5 Inch HMI TFT LCD Module With Shell  DMG80480T050_A5W (Industrial Grade)

Video Specification ASIC T5L1 ASIC Developed by DWIN. Mass production in 2019,1MBytes Nor Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times Hardware and interface description LCM interface FPC40_0.5mm, RGB interface TP interface Capacitive touch panel: COB structure, IIC interface Resistive touch panel: 4Pin_1.0mm interface User interface 8Pin_3.81mm socket for power supply andserial communication. Download rate(typical value): 12KByte/s Flash 16MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times Expand Flash Expandable to 64Mbytes NOR Flash or 48Mbytes NOR Flash+512Mbytes NAND Flash Speaker Onboard speaker. Power: <2W RTC Super-capacitor for power supply. Accuracy: ±20ppm@25℃. It can work normally for 7 days after power failure SD  card interface FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s PGT05 interface When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal Display Parameters LCD Type IPS, TFT LCD Viewing Angle Wide viewing angle, 85°/85°/85°/85°(L/R/U/D) Resolution 800×480 pixels (support 0°/90°/180°/270°) Color 24-bit 8R8G8B Active Area (A.A.) 108.8mm (W) ×65.6mm (H) Backlight Mode LED Backlight Service Life >30000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness) Brightness DMG80480T050_A5WTC: 300nit DMG80480T050_A5WTR: 250nit Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range) Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. Touch Parameters Type CTP (Capacitive touch panel) Structure G+G structure with surface cover of tempered glass Touch Mode Support point touch and drag Surface Hardness 6H Light Transmittance Over 90% Life Over 1,000,000 times touch    Type RTP (Resistive touch panel) Structure ITO film + ITO glass Touch Mode Support point touch and drag Surface Hardness 3H Light Transmittance Over 80% Life Over 1,000,000 times touch Serial Interface Parameters Mode UART2: RS232 UART4: RS485 (Only available after OS configuration) UART5: RS232 (Only available after OS configuration) UART2,4 Voltage Level Test Condition Min Typ Max Unit Output 1 - -5.0 -3.0 V Output 0 3.0 5.0 - V Input 1 -15.0 -5.0 - V Input 0 - 5.0 15.0 V UART2,4 Baud Rate 3150~3225600bps, typical value of 115200bps UART5 Voltage Level Test Condition Min Typ Max Unit Output 1 2.5 5.0 - V Output 0 - -5.0 -2.5 V Input 1 0 2.5 - V Input 0 - -2.5 -0.2 V UART5 Baud Rate 3150~921600bps, typical value of 115200bps Data Format UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (O Sconfiguration) UART5: N81/E81/O81/N82 ,4 modes (O Sconfiguration) Interface Cable 8Pin_3.81mm Socket Electrical specifications Rated Power <5W Operating Voltage 7~36V, typical value of 12V Operating Current 160mA VCC=12V, max backlight 80mA VCC=12V, backlight off Recommended power supply: 12V 1A DC Operating environment Operating Temperature -20℃~70℃ (12V @ 60% RH) Storage Temperature -30℃~80℃ Operating Humidity 10%~90%RH, typical value of 60% RH Conformal Coating Yes Anti-UV Yes Protective Level IP65 (Front) Application