Ƙayyadaddun bayanai
| T5L2 ASIC*3 | DWIN da kansa ya haɓaka, samarwa da yawa a cikin 2019; Fasahar ɓoyayyiyar haƙƙin mallaka tana tabbatar da tsaro na lamba da bayanai; ƙarancin amfani da wutar lantarki, ƙarfin hana tsangwama mai ƙarfi, sauƙin wuce gwajin EMC/EMI tare da ƙirar PCB mai gefe biyu |
| Mai amfani dubawa | 8Pin_2.0mm soket don samar da wutar lantarki da sadarwar serial. Ƙimar zazzagewa (ƙimar ta yau da kullun): 12KByte/s |
| Filasha | 32MBytes (2*16MBytes NOR Flash), ana iya amfani da shi don adana fayilolin UI mai amfani kamar fonts, hotuna, kiɗa, da sauransu, tare da gogewa / rubuta hawan keke> sau 100,000 |
| Fadada filashin filashi | Akwai ramukan haɓakawa guda biyu, suna tallafawa faɗaɗa NOR Flash da NAND Flash. Matsakaicin fadada don NOR Flash ya kai 64Mbytes. Lokacin haɗa NOR Flash da NAND Flash, matsakaicin haɓaka yana zuwa 48Mbytes (amfani da ramukan haɓakawa guda biyu) + 512Mbytes (Cikin garkuwa) |
| Buzzer | 3V m buzzer |
| Mai magana da magana | 2Pin_2.0mm soket, mai magana da magana |
| RTC | Super-capacitor yana ba da ƙarfi ga RTC, daidaito: ± 20ppm @25 ℃. Zai iya kula da aiki na yau da kullun na kwanaki 7 bayan kashe wutar lantarki. Da'irar da'ira mai dacewa da maɓalli tantanin halitta. |
| Ramin katin SD | Yana goyan bayan zazzage duk fayiloli (fayil ɗin UI mai amfani, fayilolin CFG, firmware na kernel), yana nuna ƙididdigar zazzagewa akan allon, ƙimar saukewa: 4 Mb/s. Lokacin zazzage fayiloli, katin SD yana buƙatar tsara shi a cikin tsarin FAT32, tare da shawarar rabon yanki na 4096 |
| Ƙaddamar da ƙirar ƙirar ƙira | Yana goyan bayan soldering na WI-FI module da kebul download module. Samfurin WI-FI: WI-FI-10; Samfuran USB: HDL702, HDL703 |
| Saukewa: PGT05 | An yi amfani da shi don sake tsara tushen firmware na DGUS |
| Nau'in LCD | IPS tsarin TFT LCD allon |
| Duban kusurwa | Babban kusurwar kallo (masu ƙima sune 85 ° / 85 ° / 85 ° / 85 °), babban bambanci, da haɓaka launi mai kyau. |
| Ƙaddamarwa | 1920×1080 pixels (0°/90°/180°/270°) |
| Launi | 24-bit 8R8G8B |
| Yanki Mai Aiki (AA) | 476.1mm (W) × 267.9mm (H) |
| Yanayin Hasken Baya | LED |
| Rayuwar Sabis na Hasken Baya | > 20000 hours (Lokacin haske yana raguwa zuwa 50% akan yanayin ci gaba da aiki tare da matsakaicin haske) |
| Haske | 150 nit |
| Kula da Haske | 0 ~ 100 (Lokacin da aka daidaita haske zuwa 1% ~ 30% na matsakaicin haske, flickering na iya faruwa kuma ba a ba da shawarar amfani da shi a cikin wannan kewayon) |
| Lura: Kuna iya amfani da bangon bangon bangon bangon bango mai ƙarfi don guje wa hotunan da ke haifar da ƙayyadaddun nunin shafi na dogon lokaci. | |
| Nau'in | CTP (Karfafa taɓawa) |
| Tsarin | Tsarin G + FF tare da murfin saman gilashin |
| Yanayin taɓawa | Taimako wurin taɓawa da ja |
| Taurin Sama | 6H ku |
| Canjin Haske | >90% |
| Rayuwa | Sama da sau 1,000,000 suna taɓawa |
| Yanayin | UART2: ON=TTL/CMOS; KASHE=RS232 | |||||
| Matsayin Wutar Lantarki | Yanayin Gwajin | Min | Nau'in | Max | Naúrar | |
| Fitowa 1, Iout = -4mA | 4.78 | 5.0 | - | IN | ||
| Fitowa 0, Iout = 4mA | - | - | 0.4 | IN | ||
| Shigarwa 1 | 2.5 | 5.0 | - | IN | ||
| Shigarwa 0 | - | - | 1.0 | IN | ||
| Baud Rate | 3150 ~ 3225600bps, matsakaicin darajar 115200bps | |||||
| Tsarin Bayanai |
UART2: N81 | |||||
| Kebul na Interface | 8Pin_2.0mm | |||||
| Ƙarfin Ƙarfi | 20.4W | |||||
| Aiki Voltage | 15 ~ 36V, matsakaicin darajar 24V | |||||
| Aiki Yanzu | 850mA | VCC=24V, max hasken baya | ||||
| 225mA ku | VCC=24V, an kashe hasken baya | |||||
| Shawarar wutar lantarki: 24V 1A DC | ||||||
| Yanayin Aiki | 0 ℃ ~ 50 ℃ (24V @ 60% RH) | |||||
| Ajiya Zazzabi | -20 ℃ ~ 60 ℃ | |||||
| Rubutun Conformal | Babu | |||||
| Humidity Mai Aiki | 10% ~ 90% RH, ƙimar al'ada na 60% RH | |||||
