Ƙayyadaddun bayanai
| Saukewa: T5L0-Q88 | T5L0-Q88 ASIC ƙaramin fakiti ne, ƙaramin ƙarfi, mai tsada, GUI da aikace-aikacen da aka haɗa sosai-chipdual-core ASIC wanda DWIN Technology ke tsara don ƙananan girman LCD da taro da aka samar a cikin 2023. | ||
| Launi | 262K launuka | ||
| Nau'in LCD | IPS, TFT LCD | ||
| Duban kusurwa | Mala'ikan kallo mai faɗi, ƙimar ƙimar 85°/85°/85°/85°(L/R/U/D) | ||
| Wurin Nuni (AA) | 71.86mm (W) × 70.18mm (H) | ||
| Ƙaddamarwa | 480×480 | ||
| Hasken baya | LED | ||
| Haske | DMG48480F040_02WTCZ02:50nit | ||
| Wutar Lantarki | 4.5 ~ 5.5V | ||
| Aiki Yanzu | 280mA VCC=5V, max hasken baya | ||
| 100mA VCC=5V, an kashe hasken baya | |||
| Yanayin Aiki | -10 ℃ ~ 60 ℃ | ||
| Ajiya Zazzabi | -20 ℃ ~ 70 ℃ | ||
| Humidity Aiki | 10% ~ 90% RH, ƙimar al'ada na 60% RH | ||
| Interface mai amfani | 24Pin_0.5mm FPC | ||
| Baud Rate | 3150 ~ 3225600bps | ||
| Fitar Wutar Lantarki | Fitowa 1; 3.0 ~ 3.3 V | ||
| Fitowa 0;0 ~ 0.3 V | |||
|
Input Voltage | Ƙaddamarwa 1 3.3V | ||
| Shigarwa 0 0 ~ 0.5V | |||
| Interface |
UART2: TTL; UART3: TTL; (Sai dai ana samun bayan tsarin OS UART4: TTL; (Sai dai ana samun bayan tsarin OS) | ||
| Tsarin Bayanai |
UART2: N81; UART3: N81/E81/O81/N82; 4 halaye (tsarin OS) UART4: N81/E81/O81/N82; 4 halaye (tsarin OS) | ||
| PIN | Ma'anarsa | Nau'in | Bayanin Aiki |
| 1 | CAN_TX | O | CAN Interface (CAN interface (Ana buƙatar na'urar CAN na waje. Dubi 5 don bayanin kewayawa)) |
| 2 | CAN_RX | I | |
| 3 | TX3 | O | UART3Fitowa |
| 4 | RX3 | I | UART3Shigarwa |
| 5 | TX2 | O | UART2 fitarwa |
| 6 | RX2 | I | Shigarwar UART2 |
| 7 | TR4 | - | - |
| 8 | TX4 | O | UART4 fitarwa |
| 9 | RX4 | I | UART4 Shigar |
| 10 | TX1 | O | UART1 fitarwa |
| 11 | RX1 | I | UART1 shigarwa |
| 12 | Farashin 0ADC | I | Shigar ADC . 12-bit ƙuduri idan akwai 3.3V wutan lantarki. 0-3.3V shigar da ƙarfin lantarki. Ban da AD6, sauran bayanan ana aika zuwa OS core ta UART3 a ainihin lokacin tare da ƙimar samfurin 16KHz. |
| 13 | Bayanin ADC1 | I | |
| 14 | NTC1 | I | NTCa tsakiyar PCB |
| 15 | NTC2 | I | NTC ya rufe |
| 16 | Bayani na PWM3 | O | Direban Buzzer/Speaker. Ya kamata a ja da resistor na waje na 10K zuwa ƙasa don tabbatar da cewa ikon-kan yana da ƙananan matakin.Ana iya sarrafa tushen OS a ainihin lokacin ta hanyar UART3. |
| 17 | GND | P | GND |
| 18 | GND | P | |
| 19 | +5V | P | Wutar lantarki, DC4.5-5.5V. |
| 20 | +5V | P | |
| ashirin da daya | I2C_SDA | IO | RTC / firikwensin kusanci / firikwensin danshi mai yawa. |
| ashirin da biyu | I2C_SCL | IO | |
| ashirin da uku | EX1 | IO | Katsewa na waje (INT1) |
| ashirin da hudu | EX0 | IO | Katsewa na waje (INT0) |
