);

Zitere anyị email Akwụkwọ data 3D data

Nkọwapụta

Vidiyo

Nkọwa ngwaike na interface

LCM interface	FPC40_0.5mm, RGB interface
TP interface	Mmetụ aka ike: usoro COB, interface IIC
TP interface	Mmetụ mmegide: 4Pin_1.0mm interface
interface onye ọrụ	10Pin_1.0mm oghere oghere maka ọkọnọ ọkụ na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s
Flash	16 MBytes MA Ọ BỤ Flash, maka mkpụrụedemede, foto na faịlụ ọdịyo. Mgbanwe okirikiri: ihe karịrị 100,000 ugboro
Gbasaa Flash	Enwere ike ịgbasa na 64Mbytes NOR Flash ma ọ bụ 48Mbytes NOR Flash+512Mbytes NAND Flash
Buzzer	3V pasive buzzer. Ike:
interface kaadị SD	FAT32. Enwere ike igosipụta faịlụ site na interface SD na ọnụ ọgụgụ. Ọnụego nbudata: 4Mb/s
Edobere modul interface	Wi-Fi modul: jikọọ na igwe ojii ikpo okwu ka imelite remote; Modul USB: budata faịlụ site na diski flash USB
PGT05 interface	Mgbe ngwaahịa dakwasịrị na mberede, ị nwere ike iji PGT05 imelite kernel DGUS wee mee ka ngwaahịa ahụ laghachi na nkịtị.

Ngosipụta oke

Ụdị LCD	IPS, TFT LCD
Nkiri akụkụ	Akụkụ nlele sara mbara, 85°/85°/85°/85°(L/R/U/D)
Mkpebi	480×800 pikselụ (nkwado 0°/90°/180°/270°)
Agba	24-bit 8R8G8B
Mpaghara nọ n'ọrụ (AA)	56.16mm (W) × 93.6mm (H)
Ụdị ọkụ azụ	Ikanam
Ndụ ọrụ ọkụ azụ	> 10000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị)
Icha ọkụ	DMG80480C043_02WTC: 250nit
	DMG80480C043_02WTR: 250nit
	DMG80480C043_02WN: 300nit
Njikwa ihie	0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a)
Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge.

Metụ Parameters

Ụdị	Ogwe mmetụ ike (CTP)
Nhazi	Ọdịdị G+G nwere mkpuchi elu nke iko dị ọkụ
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	6H
Mbufe ọkụ	Karịrị 90%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Ụdị	RTP (Panel mmetụ mmegide)
Nhazi	Ihe nkiri a + iko a
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	3H
Mbufe ọkụ	Karịrị 80%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Oghere Usoro Interface Parameters

Ụdị	UART2: TTL/CMOS UART4: TTL/CMOS (Ọ dị naanị mgbe nhazi OS gasịrị)
Ọkwa voltaji	Ọnọdụ ule	Min	Ụdị	Oke	Nkeji
	Mpụta 1, Iout = -4mA	3.0	3.3	-	N'ime
	Mpụta 0, Iout = 4mA	-	0	0.3	N'ime
	Ntinye 1	2.4	3.3	5.0	N'ime
	Ntinye 0	0	-	0.5	N'ime
Ọnụego Baud	3150 ~ 3225600bps, uru nke 115200bps
Usoro data	UART2: N81 UART4: N81/E81/O81/N82, 4 ụdịdị (nhazi OS)
USB Interface	10Pin_1.0mm

Nkọwapụta ọkụ eletrik

gburugburu ebe ọrụ