7.0 Inch FSK bus camera scheme screen
Model:DMG10600T070_26W(Industrial Grade)

Features:

● Based on T5L2, running DGUS II system, industrial grade.

● 7.0-inch, 1024*600 pixels resolution, 16.7M colors, IPS-TFT-LCD, wide viewing angle.

● Video play,Music play are supported

● FSK camera interface: RCA-AV socket or 2Pin_5.08mm socket

● With Speaker,Buzzer,RTC


Specification

Product Tags

Specification

国际站PCB模板
ASIC
T5L2 ASIC Developed by DWIN. Mass production in 2019,1MBytes Nor Flash on the
chip, 512KBytes used to store the user database. Rewrite cycle: over
100,000 times
Hardware and interface description
LCM interface FPC50_0.5mm, RGB interface
TP interface CTP: COB structure, IIC interface
RTP: 4Pin_1.0mm interface
User interface 8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash 32 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Expand Flash Expandable to 64Mbytes NOR Flash or 48Mbytes NOR Flash+512Mbytes NAND Flash
Buzzer 3V passive buzzer. Power: <1W
RTC Super-capacitor for power supply. Accuracy: ±20ppm@25℃. It can work normally for 7 days after power failure
SD  card interface FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
FSK camera interface RCA-AV socket or 2Pin_5.08mm socket
Reserved module interface Wi-Fi module: connect to the cloud platform to update remotely USB module: download files by USB flash disk
PGT05 interface When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal
Display Parameters
LCD Type IPS, TFT LCD
Viewing Angle Wide viewing angle, 85°/85°/85°/85°(L/R/U/D)
Resolution 1024×600 pixels (support 0°/90°/180°/270°)
Color 24-bit 8R8G8B
Active Area (A.A.) 154.08mm (W)×85.92mm (H)
Backlight Mode LED
Backlight Service Life >30000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
Brightness DMG10600T070_26WTC: 250nit
DMG10600T070_26WTR: 250nit
Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.
Touch Parameters
Type CTP (Capacitive touch panel)
Structure G+G structure with surface cover of tempered glass
Touch Mode Support point touch and drag
Surface Hardness 6H
Light Transmittance Over 90%
Life Over 1,000,000 times touch
  
Type RTP (Resistive touch panel)
Structure ITO film + ITO glass
Touch Mode Support point touch and drag
Surface Hardness 3H
Light Transmittance Over 80%
Life Over 1,000,000 times touch
Serial Interface Parameters
Mode UART2: ON=TTL/CMOS; OFF=RS232
UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration)
Voltage Level Test Condition Min Typ Max Unit
Output 1, Iout = -4mA 2.7 3.2 - V
Output 0, Iout = 4mA - 0.1 0.4 V
Input 1 2.4 3.3 5.5 V
Input 0 0 - 1.0 V
Baud Rate 3150~3225600bps, typical value of 115200bps
Data Format UART2: N81
UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable 8Pin_2.0mm
Electrical specifications
Rated Power <5W
Operating Voltage 12~36V, typical value of 12V
Operating Current 260mA VCC=12V, max backlight (No camera)
110mA VCC=12V, backlight off (No camera)
Recommended power supply: 12V 1A DC
Operating environment
Operating Temperature -20℃~70℃ (12V @ 60% RH)
Storage Temperature -30℃~80℃
Conformal Coating Yes
Operating Humidity 10%~90%RH, typical value of 60% RH
Peripheral
DMG10600T070_26WTC Capacitive touch panel, FSK camera interface, RTC
DMG10600T070_26WTR Resistive touch panel, FSK camera interface, RTC
工业级别应用图片共用

  • Previous:
  • Next:

  • Related Products