4.3 Inch HMI TFT LCD <br/>Model: DMG80480T043_01W(Industrial Grade)

Video Specification Hardware and interface description LCM interface FPC40_0.5mm, TTL interface TP interface Capacitive touch: COB structure, IIC interface Resistive touch: FPC4_1.0mm User interface 8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s Flash 16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times Expand Flash Expandable to 64Mbytes NOR Flash or 48Mbytes NOR Flash+512Mbytes NAND Flash.When expanding Flash, components such as decoders and capacitors need to be soldered. Please consult the corresponding sales person for relevant customization (Located inside the shielding cover) Buzzer 3V passive buzzer. Power: <1W RTC Super-capacitor for power supply. Accuracy: ±20ppm@25℃. It can work normally for 7 days after power failure SD card interface FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s Reserved module interface Wi-Fi module: connect to the cloud platform to update remotely; USB module: download files by USB flash disk PGT05 interface When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal Display Parameters LCD Type IPS, TFT LCD Viewing Angle Wide viewing angle, 85°/85°/85°/85°（L/R/U/D） Resolution 480×800 pixels (support 0°/90°/180°/270°) Color 18-bit 6R6G6B Active Area (A.A.) 93.60mm (W)×56.16mm (H) Backlight Mode LED Backlight Service Life >30000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness) Brightness DMG80480T043_01WTC: 250nit DMG80480T043_01WTR: 250nit DMG80480T043_01WN: 300nit Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. Touch Parameters Type CTP (Capacitive touch panel) Structure G+G structure with surface cover of tempered glass Touch Mode Single touch and support continuous sliding touch Surface Hardness 6H Light Transmittance Over 90% Life Over 1,000,000 times touch    Type RTP (Resistive touch panel) Structure ITO film + ITO glass Touch Mode Single touch and support continuous sliding touch Surface Hardness 3H Light Transmittance Over 80% Life Over 1,000,000 times touch Serial Interface Parameters Mode UART2: ON=TTL/CMOS; OFF=RS232 UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration) Voltage Level Test Condition Min Typ Max Unit Output 1, Iout = -4mA 4.78 5.0 - V Output 0, Iout = 4mA - - 0.4 V Input 1 2.5 5.0 - V Input 0 0 - 1.0 V Baud Rate 3150~3225600bps, typical value of 115200bps Data Format UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration) Interface Cable 8Pin_2.0mm Electrical specifications Rated Power <5W Operating Voltage 6~36V, typical value of 12V Operating Current 130mA VCC=12V, max backlight 60mA VCC=12V, backlight off Recommended power supply: 12V 1A DC Operating environment Operating Temperature -20℃~70℃ (12V @ 60% RH) Storage Temperature -30℃~80℃ Conformal Coating Yes Operating Humidity 10%~90%RH, typical value of 60% RH Application