Model Module 5 Inci HMI LCD: DMG80480C050_03W(Girman Kasuwanci)

Siffofin:

● Gudun tsarin DGUS II, darajar kasuwanci.

● 5.0 inch, 800*480 pixels ƙuduri, 24bit Launuka.

● Babu allon taɓawa / Allon taɓawa mai juriya / zaɓin allo mai ƙarfi;

● 10Pin1.0mm FCC haɗin waya, goyan bayan TTL / RS232 Interface;

● Sauƙin ƙira, 16Mb Flash HMI Smart Nuni.

● Babban misali TFT LCD, TN Panel. Kusurwar kallo shine 70°/70°/50°/70° (L/R/U/D).

● Lokacin da samfur ya yi karo da haɗari, zaka iya amfani da PGT05 don sabunta kwaya ta DGUS da mayar da samfurin zuwa al'ada.

Aika mana imel Takardar bayanai 3D Data

Ƙayyadaddun bayanai

Bidiyo

Hardware da bayanin dubawa

Mai amfani dubawa	10Pin_1.0mm soket ɗin latching don samar da wutar lantarki da sadarwar serial. Ƙimar zazzagewa (ƙimar ta yau da kullun): 12KByte/s
Filasha	16 MBytes KO Flash, don fonts, hotuna da fayilolin mai jiwuwa. Sake sake rubutawa: sama da sau 100,000
Fadada filashin filashi	Akwai ramukan haɓaka uku, suna tallafawa faɗaɗa NOR Flash da NAND Flash. Matsakaicin fadada don NOR Flash ya kai 64Mbytes. Lokacin haɗa NOR Flash da NAND Flash, matsakaicin faɗaɗawa shine har zuwa 48Mbytes (amfani da ramin faɗaɗa biyu) + 512Mbytes.
Buzzer	3V m buzzer
Ramin katin SD	Yana goyan bayan zazzage duk fayiloli (fayil ɗin UI mai amfani, fayilolin CFG, firmware na kernel), yana nuna ƙididdigar zazzagewa akan allon, ƙimar saukewa: 4 Mb/s. Lokacin zazzage fayiloli, katin SD yana buƙatar tsara shi a cikin tsarin FAT32, tare da shawarar rabon yanki na 4096
Ƙaddamar da ƙirar ƙirar ƙira	Yana goyan bayan soldering na WI-FI module da kebul download module. Samfurin WI-FI: WI-FI-10; Samfuran USB: HDL702, HDL703
Saukewa: PGT05	An yi amfani da shi don sake tsara tushen firmware na DGUS

Nuni Ma'auni

Nau'in LCD	TN tsari TFT LCD allon
Duban kusurwa	Matsakaicin kallon al'ada, 70°/70°/50°/70° (L/R/U/D)
Ƙaddamarwa	800×480 pixels (0°/90°/180°/270°)
Launi	16.7M launuka (24-bit 8R8G8B)
Yanki Mai Aiki (AA)	108.0mm (W) × 64.8mm (H)
Interface	RGB
Yanayin Hasken Baya	LED
Rayuwar Sabis na Hasken Baya	> 20000 hours (Lokacin haske yana raguwa zuwa 50% akan yanayin ci gaba da aiki tare da matsakaicin haske)
Haske	DMG80480C050_03WTC: 250nit
	DMG80480C050_03WTR: 250nit
	DMG80480C050_03WN: 300nit
Kula da Haske	0 ~ 100 (Lokacin da aka daidaita haske zuwa 1% ~ 30% na matsakaicin haske, flickering na iya faruwa kuma ba a ba da shawarar amfani da shi a cikin wannan kewayon)
Lura: Kuna iya amfani da bangon bangon bangon bangon bango mai ƙarfi don guje wa hotunan da ke haifar da ƙayyadaddun nunin shafi na dogon lokaci.

Taɓa Sigina

Nau'in	CTP (Kwamfutan taɓawa)
Interface	I²C
Tsarin	Tsarin G+G tare da murfin saman gilashin
Yanayin taɓawa	Taɓa aya ɗaya da goyan bayan taɓawar zamiya mai ci gaba
Taurin Sama	6H ku
Canjin Haske	>90%
Rayuwa	Sama da sau 1,000,000 suna taɓawa

Nau'in	RTP (Resistive touch panel)
Tsarin	WANNAN fim + WANNAN gilashi
Yanayin taɓawa	Taɓa aya ɗaya da goyan bayan taɓawar zamiya mai ci gaba
Taurin Sama	3H
Canjin Haske	> 80%
Rayuwa	Sama da sau 1,000,000 suna taɓawa

Serial Interface Parameters

Yanayin	UART2: ON=TTL/CMOS; KASHE=RS232 UART4: ON=TTL/CMOS; KASHE=RS232(Sai dai akwai bayan tsarin OS)
Matsayin Wutar Lantarki	Yanayin Gwajin	Min	Nau'in	Max	Naúrar
	Fitowa 1, Iout = -4mA	2.7	3.2	-	IN
	Fitowa 0, Iout = 4mA	-	0.1	0.4	IN
	Shigarwa 1	2.4	3.3	5.5	IN
	Shigarwa 0	-	-	1.0	IN
Baud Rate	3150 ~ 3225600bps, matsakaicin darajar 115200bps
Tsarin Bayanai	UART2: N81 UART4: N81/E81/O81/N82, 4 halaye (tsarin OS)
Kebul na Interface	10Pin_1.0mm

Bayanan lantarki