4.0" Ụdị ihuenyo LCD:DMG80480T040_01W(ọkwa ụlọ ọrụ)

Atụmatụ:

● Dabere na T5L0, na-agba ọsọ DGUS II usoro, 18-bit, 480 × 800 pikselụ IPS, TFT LCD;

● Enweghị mmetụ aka / mmegide mmetụ / Ihuenyo mmetụ ike Nhọrọ;

● Jiri kaadị SD ma ọ bụ ọdụ ụgbọ mmiri dị n'ịntanetị budata ọrụ emechara;

● Enwere ike ịmepụta GUI site na DGUS V7.6 GUI, na-enweghị nkà nzuzo jụrụ;

● Sistemụ mmepe abụọ: DGUS II / TA (Ntuziaka setịpụrụ);

● IPS ele akụkụ: 85/85/85/85(L/R/U/D);

● Na GUI & OS dual-core, GUI nwere njikwa ọrụ. DWIN OS kernel ghere oghe maka mmepe nke abụọ, site na asụsụ DWIN OS ma ọ bụ KEIL C51.

Zitere anyị email Akwụkwọ data 3D data

Nkọwapụta

Vidiyo

Nkọwa ngwaike na interface

LCM interface	FPC40_0.5mm, RGB interface
TP interface	Mmetụ aka ike: FPC6_0.5mm, interface IIC
TP interface	Mmetụ mmegide: 4Pin_1.0mm interface
interface onye ọrụ	Oghere 8Pin_2.0mm maka ọkọnọ ike na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s
Flash	16 MBytes MA Ọ BỤ Flash, maka mkpụrụedemede, foto na faịlụ ọdịyo. Mgbanwe okirikiri: ihe karịrị 100,000 ugboro
Gbasaa Flash	Enwere ike ịgbasa na 64Mbytes NOR Flash ma ọ bụ 48Mbytes NOR Flash+512Mbytes NAND Flash
Buzzer	3V pasive buzzer. Ike:
RTC	Super-capacitor maka ọkọnọ ike. Nke ziri ezi: ± 20ppm@25℃. Ọ nwere ike ịrụ ọrụ nke ọma maka ụbọchị 7 mgbe ike dara
interface kaadị SD	FAT32. Enwere ike igosipụta faịlụ site na interface SD na ọnụ ọgụgụ. Ọnụego nbudata: 4Mb/s
PGT05 interface	Mgbe ngwaahịa dakwasịrị na mberede, ị nwere ike iji PGT05 imelite kernel DGUS wee mee ka ngwaahịa ahụ laghachi na nkịtị.

Ngosipụta oke

Ụdị LCD	IPS, TFT LCD
Nkiri akụkụ	Akụkụ nlele sara mbara, 85°/85°/85°/85°(L/R/U/D)
Mkpebi	480×800 pikselụ (nkwado 0°/90°/180°/270°)
Agba	18-bit 6R6G6B
Mpaghara nọ n'ọrụ (AA)	86.4mm (W) × 51.8mm (H)
Ụdị ọkụ azụ	Ikanam
Ndụ ọrụ ọkụ azụ	> 30000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị)
Icha ọkụ	DMG80480T040_01WTC: 350nit
	DMG80480T040_01WTR: 350nit
	DMG80480T040_01WN: 400nit
Njikwa ihie	0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a)
Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge.

Metụ Parameters

Ụdị	Ogwe mmetụ ike (CTP)
Nhazi	Ọdịdị G+G nwere mkpuchi elu nke iko dị ọkụ
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	6H
Mbufe ọkụ	Karịrị 90%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Ụdị	RTP (Panel mmetụ mmegide)
Nhazi	Ihe nkiri a + iko a
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	3H
Mbufe ọkụ	Karịrị 80%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Oghere Usoro Interface Parameters

Ụdị	UART2: ON=TTL/CMOS; Gbanyụọ=RS232 UART4: NA=TTL/CMOS; Gbanyụọ=RS232(Ọ dị naanị mgbe nhazi OS gasịrị)
Ọkwa voltaji	Ọnọdụ ule	Min	Ụdị	Oke	Nkeji
	Mpụta 1, Iout = 1mA	3.0	3.3	-	N'ime
	Mpụta 0, Iout = -1mA	-	0	0.3	N'ime
	Ntinye 1, Iin = 1mA	2.4	3.3	5.0	N'ime
	Ntinye 0, Iin = -1mA	0	-	0.5	N'ime
Ọnụego Baud	3150 ~ 3225600bps, uru nke 115200bps
Usoro data	UART2: N81 UART4: N81/E81/O81/N82, 4 ụdịdị (nhazi OS)
USB Interface	8Pin_2.0mm

Nkọwapụta ọkụ eletrik

gburugburu ebe ọrụ