Ƙayyadaddun bayanai
| Mai amfani dubawa | 8Pin_2.0mm soket don samar da wutar lantarki da sadarwar serial. Ƙimar zazzagewa (ƙimar ta yau da kullun): 12KByte/s |
| Filasha | 16 MBytes KO Flash, don fonts, hotuna da fayilolin mai jiwuwa. Sake sake rubutawa: sama da sau 100,000 |
| Fadada filashin filashi | Akwai ramukan haɓaka uku, suna tallafawa faɗaɗa NOR Flash da NAND Flash. Matsakaicin fadada don NOR Flash ya kai 64Mbytes. Lokacin haɗa NOR Flash da NAND Flash, matsakaicin haɓakawa yana zuwa 48Mbytes (amfani da ramukan haɓakawa guda biyu) + 512Mbytes. Lokacin faɗaɗa Flash, abubuwan da aka haɗa kamar decoders da capacitors suna buƙatar siyarwa. Da fatan za a tuntuɓi mai siyar da daidai don gyare-gyaren da ya dace (Yana cikin murfin garkuwa) |
| Buzzer | 3V m buzzer |
| RTC | Super-capacitor yana ba da ƙarfi ga RTC, daidaito: ± 20ppm @25 ℃. Zai iya kula da aiki na yau da kullun na kwanaki 7 bayan kashe wutar lantarki. Da'irar da'ira mai dacewa da maɓalli tantanin halitta. |
| Ramin katin SD | Yana goyan bayan zazzage duk fayiloli (fayil ɗin UI mai amfani, fayilolin CFG, firmware na kernel), yana nuna ƙididdigar zazzagewa akan allon, ƙimar saukewa: 4 Mb/s. Lokacin zazzage fayiloli, katin SD yana buƙatar tsara shi a cikin tsarin FAT32, tare da shawarar rabon yanki na 4096 |
| Ƙaddamar da ƙirar ƙirar ƙira | Yana goyan bayan soldering na WI-FI module da kebul download module. Samfurin WI-FI: WI-FI-10; Samfuran USB: HDL702, HDL703 |
| Saukewa: PGT05 | An yi amfani da shi don sake tsara tushen firmware na DGUS |
| Nau'in LCD | TN tsari TFT LCD allon |
| Duban kusurwa | Matsakaicin kallon al'ada, 70°/70°/50°/70° (L/R/U/D) |
| Ƙaddamarwa | 800×600 pixels (goyan bayan 0°/90°/180°/270°) |
| Launi | 16.7M launi (24-bit 8R8G8B) |
| Yanki Mai Aiki (AA) | 162.00mm (W) × 121.50mm (H) |
| Interface | RGB |
| Yanayin Hasken Baya | LED |
| Rayuwar Sabis na Hasken Baya | > 30000 hours (Lokacin haske yana raguwa zuwa 50% akan yanayin ci gaba da aiki tare da matsakaicin haske) |
| Haske | DMG80600T080_02WTC: 300nit |
| DMG80600T080_02WTR: 250nit | |
| DMG80600T080_02WN: 350nit | |
| Kula da Haske | 0 ~ 100 (Lokacin da aka daidaita haske zuwa 1% ~ 30% na matsakaicin haske, flickering na iya faruwa kuma ba a ba da shawarar amfani da shi a cikin wannan kewayon) |
| Lura: Kuna iya amfani da bangon bangon bangon bangon bango mai ƙarfi don guje wa hotunan da ke haifar da ƙayyadaddun nunin shafi na dogon lokaci. | |
| Nau'in | CTP (Kwamfutan taɓawa) |
| Interface | I²C |
| Tsarin | Taɓa aya ɗaya da goyan bayan taɓawar zamiya mai ci gaba |
| Yanayin taɓawa | Taimako wurin taɓawa da ja |
| Taurin Sama | 6H ku |
| Canjin Haske | > 85% |
| Rayuwa | Sama da sau 1,000,000 suna taɓawa |
| Nau'in | RTP (Resistive touch panel) |
| Tsarin | WANNAN fim + WANNAN gilashi |
| Yanayin taɓawa | Taɓa aya ɗaya da goyan bayan taɓawar zamiya mai ci gaba |
| Taurin Sama | 3H |
| Canjin Haske | > 80% |
| Rayuwa | Sama da sau 1,000,000 suna taɓawa |
| Yanayin |
UART2: ON=TTL/CMOS; KASHE=RS232 UART4: ON=TTL/CMOS; KASHE=RS232(Sai dai akwai bayan tsarin OS) | |||||
| Matsayin Wutar Lantarki | Yanayin Gwajin | Min | Nau'in | Max | Naúrar | |
| Fitowa 1, Iout = -4mA | 4.78 | 5.0 | - | IN | ||
| Fitowa 0, Iout = 4mA | - | - | 0.4 | IN | ||
| Shigarwa 1 | 2.5 | 5.0 | - | IN | ||
| Shigarwa 0 | - | - | 1.0 | IN | ||
| Baud Rate | 3150 ~ 3225600bps, matsakaicin darajar 115200bps | |||||
| Tsarin Bayanai |
UART2: N81 UART4: N81/E81/O81/N82, 4 halaye (tsarin OS) | |||||
| Kebul na Interface | 8Pin_2.0mm | |||||
| Ƙarfin Ƙarfi | ||||||
| Wutar lantarki mai aiki | 6 ~ 36V, matsakaicin darajar 12V | |||||
| Aiki Yanzu | 280 ~ 320mA | VCC=12V, max hasken baya | ||||
| 100mA | VCC=12V, an kashe hasken baya | |||||
| Shawarar wutar lantarki: 12V 1A DC | ||||||
| Yanayin Aiki | -20 ℃ ~ 70 ℃ (12V @ 60% RH) | |||||
| Ajiya Zazzabi | -30 ℃ ~ 80 ℃ | |||||
| Rubutun Conformal | Ee | |||||
| Humidity Mai Aiki | 10% ~ 90% RH, ƙimar al'ada na 60% RH | |||||
