Nkọwapụta
![International ọdụ PCB template](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f9692980eeb84835.jpg)
![1](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f96418b73c764869.jpg)
T5L2 ASIC | DWIN mebere ya. Mmepụta oke na 2019,1MBytes Ma ọ bụ Flash na mgbawa, 512KBytes eji echekwa nchekwa data onye ọrụ. Tinyegharịa okirikiri: gafere100,000 ugboro |
LCM interface | FPC40_0.5mm, MIPI interface |
TP interface | Mmetụ aka ike: usoro COB, interface IIC |
Mmetụ mmegide: 4Pin_1.0mm interface | |
interface onye ọrụ | Oghere 8Pin_2.0mm maka ọkọnọ ike na nzikọrịta ozi. Ọnụego nbudata(uru a na-ahụkarị): 12KByte/s |
Flash | 16 MBytes MA Ọ BỤ Flash, maka mkpụrụedemede, foto na faịlụ ọdịyo. Mgbanwe okirikiri: ihe karịrị 100,000 ugboro |
Gbasaa Flash | Enwere ike ịgbasa na 64Mbytes NOR Flash ma ọ bụ 48Mbytes NOR Flash+512Mbytes NAND Flash |
Buzzer | 3V pasive buzzer. Ike: |
interface kaadị SD | FAT32. Enwere ike igosipụta faịlụ site na interface SD na ọnụ ọgụgụ. Ọnụego nbudata: 4Mb/s |
Edobere modul interface | Modul Wi-Fi: jikọọ na igwe ojii ka imelite ngwa ngwa; modul USB: budata faịlụ site na diski flash USB |
PGT05 interface | Mgbe ngwaahịa dakwasịrị na mberede, ị nwere ike iji PGT05 imelite kernel DGUS wee mee ka ngwaahịa ahụ laghachi na nkịtị. |
Ụdị LCD | IPS, TFT LCD |
Nkiri akụkụ | Akụkụ nlele sara mbara, 85°/85°/85°/85°(L/R/U/D) |
Mkpebi | 800×1280 pikselụ (nkwado 0°/90°/180°/270°) |
Agba | 24-bit 8R8G8B |
Mpaghara nọ n'ọrụ (AA) | 216.58 mm (W) × 135.36 mm (H) |
Ụdị ọkụ azụ | Ikanam |
Ndụ ọrụ ọkụ azụ | > 10000 awa (Oge nke nchapụta na-emebi 50% na ọnọdụ nke na-aga n'ihu na-arụ ọrụ na nchapụta kachasị) |
Icha ọkụ | DMG12800L101_01WTC: 250nit |
DMG12800L101_01WTR: 250nit | |
DMG12800L101_01WN: 300nit | |
Njikwa ihie | 0 ~ 100 ọkwa (Mgbe a na-agbanwe nchapụta ahụ ka ọ bụrụ 1% ~ 30% nke nchapụta kachasị, flickering nwere ike ime na anaghị atụ aro ka iji na nso a) |
Mara: Ị nwere ike iji akwụkwọ ahụaja na-echekwa ihuenyo dị ike ka ịzenarị onyonyo nke ngosipụta ibe edobere kpatara ogologo oge. |
Ụdị | Ogwe mmetụ ike (CTP) |
Nhazi | Ọdịdị G+G nwere mkpuchi elu nke iko dị ọkụ |
Ụdị mmetụ | Ebe nkwado aka na dọrọ |
Isi ike | 6H |
Mbufe ọkụ | Karịrị 90% |
Ndụ | Ihe karịrị 1,000,000 ugboro metụ aka |
Ụdị | RTP (Panel mmetụ mmegide) |
Nhazi | Ihe nkiri a + iko a |
Ụdị mmetụ | Ebe nkwado aka na dọrọ |
Isi ike | 3H |
Mbufe ọkụ | Karịrị 80% |
Ndụ | Ihe karịrị 1,000,000 ugboro metụ aka |
Ụdị |
UART2: ON=TTL/CMOS; Gbanyụọ=RS232 UART4: NA=TTL/CMOS; Gbanyụọ=RS232(Ọ dị naanị mgbe nhazi OS gasịrị) | |||||
Ọkwa voltaji | Ọnọdụ ule | Min | Ụdị | Oke | Nkeji | |
Mpụta 1, Iout = 1mA | 3.0 | - | 3.3 | N'ime | ||
Mpụta 0, Iout = -1mA | - | 0 | 0.3 | N'ime | ||
Ntinye 1, Iin = 1mA | 2.7 | 3.3 | - | N'ime | ||
Ntinye 0, Iin = -1mA | 0 | - | 1.2 | N'ime | ||
Ọnụego Baud | 3150 ~ 3225600bps, uru nke 115200bps | |||||
Usoro data |
UART2: N81 UART4: N81/E81/O81/N82, 4 ụdịdị (nhazi OS) | |||||
USB Interface | 8Pin_2.0mm |
Enyere ike | ||||||
Voltaji na-arụ ọrụ | 7 ~ 15V, uru nke 12V | |||||
Na-arụ ọrụ ugbu a | 300mA | VCC=12V, nnukwu ọkụ azụ | ||||
110mA | VCC=12V, gbanyụọ ọkụ azụ | |||||
Ọkụ ọkụ akwadoro: 12V 1A DC |
Okpomọkụ na-arụ ọrụ | -10 ℃ ~ 60 ℃ (12V @ 60% RH) | |||||
Okpomọkụ nchekwa | -20 ℃ ~ 60 ℃ | |||||
Mkpuchi conformal | Ọ dịghị | |||||
Iru mmiri na-arụ ọrụ | 10% ~ 90% RH, uru nke 60% RH |
DMG12800L101_01WN | Na-enweghị panel mmetụ, Buzzer |
DMG12800L101_01WTR | Ogwe mmetụ mmegide, Buzzer |
DMG12800L101_01WTC | Ogwe mmetụ aka, Buzzer |
DMG80480F070_01W (usoro COF)