4.3 inch HMI UART LCM
DMG48270C043_03W (ọkwa azụmahịa)

Nkọwapụta

Nkọwa

Mkpado ngwaahịa

Nkọwapụta

DWIN 480*RGB*272,UART LCM

Atụmatụ:

● Dabere na T5L ASIC nke onwe ya, 16.7M Agba, 24bit, 480 * 272 pixel, TN TFT LCD;

● Enweghị ihuenyo mmetụ / ihuenyo mmetụ na-eguzogide / Capacitive touchscreen;

● TTL/CMOS; 10Pin_1.0mm oghere maka ike ọkọnọ na usoro nzikọrịta ozi;

● Ụdị nbudata ọtụtụ: site na kaadị SD ma ọ bụ ọdụ ụgbọ mmiri ntanetị;

● Sistemụ mmepe abụọ: DGUS II / TA (Ntuziaka setịpụrụ);

● TN View Angle: 70 ° / 70 ° / 50 ° / 70 ° (L / R / U / D);

● Na GUI & OS dual-core, GUI nwere njikwa bara ụba. DWIN OS kernel ghere oghe nye onye ọrụ maka mmepe nke abụọ, site na asụsụ DWIN OS ma ọ bụ KEIL C51.

Zitere anyị email Akwụkwọ data 3D data

Vidiyo

Enyere ike

Voltaji na-arụ ọrụ

4.5 ~ 5.5V, ahụkarị uru nke 5V

Na-arụ ọrụ ugbu a

VCC=5V, nnukwu ọkụ azụ

VCC=5V, gbanyụọ ọkụ azụ

Ọkụ ọkụ akwadoro: 5V 1A DC

Nkọwa ngwaike na interface

LCM interface	FPC40_0.5mm, RGB interface
TP interface	Mmetụ aka ike: usoro COB, interface IIC
TP interface	Mmetụ mmegide: 4Pin_1.0mm interface
interface onye ọrụ	Oghere 10Pin_1.0mm maka ọkọnọ ike na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s
Flash	16 MBytes MA Ọ BỤ Flash, maka mkpụrụedemede, foto na faịlụ ọdịyo. Mgbanwe okirikiri: ihe karịrị 100,000 ugboro
Buzzer	3V pasive buzzer. Ike:
interface kaadị SD	FAT32. Enwere ike igosipụta faịlụ site na interface SD na ọnụ ọgụgụ. Ọnụego nbudata: 4Mb/s
Edobere modul interface	Wi-Fi modul: jikọọ na igwe ojii ikpo okwu ka imelite remote; Modul USB: budata faịlụ site na diski flash USB
PGT05 interface	Mgbe ngwaahịa dakwasịrị na mberede, ị nwere ike iji PGT05 imelite kernel DGUS wee mee ka ngwaahịa ahụ laghachi na nkịtị.

Ngosipụta oke

Ụdị LCD	TN, TFT LCD
Nkiri akụkụ	Nkiri nlele nkịtị, 70°/70°/50°/70°(L/R/U/D)
Mkpebi	480×272 pikselụ (nkwado 0°/90°/180°/270°)
Agba	24-bit 8R8G8B
Mpaghara nọ n'ọrụ (AA)	95.00mm (W) × 53.90mm (H)
Ụdị ọkụ azụ	Ikanam
Ndụ ọrụ ọkụ azụ	> 20000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị)
Icha ọkụ	DMG48270C043_03WTC: 250nit
	DMG48270C043_03WTR: 250nit
	DMG48270C043_03WN: 300nit
Njikwa ihie	0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a)
Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge.

Oghere Usoro Interface Parameters

Ụdị	UART2: 3.3V & 5V TTL/CMOS UART4: 3.3V & 5V TTL/CMOS (Ọ dị naanị mgbe nhazi OS gasịrị)
Ọkwa voltaji	Ọnọdụ ule	Min	Ụdị	Oke	Nkeji
	Mpụta 1, Iout = 1mA	3.0	3.3	-	N'ime
	Mpụta 0, Iout = -1mA	-	0	0.3	N'ime
	Ntinye 1, Iin = 1mA	2.4	3.3	5.0	N'ime
	Ntinye 0, Iin = -1mA	0	-	0.5	N'ime
Ọnụego Baud	3150 ~ 3225600bps, uru nke 115200bps
Usoro data	UART2: N81 UART4: N81/E81/O81/N82, 4 ụdịdị (nhazi OS)
USB Interface	10Pin_1.0mm

Nkọwapụta ọkụ eletrik

gburugburu ebe ọrụ