Hōʻike
| T5L2 ASIC*3 | Kūkulu ʻia e DWIN. Hana nui ma 2019,1MBytes a i ʻole Flash ma ka chip, 512KBytes i hoʻohana ʻia e mālama i ka waihona mea hoʻohana. E kākau hou i ka pōʻaiapuni: pau100,000 manawa |
| LCM interface | FPC30_0.5mm, hoʻopili eDP |
| CTP interface | Pākuʻi Capacitive: ʻano COB, IIC interface |
| Mea hoʻohana | 8Pin_2.0mm socket no ka lako mana a me ke kamaʻilio serial. Ka helu hoʻoiho (waiwai maʻamau): 12KByte/s |
| Flash | 32 MBytes NOR Flash, no nā font, nā kiʻi a me nā faila leo. E kākau hou i ka pōʻai: ʻoi aku ma mua o 100,000 mau manawa |
| E hoʻonui i ka Flash | Hiki ke hoʻonui ʻia i 64Mbytes NOR Flash a i ʻole 48Mbytes NOR Flash+512Mbytes NAND Flash |
| Buzzer | 3V puʻupuʻu hāʻule. Mana: |
| RTC | Super-capacitor no ka lako mana. Pono: ± 20ppm@25 ℃. Hiki iā ia ke hana maʻamau no 7 mau lā ma hope o ka pau ʻana o ka mana |
| Pākuʻi leo | 2Pin_2.0mm socket, mea hoʻopuka leo |
| Kāleka SD | FAT32. Hiki ke hōʻike ʻia nā faila ma ka SD interface i nā helu. Laki hoʻoiho: 4Mb/s |
| Hoʻokaʻawale ʻia ka module interface | Module Wi-Fi: hoʻopili i ka paepae ao e hoʻohou i ka module USB mamao: hoʻoiho i nā faila ma ka USB flash disk |
| PGT05 pāʻani | Ke hāʻule ka huahana ma ka pōʻino, hiki iā ʻoe ke hoʻohana i ka PGT05 e hōʻano hou i ka kernel DGUS a hoʻihoʻi i ka huahana i ka maʻamau. |
| ʻAno LCD | IPS, TFT LCD |
| ʻO ka nānā ʻana | ʻIke ākea ākea, 85°/85°/85°/85°（L/R/U/D） |
| Olelo Hooholo | 1920×1080 pika (0°/90°/180°/270°) |
| kalakala | 18-bit 6R6G6B |
| Wahi Hana (AA) | 382.9mm (W)×215.8mm (H) |
| Keʻano kukui hope | LED |
| Ke ola lawelawe ʻana i ke kukui | > 20000 hola (ʻO ka manawa o ka'ōlinolino e pohō ana i ka 50% ma ke ʻano o ka hana mau ʻana me ka ʻoi loa o ka mālamalama) |
| ʻōlinolino | DMG19108C173_05WTC: 200nit |
| DMG19108C173_05WN: 250nit | |
| Hoʻomalu ʻālohilohi | 0 ~ 100 papa (Ke hoʻololi ʻia ka ʻōlinolino i 1% ~ 30% o ka ʻālohilohi kiʻekiʻe, hiki ke ʻā a ʻaʻole ʻōlelo ʻia e hoʻohana i kēia pae) |
| 'Ōlelo Aʻo: Hiki iā ʻoe ke hoʻohana i nā kiʻi paʻi kiʻi ʻoniʻoni e pale aku i nā kiʻi ma hope o ka hōʻike ʻana i ka ʻaoʻao paʻa no ka manawa lōʻihi. | |
| ʻAno | CTP (panana hoʻopaʻa paʻa kaha) |
| Kapili | ʻO ka hale G+FF me ka uhi ʻili o ke aniani hoʻonaninani |
| ʻAno hoʻopā | Kākoʻo i ke kiko kiko a kauo |
| ʻOoleʻa ʻili | 6H |
| Hoʻomāmā | Ma luna o 90% |
| Ola | Ma luna o 1,000,000 mau manawa pā |
| Ke ano |
UART2: ON=TTL/CMOS; OFF=RS232 | |||||
| Ka Papa Voltage | Kūlana hoʻāʻo | Min | ʻAno | Max | Unite | |
| Puke 1, Iout = -4mA | 4.78 | 5.0 | - | IN | ||
| Puka 0, Iout = 4mA | - | - | 0.4 | IN | ||
| Hoʻokomo 1 | 2.5 | 5.0 | - | IN | ||
| Hookomo 0 | - | - | 1.0 | IN | ||
| Pākuʻi Baud | 3150~3225600bps, waiwai maʻamau o 115200bps | |||||
| Hōʻikeʻikepili | UART2: N81 | |||||
| Uea Interface | 8Pina_2.0mm | |||||
| Mana i helu ʻia | ||||||
| Voltage Hana | 12~36V, waiwai maʻamau o 12V | |||||
| Hana i kēia manawa | 720mA | VCC=12V, ke kukui hope loa | ||||
| 180mA | VCC=12V, pio ke kukui hope | |||||
| Manaʻo mana lako: 12V 1A DC | ||||||
| Ka Mahana Hana | 0 ℃~50 ℃ (12V @ 60% RH) | |||||
| Ka Mahana Waihona | -20 ℃~60 ℃ | |||||
| Hoʻopiʻi Conformal | ʻAʻohe | |||||
| ʻO ka haʻahaʻa hana | 10% ~ 90% RH, waiwai maʻamau o 60% RH | |||||
