Specification
![国际站PCB模板](https://ecdn6.globalso.com/upload/p/1355/source/2024-03/65f963bf82dc348203.jpg)
T5L1 ASIC | Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times | |||||
LCM interface | FPC40_0.5mm, RGB interface | |||||
RTP interface | FPC4_1.0mm | |||||
User interface | 10Pin_3.81mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s | |||||
Flash | 32MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times | |||||
Expand Flash | Expandable to 64Mbytes NOR Flash or 48Mbytes NOR Flash +512Mbytes NAND Flash | |||||
Speaker | Onboard speaker. Power: <2W | |||||
RTC | Super-capacitor for power supply. Accuracy: ±20ppm@25℃. It can work normally for 7 days after power failure | |||||
SD card interface | FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s | |||||
Reserved module interface | Wi-Fi module: connect to the cloud platform to update remotely USB module: download files by USB flash disk | |||||
PGT05 interface | When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal |
LCD Type | IPS-TFT-LCD |
Viewing Angle | Wide viewing angle, 85°/85°/85°/85°(L/R/U/D) |
Resolution | 800×480 pixels (support 0°/90°/180°/270°) |
Color | 24-bit 8R8G8B |
Active Area (A.A.) | 152.40mm (W)×91.40mm (H) |
View Area (V.A.) | - |
Backlight Mode | LED |
Backlight Service Life | >50000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness) |
Brightness | DMG80480S070_03WN:1000nit DMG80480S070_03WTR:800nit |
Brightness Control | 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) |
Type | RTP (Resistive touch panel) |
Structure | ITO glass + ITO film |
Touch Mode | Support point touch and drag |
Surface Hardness | 3H |
Light Transmittance | Over 80% |
Life | Over 1,000,000 times touch |
Mode | UART2: RS232 UART4: RS232( Only available after OS configuration) UART5: RS485( Only available after OS configuration) CAN*1 |
|||||
UART2,4 Voltage Level |
Test Condition | Min | Typ | Max | Unit | |
Output 1 | - | -5.0 | -3.0 | V | ||
Output 0 | 3.0 | 5.0 | - | V | ||
Input 1 | -15.0 | -5.0 | - | V | ||
Input 0 | - | 5.0 | 15.0 | V | ||
UART2,4 Baud Rate |
3150~3225600bps, typical value of 115200bps | |||||
UART5 Voltage Level |
Test Condition | Min | Typ | Max | Unit | |
Output 1 | 2.5 | 5.0 | - | V | ||
Output 0 | - | -5.0 | -2.5 | V | ||
Input 1 | 0 | 2.5 | - | V | ||
Input 0 | - | -2.5 | -0.2 | V | ||
UART5 Baud Rate |
3150~921600bps, typical value of 115200bps | |||||
Data Format | UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (OS configuration) UART5: N81/E81/O81/N82 ,4 modes (OS configuration) |
|||||
Interface Cable | 10Pin_3.81mm |
Rated Power | <6W | |||||
Operating Voltage | 7~36V, typical value of 12V | |||||
Operating Current | 430mA | VCC=12V, max backlight | ||||
60mA | VCC=12V, backlight off | |||||
Recommended power supply: 12V 1A DC |
Operating Temperature | -40℃~85℃ (12V @ 60% RH) | |||||
Storage Temperature | -40℃~85℃ | |||||
Conformal Coating | Yes | |||||
Operating Humidity | 10%~90%RH, typical value of 60% RH |
DMG80480S070_03WN | No touch,RTC, Speaker |
DMG80480S070_03WTR | Resistive touch, RTC, Speaker |