Hōʻike
| DT322X220034Z240201J | ʻAʻohe pā |
| DT322X220034Z240201K | Hoʻopā kaha |
| DT322X220034Z240201L | Pākuʻi kūʻē |
| LCM interface | FPC50_0.5mm, pānaehana RGB |
| TP interface | Pākuʻi Capacitive: ʻano COB, IIC interface |
| Paʻi kūʻē: 4Pin_1.0mm interface | |
| Mea hoʻohana | 8Pin_2.0mm socket no ka lako mana a me ke kamaʻilio serial. Ka helu hoʻoiho (waiwai maʻamau): 12KByte/s |
| Flash | 16 MBytes NOR Flash, no nā font, nā kiʻi a me nā faila leo. E kākau hou i ka pōʻai: ʻoi aku ma mua o 100,000 mau manawa |
| Buzzer | 3V hoʻopaʻa haʻahaʻa. Mana: |
| RTC | Super-capacitor no ka lako mana. Pono: ± 20ppm@25 ℃. Hiki iā ia ke hana maʻamau no 7 mau lā ma hope o ka pau ʻana o ka mana |
| Kāleka SD 1 | FAT32. Hiki ke hōʻike ʻia nā faila ma ka SD interface i nā helu. Laki hoʻoiho: 4Mb/s |
| Kāleka SD interface 2 | Kākoʻo i ka mālama ʻana i ka ʻikepili kiʻi kamera |
| E hoʻopololei i ka ʻaoʻao | 4Pin_ 2.54mm interface, ʻaʻole i wehe ʻia no ka hoʻohana |
| Pākuʻi USB | Horizontal USB interface, Hoʻohana ʻia no ka puhi ʻana i ka firmware |
| Pākuʻi USB micro | Hoʻohana ʻia no ka puhi ʻana i ka firmware R11 |
| Pākuʻi paʻi kiʻi | 2 pine_ 2.0mm kumu paepae * 1 a me 2 pine_ 2.54mm kumu kū pololei *1 (kākoʻo i ka hoʻohui ʻana i hoʻokahi 1080P a i ʻole ʻelua mau pahu kiʻi 720P, a i ka wā e hoʻohui ai i ʻelua kahawai, ʻo ke ʻano like ka pahu pahu. ka lua) |
| PGT05 pāʻani | Ke hāʻule ka huahana ma ka pōʻino, hiki iā ʻoe ke hoʻohana i ka PGT05 e hōʻano hou i ka kernel DGUS a hoʻihoʻi i ka huahana i ka maʻamau. |
| ʻAno LCD | IPS, TFT LCD |
| ʻO ka nānā ʻana | ʻO ka huina nānā ākea, 85°/85°/85°/85°（L/R/U/D） |
| Olelo Hooholo | 1024×600 pika (kākoʻo 0°/90°/180°/270°) |
| kalakala | 24-bit 8R8G8B |
| Wahi Hana (AA) | 222.72mm (W)×125.28mm (H) |
| Keʻano kukui hope | LED |
| Ke ola lawelawe ʻana i ke kukui | > 20000 hola (ʻO ka manawa o ka'ōlinolino e pohō ana i ka 50% ma ke ʻano o ka hana mau me ka ʻoi loa o ka mālamalama) |
| Olinolino | DT322X220034Z240201J: 250nit |
| DT322X220034Z240201K: 200nit | |
| DT322X220034Z240201L: 150nit | |
| Hoʻomalu ʻālohilohi | 0 ~ 100 papa (Ke hoʻololi ʻia ka ʻōlinolino i 1% ~ 30% o ka ʻālohilohi kiʻekiʻe, hiki ke ʻā a ʻaʻole ʻōlelo ʻia e hoʻohana i kēia pae) |
| 'Ōlelo Aʻo: Hiki iā ʻoe ke hoʻohana i nā kiʻi paʻi kiʻi ʻoniʻoni e pale aku i nā kiʻi ma hope o ka hōʻike ʻana i ka ʻaoʻao paʻa no ka manawa lōʻihi. | |
| ʻAno | CTP (panana hoʻopaʻa paʻa kaha) |
| Kapili | ʻO ka hale G+G me ka uhi ʻili o ke aniani hoʻoheheʻe ʻia |
| ʻAno hoʻopā | Kākoʻo i ke kiko kiko a kauo |
| ʻOoleʻa ʻili | 6H |
| Hoʻomāmā | Ma luna o 85% |
| Ola | > 20000 hola |
| ʻAno | RTP (pane hoʻopaʻa kūʻē) |
| Kapili | KEIA kiʻiʻoniʻoni + KEIA aniani |
| ʻAno hoʻopā | Kākoʻo i ke kiko kiko a kauo |
| ʻOoleʻa ʻili | 3H |
| Hoʻomāmā | 78%±3% |
| Ola | Ma luna o 1,000,000 mau manawa pā |
| Ke ano |
UART2: ON=TTL/CMOS; OFF=RS232(RS232 paʻamau) UART4: ON=TTL/CMOS; OFF=RS232(Loaʻa wale ma hope o ka hoʻonohonoho OS) | |||||
| Ka Papa Voltage | Kūlana hoʻāʻo | Min | ʻAno | Max | Unite | |
| Hoʻopuka 1, Iout = -4mA | 4.78 | 5.0 | - | IN | ||
| Puka 0, Iout = 4mA | - | - | 0.4 | IN | ||
| Hookomo 1 | 2.5 | 5.0 | - | IN | ||
| Hookomo 0 | - | - | 1.0 | IN | ||
| Pākuʻi Baud | 3150~3225600bps, waiwai maʻamau o 115200bps | |||||
| Hōʻikeʻikepili |
UART2: N81 UART4: N81/E81/O81/N82 , 4 mau ʻano (hoʻonohonoho OS) | |||||
| Uea Interface | 8Pina_2.0mm | |||||
| Mana i helu ʻia | ||||||
| Voltage Hana | 6~36V, waiwai maʻamau o 12V | |||||
| Hana i kēia manawa | 400mA | VCC=12V, ke kukui hope loa | ||||
| 160mA | VCC=12V, pio ke kukui hope | |||||
| Manaʻo mana lako: 12V 1A DC | ||||||
| Ka Mahana Hana | -20 ℃~70 ℃ (12V @ 60% RH) | |||||
| Ka Mahana Waihona | -30 ℃~80 ℃ | |||||
| Hoʻopiʻi Conformal | ʻAe | |||||
| ʻO ka haʻahaʻa hana | 10% ~ 90% RH, waiwai maʻamau o 60% RH | |||||
