Ngosipụta LCD dị ọnụ ala 10.4 inch DMG80600Y104_04N(ọkwa ịma mma)

Nkọwapụta

Mkpado ngwaahịa

Nkọwapụta

Atụmatụ:

●10.4 inch, 800*600 pikselụ mkpebi,16.7M Agba,24 bit;

● Ihuenyo mmetụ na-eguzogide / Capacitive

●TN-TFT-LCD, nlele anya nkịtị;

● Ọrụ ugbu a :VCC = 12V

●Ụdị: UART2: ON=TTL/CMOS; Gbanyụọ=RS232 UART4: ON=TTL/CMOS; Gbanyụọ=RS232

● eriri ihu: 8Pin_2.0mm

Zitere anyị email Akwụkwọ data

Enyere ike

Voltaji na-arụ ọrụ

7 ~ 36V, uru nke 12V

Na-arụ ọrụ ugbu a

VCC=12V, nnukwu ọkụ azụ

VCC=12V, gbanyụọ ọkụ azụ

Ọkụ ọkụ akwadoro: 12V 1A DC

ASIC

T5L1 ASIC

DWIN mebere ya. Mmepụta oke na 2019,1MBytes Ma ọ bụ Flash na
mgbawa, 512KBytes eji echekwa nchekwa data onye ọrụ. Tinyegharịa okirikiri: gafere100,000 ugboro

Nkọwa ngwaike na interface

LCM interface	FPC60_0.5mm, RGB interface
TP interface	CTP: Ọdịdị COB, interface IIC
TP interface	RTP: FPC4_1.0mm
interface onye ọrụ	Oghere 8Pin_2.0mm maka ọkọnọ ike na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s
Flash	16 MBytes MA Ọ BỤ Flash, maka mkpụrụedemede, foto na faịlụ ọdịyo. Mgbanwe okirikiri: ihe karịrị 100,000 ugboro
Gbasaa Flash	Enwere ike ịgbasa na 64Mbytes NOR Flash ma ọ bụ 48Mbytes NOR Flash+512Mbytes NAND Flash
Buzzer	3V pasive buzzer. Ike:
RTC	Super-capacitor maka ọkọnọ ike. Nke ziri ezi: ± 20ppm@25℃. Ọ nwere ike ịrụ ọrụ nke ọma maka ụbọchị 7 mgbe ike dara
interface kaadị SD	FAT32. Enwere ike igosipụta faịlụ site na interface SD na ọnụ ọgụgụ. Ọnụego nbudata: 4Mb/s
PGT05 interface	Mgbe ngwaahịa dakwasịrị na mberede, ị nwere ike iji PGT05 imelite kernel DGUS wee mee ka ngwaahịa ahụ laghachi na nkịtị.

Ngosipụta oke

Ụdị LCD	TN, TFT LCD
Nkiri akụkụ	Nkiri nlele nkịtị, 70°/70°/50°/70° (L/R/U/D)
Mkpebi	800×600 pikselụ (0°/90°/180°/270°)
Agba	24-bit 8R8G8B
Mpaghara nọ n'ọrụ (AA)	211.2mm (W) × 158.4mm (H)
Ụdị ọkụ azụ	Ikanam
Ndụ ọrụ ọkụ azụ	> 10000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị)
Icha ọkụ	DMG80600Y104_04NC: 200nit
Icha ọkụ	DMG80600Y104_04NR: 150nit
Njikwa ihie	0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a)
Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge.

Metụ Parameters

Ụdị	Ogwe mmetụ ike (CTP)
Nhazi	Ọdịdị G+G nwere mkpuchi elu nke iko dị ọkụ
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	6H
Mbufe ọkụ	Karịrị 90%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Ụdị	RTP (Panel mmetụ mmegide)
Nhazi	Ihe nkiri a + iko a
Ụdị mmetụ	Ebe nkwado aka na dọrọ
Isi ike	3H
Mbufe ọkụ	Karịrị 80%
Ndụ	Ihe karịrị 1,000,000 ugboro metụ aka

Oghere Usoro Interface Parameters

Ụdị	UART2: ON=TTL/CMOS; Gbanyụọ=RS232 UART4: NA=TTL/CMOS; Gbanyụọ=RS232(Ọ dịghị na ọnọdụ nhazi ntụziaka TA. Ọ dị naanị ka nhazi OS dị na DGUS)
Ọkwa voltaji	Ọnọdụ ule	Min	Ụdị	Oke	Nkeji
	Mpụta 1, Iout = -4mA	4.78	5.0	-	N'ime
	Mpụta 0, Iout = 4mA	-	-	0.4	N'ime
	Ntinye 1	2.5	5.0	-	N'ime
	Ntinye 0	-	-	1.0	N'ime
Ọnụego Baud	3150 ~ 3225600bps, uru nke 115200bps
Usoro data	UART2: N81 UART4: N81/E81/O81/N82, 4 ụdịdị (nhazi OS)
USB Interface	8Pin_2.0mm

Nkọwapụta ọkụ eletrik

gburugburu ebe ọrụ