2.1 inch okirikiri Smart LCD
DMG48480C021_03W (Ọkwa azụmahịa)

Nkọwapụta

Nkọwa

Mkpado ngwaahịa

Nkọwapụta

Atụmatụ:

●Dabere na T5L1, usoro DGUS II na-agba ọsọ, ọkwa azụmahịa;

● 2.1-inch okirikiri LCD, 480 * 480 pikselụ mkpebi;

● 16.7M agba, IPS-TFT-LCD, obosara ikiri akụkụ;

● 10Pin_1.0mm oghere maka ike ọkọnọ na usoro nkwurịta okwu;

● Ndụ ọrụ ọkụ azụ:> awa 20000 (Oge nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị)

● Jiri DWIN DGUS II V7.6GUIs mmepe software

Zitere anyị email Akwụkwọ data 3D data

Vidiyo

Enyere ike

Voltaji na-arụ ọrụ

4.5 ~ 5.5V, ahụkarị uru nke 5V

Na-arụ ọrụ ugbu a

VCC = +5V, ọkụ azụ agbanụrụ

VCC = +5V, gbanyụọ ọkụ azụ

Ọkụ ọkụ akwadoro: 5V 1A DC

ASIC

T5L1 ASIC

DWIN mebere ya. Mmepụta oke na 2019,1MBytes Ma ọ bụ Flash na mgbawa, 512KBytes eji echekwa nchekwa data onye ọrụ. Tinyegharịa okirikiri: gafere100,000 ugboro

Nkọwa ngwaike na interface

LCM interface	FPC40_0.5mm, RGB interface
TP interface	Mmetụ aka ike: FPC6_0.5mm, interface IIC
interface onye ọrụ	Oghere 10Pin_1.0mm maka ọkọnọ ike na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s
Flash	16 MBytes MA Ọ BỤ Flash, maka mkpụrụedemede, foto na faịlụ ọdịyo. Mgbanwe okirikiri: ihe karịrị 100,000 ugboro
Gbasaa Flash	Enwere ike ịgbasa na 64Mbytes NOR Flash ma ọ bụ 48Mbytes NOR Flash+512Mbytes NAND Flash
interface kaadị SD	FAT32. Enwere ike igosipụta faịlụ site na interface SD na ọnụ ọgụgụ. Ọnụego nbudata: 4Mb/s
PGT05 interface	Mgbe ngwaahịa dakwasịrị na mberede, ị nwere ike iji PGT05 imelite kernel DGUS wee mee ka ngwaahịa ahụ laghachi na nkịtị.

Ngosipụta oke

Ụdị LCD	IPS, TFT LCD
Nkiri akụkụ	Akụkụ nlele sara mbara, 85°/85°/85°/85°(L/R/U/D)
Mkpebi	480×480 pikselụ (nkwado 0°/90°/180°/270°)
Agba	24-bit 8R8G8B
Mpaghara nọ n'ọrụ (AA)	D=53.3mm
Lelee Mpaghara (VA)	-
Ụdị ọkụ azụ	Ikanam
Ndụ ọrụ ọkụ azụ	> 20000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị)
Icha ọkụ	DMG48480C021_03WTC: 350nit
Icha ọkụ	DMG48480C021_03WN: 400nit
Njikwa ihie	0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a)
Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge.

Metụ Parameters

Ụdị	Ogwe mmetụ ike (CTP)
Nhazi	Ọdịdị G+F nwere mkpuchi elu nke iko dị ọkụ
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	6H
Mbufe ọkụ	Karịrị 90%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Oghere Usoro Interface Parameters

Ụdị	UART2: ON=TTL/CMOS; Gbanyụọ=RS232 UART4: NA=TTL/CMOS; Gbanyụọ=RS232(Ọ dị naanị mgbe nhazi OS gasịrị)
Ọkwa voltaji	Ọnọdụ ule	Min	Ụdị	Oke	Nkeji
	Mpụta 1, Iout = -4mA	2.7	3.2	-	N'ime
	Mpụta 0, Iout = 4mA	-	0.1	0.4	N'ime
	Ntinye 1	2.4	3.3	5.5	N'ime
	Ntinye 0	0	-	1.0	N'ime
Ọnụego Baud	3150 ~ 3225600bps, uru nke 115200bps
Usoro data	UART2: N81 UART4: N81/E81/O81/N82, 4 ụdịdị (nhazi OS)
USB Interface	10Pin_1.0mm

Nkọwapụta ọkụ eletrik

gburugburu ebe ọrụ