8.0 Inch CVBS Camera Screen DMT80600T080_25W

Video Specification ASIC T5L1 ASIC Developed by DWIN. Mass production in 2019,1MBytes Nor Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times Hardware and Interface Description LCM interface FPC50_0.5mm, RGB interface TP interface CTP: FPC6_0.5mm, IIC interface RTP: 4Pin_1.0mm interface User interface 8Pin_2.54mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s Flash 16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times Buzzer 3V passive buzzer. Power: <1W Speaker interface 2Pin_ 2.0mm external loudspeaker RTC Button cell for power supply. Accuracy: ±20ppm @25℃ SD  card interface FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s Camera interface 2pin_2.0mm(Support CVBS analog signal input,both N system and P system) PGT05 interface When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal Display Parameters LCD Type TN, TFT LCD Viewing Angle Normal viewing angle, 70°/70°/50°/70° (L/R/U/D) Resolution 800×600 pixels (support 0°/90°/180°/270°) Color 16-bit 5R6G5B Active Area (A.A.) 162.60mm (W)×122.20mm (H) Backlight Mode LED Backlight Service Life >20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness) Brightness DMT80600T080_25WTC: 300nit DMT80600T080_25WTR: 250nit Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) Note: You can use dynamic screen saver wallpapers to avoid after images caused by fixed page display for a long time. Touch Parameters Type CTP (Capacitive touch panel) Structure G+G structure with surface cover of tempered glass Touch Mode Support point touch and drag Surface Hardness 6H Light Transmittance Over 90% Life Over 1,000,000 times touch    Type RTP (Resistive touch panel) Structure ITO film + ITO glass Touch Mode Support point touch and drag Surface Hardness 3H Light Transmittance Over 80% Life Over 1,000,000 times touch Serial Interface Parameters Mode UART2: ON=TTL/CMOS; OFF=RS232(Defaulted RS232) UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration) Voltage Level Test Condition Min Typ Max Unit Output 1, Iout = -4mA 2.7 3.2 - V Output 0, Iout = 4mA - 0.1 0.4 V Input 1 2.4 3.3 5.5 V Input 0 0 - 1.0 V Baud Rate 3150~3225600bps, typical value of 115200bps Data Format UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration) Interface Cable 8Pin_2.54mm Electrical specifications Rated Power <5W Operating Voltage 6~36V, typical value of 12V Operating Current 320mA VCC=12V, max backlight 120mA VCC=12V, backlight off Recommended power supply: 12V 0.5A DC Operating environment Operating Temperature -20℃~70℃ (12V @ 60% RH) Storage Temperature -30℃~80℃ Conformal Coating Yes Operating Humidity 10%~90%RH, typical value of 60% RH Peripheral DMT80600T080_25WTR Resistive touch panel, speaker, CVBS video input, build-in RTC DMT80600T080_25WTC Capacitive touch panel, speaker, CVBS video input, build-in RTC