Specification
| LCM interface | MIPI interface |
| TP interface | Capacitive kov: COB qauv, IIC interface |
| Resistive kov: FPC4_1.0mm | |
| Tus neeg siv interface | 8Pin_2.0mm lub qhov (socket) rau cov khoom siv hluav taws xob thiab kev sib txuas lus serial. Tus nqi rub tawm (tus nqi raug): 14KByte/s |
| Flash | 16 MBytes NOR Flash, rau fonts, duab thiab audio files. Rewrite voj voog: tshaj 100,000 zaug |
| Nthuav Flash | Expandable rau 64Mbytes NOR Flash lossis 48Mbytes NOR Flash + 512Mbytes NAND Flash |
| Buzzer | 3V passive buzzer. Lub zog: |
| RTC | Khawm cell rau fais fab mov. Qhov tseeb: ± 20ppm @ 25 ℃ |
| SD daim npav interface | FAT32. Rub tawm cov ntaub ntawv los ntawm SD interface tuaj yeem tso tawm hauv cov txheeb cais. Download tus nqi: 4 Mb/s |
| Reserved module interface |
Wi-Fi module: txuas rau huab platform los hloov kho remotely; USB module: rub tawm cov ntaub ntawv los ntawm USB flash disk |
| PGT05 interface | Thaum cov khoom sib tsoo los ntawm kev sib tsoo, koj tuaj yeem siv PGT05 los hloov kho DGUS kernel thiab ua kom cov khoom rov qab mus rau qhov qub. |
| Hom LCD | IPS, TFT LCD |
| Saib lub kaum sab xis | Kev pom dav dav, 85 ° / 85 ° / 85 ° / 85 ° (L / R / U / D) |
| Kev daws teeb meem | 800 × 1280 pixels (0 ° / 90 ° / 180 ° / 270 °) |
| Xim | 24-ntsis 8R8G8B |
| Active Area (AA) | 150.72 hli (W) × 94.20mm (H) |
| Backlight hom | LED |
| Backlight Service Lub Neej | > 20000 teev (Lub sij hawm ntawm qhov ci ntsa iab mus rau 50% ntawm qhov xwm txheej ntawm kev ua haujlwm tsis tu ncua nrog qhov siab tshaj plaws ci) |
| Brightness | DMG12800C070_03WTC: 300nit |
| DMG12800C070_03WTR: 250nit | |
| DMG12800C070_03WN: 300nit | |
| Tswj Brightness | 0 ~ 100 qib (Thaum lub brightness hloov mus rau 1% ~ 30% ntawm qhov siab tshaj plaws brightness, flickering yuav tshwm sim thiab tsis pom zoo kom siv nyob rau hauv no ntau yam) |
| Nco tseg: Koj tuaj yeem siv cov duab thaij duab txuag hluav taws xob kom tsis txhob muaj cov duab tom qab los ntawm cov nplooj ntawv ruaj khov rau lub sijhawm ntev. | |
| Hom | CTP (Capacitive touch vaj huam sib luag) |
| Qauv | G + G qauv nrog nto npog ntawm tempered iav |
| Kov hom | Kev kov ib leeg thiab txhawb nqa kev zawv zawg tas li |
| Nto Hardness | 6 H |
| Lub teeb Transmittance | Tshaj 90% |
| Lub neej | Tshaj 1,000,000 zaug kov |
| Hom | RTP (Resistive kov vaj huam sib luag) |
| Qauv | THIS zaj duab xis + THIS iav |
| Kov hom | Kev kov ib leeg thiab txhawb nqa kev zawv zawg tas li |
| Nto Hardness | 3 H |
| Lub teeb Transmittance | Tshaj 80% |
| Lub neej | Tshaj 1,000,000 zaug kov |
| Hom |
UART2: ON = TTL/CMOS; OFF = RS232 UART4: ON = TTL/CMOS; OFF = RS232 (Tsuas muaj tom qab OS teeb tsa) | |||||
| Qib voltage | Kev kuaj mob | Min | Hom | Max | Chav tsev | |
| Cov zis 1, Iout = -4mA | 4.78 ib | 5.0 | - | IN | ||
| Cov zis 0, Iout = 4mA | - | - | 0.4 | IN | ||
| Input 1 | 2.5 | 5.0 | - | IN | ||
| Input 0 | 0 | - | 1.0 | IN | ||
| Baud Rate | 3150 ~ 3225600bps, tus nqi raug ntawm 115200bps | |||||
| Cov ntaub ntawv hom |
UA 2: N81 UART4: N81/E81/O81/N82 , 4 hom (OS configuration) | |||||
| Interface Cable | 8 Pin_2.0mm | |||||
| Rated zog | ||||||
| Kev khiav hauj lwm voltage | 6 ~ 36V, tus nqi raug ntawm 12V | |||||
| Kev khiav hauj lwm tam sim no | 200 mA | VCC = 12V, max backlight | ||||
| 80mA ua | VCC = 12V, backlight off | |||||
| Pom zoo fais fab mov: 12V 1A DC | ||||||
| Ua haujlwm kub | -10 ℃ ~ 50 ℃ (12V @ 60% RH) | |||||
| Cia Kub | -20 ℃ ~ 60 ℃ | |||||
| Conformal Txheej | Tsis muaj | |||||
| Kev khiav dej num | 10% ~ 90% RH, tus nqi raug 60% RH | |||||
