4.0 inch HMI LCD Ngosipụta DMG48480C040_03W(ọkwa azụmahịa)

DWIN 480*RGB*480,UART LCM

Atụmatụ:

● 4.0-inch, 480*480 pikselụ mkpebi, 16.7M agba, IPS TFT LCD;

●LCM interface: FPC50_0.5mm, RGB interface;

● Enweghị mmetụ aka / mmegide mmetụ / mmetụ ike;

● Budata site na kaadị SD ma ọ bụ ọdụ ụgbọ mmiri dị n'ịntanetị, pikselụ 480 × 480;

● Ọ dị mfe iji DWIN DGUS V7.6 GUIs mmepe, ọ dịghị nkà nzuzo achọrọ;

● ITO film + ITO iko / G + G Ọdịdị na elu mkpuchi nke Asahi tempered iko;

● IPS View Angle: 85 ° / 85 ° / 85 ° / 85 ° (L / R / U / D);

● DWIN OS kernel ghere oghe nye onye ọrụ maka mmepe nke abụọ, site na asụsụ DWIN OS ma ọ bụ KEIL C51.

Zitere anyị email Akwụkwọ data 3D data

Nkọwapụta

Vidiyo

4.0inch LCD ngosi Module

Dabere na T5L1, na-agba sistemụ DGUS II

Nkọwa ngwaike na interface

LCM interface	FPC50_0.5mm, RGB interface
TP interface	Mmetụ aka ike: FPC6_0.5mm, interface IIC
TP interface	Mmetụ mmegide: FPC4_1.0mm
interface onye ọrụ	Oghere 10Pin_1.0mm maka ọkọnọ ike na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s
Flash	16 MBytes MA Ọ BỤ Flash, maka mkpụrụedemede, foto na faịlụ ọdịyo. Mgbanwe okirikiri: ihe karịrị 100,000 ugboro
Buzzer	3V pasive buzzer. Ike:
interface kaadị SD	FAT32. Enwere ike igosipụta faịlụ site na interface SD na ọnụ ọgụgụ. Ọnụego nbudata: 4Mb/s
Edobere modul interface	Modul Wi-Fi: jikọọ na igwe ojii ka imelite ngwa ngwa; modul USB: budata faịlụ site na diski flash USB
PGT05 interface	Mgbe ngwaahịa dakwasịrị na mberede, ị nwere ike iji PGT05 imelite kernel DGUS wee mee ka ngwaahịa ahụ laghachi na nkịtị.

Ngosipụta oke

Ụdị LCD	IPS, TFT LCD
Nkiri akụkụ	Akụkụ nlele sara mbara, 85°/85°/85°/85°(L/R/U/D)
Mkpebi	480×480 pikselụ (nkwado 0°/90°/180°/270°)
Agba	24-bit 8R8G8B
Mpaghara nọ n'ọrụ (AA)	71.90mm (W) × 70.20mm (H)
Ụdị ọkụ azụ	Ikanam
Ndụ ọrụ ọkụ azụ	> 20000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị)
Icha ọkụ	DMG48480C040_03WTC: 250nit
	DMG48480C040_03WTR: 250nit
	DMG48480C040_03WN: 300nit
Njikwa ihie	0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a)
Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge.

Metụ Parameters

Ụdị	Ogwe mmetụ ike (CTP)
Nhazi	Ọdịdị G+G nwere mkpuchi elu nke iko dị ọkụ
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	6H
Mbufe ọkụ	Karịrị 90%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Ụdị	RTP (Panel mmetụ mmegide)
Nhazi	Ihe nkiri a + iko a
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	3H
Mbufe ọkụ	Karịrị 80%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Oghere Usoro Interface Parameters

Ụdị	UART2: 3.3V & 5V TTL/CMOS UART4: 3.3V & 5V TTL/CMOS(Ọ dị naanị mgbe nhazi OS gasịrị)
Ọkwa voltaji	Ọnọdụ ule	Min	Ụdị	Oke	Nkeji
	Mpụta 1, Iout = 1mA	3.0	3.3	-	N'ime
	Mpụta 0, Iout = -1mA	-	0	0.3	N'ime
	Ntinye 1, Iin = 1mA	2.4	3.3	5.0	N'ime
	Ntinye 0, Iin = -1mA	0	-	0.5	N'ime
Ọnụego Baud	3150 ~ 3225600bps, uru nke 115200bps
Usoro data	UART2: N81 UART4: N81/E81/O81/N82, 4 ụdịdị (nhazi OS)
USB Interface	10Pin_1.0mm

Nkọwapụta ọkụ eletrik

gburugburu ebe ọrụ