7.0 Inch Industrial Grade Digtal Video Screen<br/>Model:DMG80480T070_41W

Video Specification Hardware and interface description User interface 8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s NOR Flash 32MBytes (2*16MBytes NOR Flash), can be used to store user UI files such as fonts, images, music, etc., with erase/write cycles >100,000 times NAND Flash 512Mbytes, used to store R11 firmware Buzzer 3V passive buzzer SD card slot 1 Supports SD card image, audio, and video playback. It can also be used to export camera screenshot files (JPEG) or video files (MP4) SD card slot 2 Supports downloading of all files (user UI files, CFG files, underlying kernel firmware), displays download statistics on the screen, downloadrate: 4Mb/s. When downloading files, the SD card needs to be formatted in FAT32 format, with a recommended allocation unit size of 4096. Speaker 2Pin_ 2.0mm interface, external speaker USB interface R11_USB: Horizontal USB interface, Used for firmware burning. USB interface: Horizontal USB interface, can connect to USB camera or play USB files Reserved module solder pads This product has reserved 4G modules, Ethernet interfaces (RJ45 socket),and WIFI module pads. Expandable remote update video function and network camera function, communicate with corresponding business if there are related needs Display Parameters LCD Type TN process TFT display screen Viewing Angle Normal viewing angle, 70°/70°/50°/70° (L/R/U/D) Resolution 800×480 pixels (support 0°/90°/180°/270°) Color 16.7M color (24-bit 8R8G8B) Active Area (A.A.) 154.08mm (W)×85.92mm (H) Interface RGB Backlight Mode LED Backlight Service Life >30000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness) Brightness DMG80480T070_41WTC: 250nit DMG80480T070_41WTR: 200nit DMG80480T070_41WN: 300nit Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. Touch Parameters Type CTP (Capacitive touch panel) Interface I²C Structure G+G structure with surface cover of tempered glass Touch Mode Single point touch and support continuous sliding touch Surface Hardness 6H Light Transmittance >85% Life Over 1,000,000 times touch    Type RTP (Resistive touch panel) Structure ITO film + ITO glass Touch Mode Single point touch and support continuous sliding touch Surface Hardness 3H Light Transmittance 78%±3% Life Over 1,000,000 times touch Serial Interface Parameters Mode UART2: ON=TTL/CMOS; OFF=RS232 Voltage Level Test Condition Min Typ Max Unit Output 1, Iout = -4mA 4.78 5.0 - V Output 0, Iout = 4mA - - 0.4 V Input 1 2.5 5.0 - V Input 0 - - 1.0 V Baud Rate 3150~3225600bps, typical value of 115200bps Data Format UART2: N81 Interface Cable 8Pin_2.0mm Electrical specifications Rated Power <3W Operating Voltage 7~36V, typical value of 12V Operating Current 230mA VCC=12V, max backlight 90mA VCC=12V, backlight off Recommended power supply: 12V 1A DC Operating environment Operating Temperature -20℃~70℃ (12V @ 60% RH) Storage Temperature -30℃~80℃ Conformal Coating Yes Operating Humidity 10%~90%RH, typical value of 60% RH Application