12.1 inch HMI Nuni Taɓawar Panel DMG10768T121_01W(Ma'aunin Masana'antu)

Ƙayyadaddun bayanai

Bayani

Tags samfurin

Ƙayyadaddun bayanai

12.1 inch HMI Nuni Taɓa Taɓawa DMG10768T121_01W

DWIN 1024*RGB*768,UART LCM

Siffofin:

● Dangane da T5L mai ƙira2ASIC, Launi 16.7M, 24bit,1024*768Pixel;

● Babu allon taɓawa / Allon taɓawa mai juriya / allon taɓawa mai ƙarfi;

● TTLSaukewa: RS232Interface,8Pin2.0mm haɗin waya;

● Zazzagewa ta katin SD ko tashar jiragen ruwa ta kan layi;

● Sauƙi-da-amfani DWIN DGUS V7.6 GUIs Haɓaka, babu ƙwarewar coding da ake buƙata;

● Tsarin Haɓakawa Dual: DGUS II / TA (Saitin Umurni);

● IPS Duban kusurwa: 85/85/85/85 (L / R / U / D);

● Tare da GUI & OS dual-core, GUI tare da sarrafawa masu wadata. DWIN OS kernel bude ne ga mai amfani don ci gaba na biyu, ta DWIN OS harshe ko KEIL C51.

Aika mana imel Takardar bayanai 3D Data

Bidiyo

Ƙarfin Ƙarfi

Aiki Voltage

12 ~ 36V, matsakaicin darajar 12V

Aiki Yanzu

VCC=12V, max hasken baya

VCC=12V, an kashe hasken baya

Nasihar wutar lantarki: 12V 1.5A DC

Hardware da bayanin dubawa

Mai amfani dubawa	8Pin_2.0mm soket don samar da wutar lantarki da sadarwar serial. Ƙimar zazzagewa (ƙimar ta yau da kullun): 12KByte/s
Filasha	32MBytes (2*16MBytes NOR Flash), ana iya amfani da shi don adana fayilolin UI mai amfani kamar fonts, hotuna, kiɗa, da sauransu, tare da gogewa / rubuta hawan keke> sau 100,000
Fadada filashin filashi	Akwai ramukan haɓakawa guda biyu, suna tallafawa faɗaɗa NOR Flash da NAND Flash. Matsakaicin fadada don NOR Flash ya kai 64Mbytes. Lokacin haɗa NOR Flash da NAND Flash, matsakaicin haɓaka yana zuwa 48Mbytes (amfani da ramin faɗaɗa ɗaya) + 512Mbytes
Buzzer	3V m buzzer
RTC	Super-capacitor yana ba da ƙarfi ga RTC, daidaito: ± 20ppm @25 ℃. Zai iya kula da aiki na yau da kullun na kwanaki 7 bayan kashe wutar lantarki. Da'irar da'ira mai dacewa da maɓalli tantanin halitta.
Ramin katin SD	FAT32. Zazzage fayiloli ta hanyar dubawar SD za a iya nuna su a cikin ƙididdiga. Yawan saukewa: 4Mb/s
Ƙaddamar da ƙirar ƙirar ƙira	Yana goyan bayan soldering na WI-FI module da kebul download module. Samfurin WI-FI: WI-FI-10; Samfuran USB: HDL702, HDL703
Saukewa: PGT05	An yi amfani da shi don sake tsara tushen firmware na DGUS

Nuni Ma'auni

Nau'in LCD	IPS tsarin TFT nuni
Duban kusurwa	Babban kusurwar kallo (masu ƙima sune 85 ° / 85 ° / 85 ° / 85 °), babban bambanci, da haɓaka launi mai kyau.
Ƙaddamarwa	1024×768 pixels (goyan bayan 0°/90°/180°/270°)
Launi	16.7M launi (24-bit 8R8G8B)
Yanki Mai Aiki (AA)	245.76mm (W) × 184.32mm (H)
Interface	LVDS
Yanayin Hasken Baya	LED
Rayuwar Sabis na Hasken Baya	> 30000 hours (Lokacin haske yana raguwa zuwa 50% akan yanayin ci gaba da aiki tare da matsakaicin haske)
Haske	DMG10768T121_01WTC: 400nit
	DMG10768T121_01WTR: 400nit
	DMG10768T121_01WN: 450nit
Kula da Haske	0 ~ 100 (Lokacin da aka daidaita haske zuwa 1% ~ 30% na matsakaicin haske, flickering na iya faruwa kuma ba a ba da shawarar amfani da shi a cikin wannan kewayon)
Lura: Kuna iya amfani da bangon bangon bangon bangon bango mai ƙarfi don guje wa hotunan da ke haifar da ƙayyadaddun nunin shafi na dogon lokaci.

Taɓa Sigina

Nau'in	CTP (Karfafa taɓawa)
Interface	I²C
Tsarin	Tsarin G+G tare da murfin saman gilashin
Yanayin taɓawa	Taɓa aya ɗaya da goyan bayan taɓawar zamiya mai ci gaba
Taurin Sama	6H ku
Canjin Haske	>90%
Rayuwa	Sama da sau 1,000,000 suna taɓawa

Nau'in	RTP (Resistive touch panel)
Tsarin	WANNAN fim + WANNAN gilashi
Yanayin taɓawa	Taɓa aya ɗaya da goyan bayan taɓawar zamiya mai ci gaba
Taurin Sama	3H
Canjin Haske	> 80%
Rayuwa	Sama da sau 1,000,000 suna taɓawa

Serial Interface Parameters

Yanayin	UART2: ON=TTL/CMOS; KASHE=RS232 UART4: ON=TTL/CMOS; KASHE=RS232(Sai dai akwai bayan tsarin OS)
Matsayin Wutar Lantarki	Yanayin Gwajin	Min	Nau'in	Max	Naúrar
	Fitowa 1, Iout = -4mA	4.78	5.0	-	IN
	Fitowa 0, Iout = 4mA	-	-	0.4	IN
	Shigarwa 1	2.5	5.0	-	IN
	Shigarwa 0	-	-	1.0	IN
Baud Rate	3150 ~ 3225600bps, matsakaicin darajar 115200bps
Tsarin Bayanai	UART2: N81 UART4: N81/E81/O81/N82, 4 halaye (tsarin OS)
Kebul na Interface	8Pin_2.0mm

Bayanan lantarki