5.6 Nti HMI TFT LCD Qauv: DMG64480T056_01W (Industrial Qib)

Nta:

● Tus kheej tsim T5L0, 262K Xim 18-ntsis, 640 * 480 Pixel IPS, 5.6 nti zaub;

● Tsis muaj kov / Resistive touch modules / Capacitive screen yeem;

● TTL lossis 232 Tus neeg siv interface, 8Pin 2.0mm cable;

● Download tau los ntawm SD card los yog on-line uart chaw nres nkoj;

●DWIN DGUS V7.6 GUIs Kev Txhim Kho, tsis muaj tus lej nug thiab txhim kho yooj yim;

● Txoj Kev Tsim Nyog: DGUSⅡ/TA (Kev qhia txheej txheem);

● Lub kaum sab xis saib, 70 ° / 70 ° / 50 ° / 70 ° (L / R / U / D)

Xa email rau peb Cov ntaub ntawv 3D Cov ntaub ntawv

Specification

Video

Hardware thiab interface piav qhia

LCM interface	FPC50_0.5mm, RGB interface
TP interface	Capacitive kov: COB qauv, IIC interface
TP interface	Resistive kov: 4Pin_1.0mm interface
Tus neeg siv interface	8Pin_2.0mm lub qhov (socket) rau cov khoom siv hluav taws xob thiab kev sib txuas lus serial. Tus nqi rub tawm (tus nqi raug): 12KByte/s
Flash	16 MBytes NOR Flash, rau fonts, duab thiab audio files. Rewrite voj voog: tshaj 100,000 zaug
Nthuav Flash	Expandable rau 64Mbytes NOR Flash lossis 48Mbytes NOR Flash + 512Mbytes NAND Flash
Buzzer	3V passive buzzer. Lub zog:
RTC	Super-capacitor rau lub hwj chim mov. Qhov tseeb: ± 20ppm @ 25 ℃. Nws tuaj yeem ua haujlwm ib txwm rau 7 hnub tom qab fais fab tuag
SD daim npav interface	FAT32. Rub tawm cov ntaub ntawv los ntawm SD interface tuaj yeem tso tawm hauv cov txheeb cais. Download tus nqi: 4 Mb/s
Reserved module interface	Wi-Fi module: txuas rau huab platform los hloov kho remotely; USB module: rub tawm cov ntaub ntawv los ntawm USB flash disk
PGT05 interface	Thaum cov khoom sib tsoo los ntawm kev sib tsoo, koj tuaj yeem siv PGT05 los hloov kho DGUS kernel thiab ua kom cov khoom rov qab mus rau qhov qub.

Zaub Parameters

Hom LCD	TN, TFT LCD
Saib lub kaum sab xis	Lub kaum sab xis saib, 70 ° / 70 ° / 50 ° / 70 ° (L / R / U / D)
Kev daws teeb meem	640 × 480 pixels (kev txhawb nqa 0 ° / 90 ° / 180 ° / 270 °)
Xim	18-ntsis 6R6G6B
Active Area (AA)	112.90 hli (W) × 84.67 hli (H)
Backlight hom	LED
Backlight Service Lub Neej	> 30000 teev (Lub Sijhawm ntawm qhov ci ntsa iab mus rau 50% ntawm qhov kev ua haujlwm tsis tu ncua nrog qhov siab tshaj plaws ci)
Brightness	DMG64480T056_01WTC: 250nit
	DMG64480T056_01WTR: 250nit
	DMG64480T056_01WN: 300nit
Tswj Brightness	0 ~ 100 qib (Thaum lub brightness hloov mus rau 1% ~ 30% ntawm qhov siab tshaj plaws brightness, flickering yuav tshwm sim thiab tsis pom zoo kom siv nyob rau hauv no ntau yam)
Nco tseg: Koj tuaj yeem siv cov duab thaij duab txuag hluav taws xob kom tsis txhob muaj cov duab tom qab los ntawm cov nplooj ntawv ruaj khov rau lub sijhawm ntev.

Kov Parameters

Hom	CTP (Capacitive touch vaj huam sib luag)
Qauv	G + G qauv nrog nto npog ntawm tempered iav
Kov hom	Txhawb taw tes kov thiab luag
Nto Hardness	6 H
Lub teeb Transmittance	Tshaj 90%
Lub neej	Tshaj 1,000,000 zaug kov

Hom	RTP (Resistive kov vaj huam sib luag)
Qauv	THIS zaj duab xis + THIS iav
Kov hom	Txhawb taw tes kov thiab luag
Nto Hardness	3 H
Lub teeb Transmittance	Tshaj 80%
Lub neej	Tshaj 1,000,000 zaug kov

Serial Interface Parameters

Hom	UART2: ON = TTL/CMOS; OFF = RS232 UART4: ON = TTL/CMOS; OFF = RS232 (Tsuas muaj tom qab OS teeb tsa)
Qib voltage	Kev kuaj mob	Min	Hom	Max	Chav tsev
	Cov zis 1, Iout = -4mA	4.78 ib	5.0	-	IN
	Cov zis 0, Iout = 4mA	-	-	0.4	IN
	Input 1	2.5	5.0	5.5	IN
	Input 0	-	-	1.0	IN
Baud Rate	3150 ~ 3225600bps, tus nqi raug ntawm 115200bps
Cov ntaub ntawv hom	2: N81 UART4: N81/E81/O81/N82 , 4 hom (OS configuration)
Interface Cable	8 Pin_2.0mm

Hluav taws xob specifications