Spesifikasyon
Koulè | 16.7M(16777216) koulè | |
Kalite LCD | IPS, TFT LCD | |
Wè Ang | Lajè ang gade, 85/85/85/85 (L/R/U/D) | |
Zòn ekspozisyon (AA) | 61.6mm (W) × 110.1mm (H) | |
Rezolisyon | 480 × 854 piksèl | |
Ekleraj | dirije | |
Klète | EKT050B: 250nit |
Voltage pouvwa | 6 ~ 36V | |
Operasyon aktyèl | VCC = +12V, ekleraj sou, 110mA | |
VCC = +12V, ekleraj koupe, 55mA |
Tanperati travay | -20 ~ 70 ℃ | |
Tanperati Depo | -30 ~ 85 ℃ | |
Travay imidite | 10% ~ 90% RH |
Socket | 50Pin-0.5mm FCC | |
Plas USB | Wi | |
Plas SD | WI (Fòma SDHC/FAT32) |
Flash | Espas Font: 4-12Mbytes | |
Depo foto: 12-4Mbytes | ||
RAM | 128Kbytes | |
Ni Flash | 512Kbytes |
UI vèsyon | TA / DGUSⅡ (DGUSⅡ pre-enstale) | |
Periferik | Panèl manyen kapasitif, Buzzer |
Dimansyon | 69.9mm (W) ×120.7mm (H) ×17.3mm (T) | |
Pwa nèt | 120g |
PIN | Definisyon | Deskripsyon |
1# | GND | Tè komen |
2# | RX4 | UART4 Resepsyon done |
3# | RX5 | UART5 Resepsyon done |
4# | P01 | Mwen/O bouch |
5# | CRX | CAN koòdone done resepsyon |
6# | RX2 | Done UART2 k ap resevwa |
7# | P07 | I/O |
8# | P15 | I/O |
9# | P17 | I/O |
10# | P21 | I/O |
11# | P23 | I/O |
12# | P25 | I/O |
13# | P27 | I/O |
14# | P31 | I/O |
15# | P33 | I/O |
16# | FTX | Resepsyon done transceiver FSK |
17# | ADC0 | AD antre |
18# | ADC2 | AD antre |
19# | ADC5 | AD antre |
20# | ADC7 | AD antre |
venn yonn # | PWM1 | 16bit PWM pwodiksyon |
vennde# | 5V | opinyon pouvwa |
venntwa# | TX4 | Transmisyon done UART4 |
vennkat# | TX5 | Transmisyon done UART5 |
25# | P0.0 | I/O |
26# | CTX | CAN koòdone transmisyon done |
27# | TX2 | Transmisyon done UART2 |
28# | P06 | I/O |
29# | P14 | I/O |
30# | P16 | I/O |
31# | P20 | I/O |
32# | P22 | I/O |
33# | P24 | I/O |
34# | P26 | I/O |
35# | P30 | I/O |
36# | P32 | I/O |
37# | RSTN | D' sistèm réinitialiser |
38# | FRX | Transmisyon done transceiver FSK |
39# | ADC1 | AD antre |
40# | ADC3 | AD antre |
41# | ADC6 | AD antre |
42# | PWM0 | 16bit PWM pwodiksyon |